1983 Toyota Pickup Radiator Coolant Hose

Part Name: Radiator Coolant HoseBrand: DaycoPart#: 71383

Dayco Radiator Coolant Hose 71383 - Lower - Pipe To Water Pump

Position: Lower - Pipe To Water Pump

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Dual I.D. Hose
Trunk Height : 7 3/4
End 1 Inside Diameter : 1 5/16
End 2 Inside Diameter : 1 7/16
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Condition: New

Fitments
This Part Fits Following 1983 Toyota Pickup Engines.
Engine Sub Model Notes Fit Notes Position
2.4L L4 Base, DLX, SR5 Curved Radiator Hose Drive Type: 4WD Lower - Pipe To Water Pump
Part Interchange
ACDelco 20075S
Atlas MC149
BMW 1.309.606.2
BMW 11 53 1 306 6882
BMW 1.309.688.2
Beck/Arnley 142-5980
CARQUEST 20801
Duralast B71383
Freshstart 361
Gates 20801
Goodyear 61422
NAPA 7564
Toyota 16573-38020
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.4L L4	Base, DLX, SR5	Curved Radiator Hose	Drive Type: 4WD	Lower - Pipe To Water Pump

Part Name: Radiator Coolant HoseBrand: GatesPart#: 20801

1983 Toyota Pickup Radiator Coolant Hose ZO 20801

Gates Radiator Coolant Hose 20801 - Lower - Engine To Pipe

Position: Lower - Engine To Pipe

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 12.7
Inside Diameter 1 : 1.26
Inside Diameter 2 : 1.5
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1983 Toyota Pickup Engines.
Engine Sub Model Notes Fit Notes Position
2.4L L4 Base, DLX, SR5 Cut to fit - Molded Coolant Hose Fuel Type: GAS - Drive Type: 4WD Lower - Engine To Pipe
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.4L L4	Base, DLX, SR5	Cut to fit - Molded Coolant Hose	Fuel Type: GAS - Drive Type: 4WD	Lower - Engine To Pipe

Part Name: Radiator Coolant HoseBrand: DaycoPart#: 81021

1983 Toyota Pickup Radiator Coolant Hose DY 81021

Dayco Radiator Coolant Hose 81021 - Lower - Pipe To Radiator, Upper

Position: Lower - Pipe To Radiator, Upper

Description:

FLEX RADIATOR HOSE STANDARD DAYCO

Features:

Precision molded in standard lengths, Dayco’s Flex Radiator Hose is designed to replace straight or molded radiator hoses. The knitted reinforcement and synthetic EPDM construction meets SAE J20R4, Class D-2 requirements. This hose is designed to prevent splitting, ballooning, and elongation; and, resists ozone and other detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). The corrugations provide excellent hose flexibility without flattening or collapse. This Flex Radiator Hose is another Dayco® product proudly made in the USA. Note: This hose is NOT suitable for fuel or oil transfer.

Condition: New

Fitments
This Part Fits Following 1983 Toyota Pickup Engines.
Engine Sub Model Notes Fit Notes Position
2.2L L4 DLX, SR5 Flex Radiator Hose Upper
2.4L L4 Base, DLX, SR5 Flex Radiator Hose Drive Type: 4WD Lower - Pipe To Radiator

Engine	Sub Model	Notes	Fit Notes	Position
2.2L L4	DLX, SR5	Flex Radiator Hose		Upper
2.4L L4	Base, DLX, SR5	Flex Radiator Hose	Drive Type: 4WD	Lower - Pipe To Radiator

Part Interchange

ACDelco	31609
Atlas	516
Atlas	525
AutoZone	C6403
Autopar	RH62
BMW	105 51 01 628 00
Bowes	1109
CARQUEST	25250
Chief	C6403
Conoco	FH18
Duralast	81021
Ford	C6TA-8260-Z
Ford	C9PZ-8260-V
Ford	C2RZ-8260-A
Freshstart	1109
Gates	26403
Gates	25250
Goodyear	52010
Gulf	5010
John Deere	T25033
Mobil	5M9
Mopar	BH602
Motorcraft	KA094
NAPA	FM80
Pirelli	509
Texaco	1109
Texaco	136
Uniroyal	5010
Uniroyal	FC516
V&W	1109

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: Radiator Coolant HoseBrand: DaycoPart#: 81091

1983 Toyota Pickup Radiator Coolant Hose DY 81091

Dayco Radiator Coolant Hose 81091 - Lower

Position: Lower

Description:

FLEX RADIATOR HOSE STANDARD DAYCO

Features:

Precision molded in standard lengths, Dayco’s Flex Radiator Hose is designed to replace straight or molded radiator hoses. The knitted reinforcement and synthetic EPDM construction meets SAE J20R4, Class D-2 requirements. This hose is designed to prevent splitting, ballooning, and elongation; and, resists ozone and other detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). The corrugations provide excellent hose flexibility without flattening or collapse. This Flex Radiator Hose is another Dayco® product proudly made in the USA. Note: This hose is NOT suitable for fuel or oil transfer.

Condition: New

Fitments
This Part Fits Following 1983 Toyota Pickup Engines.
Engine Sub Model Notes Fit Notes Position
2.4L L4 Base, DLX, SR5 Flex Radiator Hose Drive Type: RWD Lower

Engine	Sub Model	Notes	Fit Notes	Position
2.4L L4	Base, DLX, SR5	Flex Radiator Hose	Drive Type: RWD	Lower

Part Interchange

ACDelco	31623
Atlas	534
AutoZone	C6409
Autopar	RH22
Bowes	1119S
CARQUEST	25305
Chief	C6409
Conoco	FH77
Duralast	81091
Ford	75EB-8286CA
Ford	D2ZE-8B273-AC
Ford	C2RZ-8260-N
Ford	C9PZ-8286-T
Ford	E6DZ-8260-D
Freshstart	1119
Gates	25305
Gates	26409
Goodyear	52020
Gulf	6520
Mobil	5M19
Mopar	BH605
Motorcraft	KAB194
NAPA	FM78
Pirelli	519
Pirelli	521
Pirelli	520
Texaco	1119
Texaco	133
Uniroyal	6520
V&W	1119

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: Radiator Coolant HoseBrand: GatesPart#: 25252

1983 Toyota Pickup Radiator Coolant Hose ZO 25252

Gates Radiator Coolant Hose 25252 - Upper

Position: Upper

Description:

Flexible Coolant Hose Standard

Part Specifications:

Centerline Length : 15
Inside Diameter 1 : 1.25

Features:

Gates Vulco-Flex(R) II hose will bend in almost any direction. It easily replicates the angles and planes of a wide variety of expensive original equipment coolant hose, for quick, easy replacement.
- Improved sealing surface for greater leak resistance and increased flexibility for easier installation.
- Heat and ozone resistant cover.
- Rated for SAE 20R5 Class D-2 performance.
- High temperature rating up to +257 Deg. F (+125 Deg. C).
Note: Gates recommends replacing clamps each time a new coolant hose is installed.
Caution: Do not use for fuel or oil transfer applications.
Gates Powering Progess

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 1983 Toyota Pickup Engines.
Engine Sub Model Notes Fit Notes Position
2.4L L4 Base, DLX, SR5 Flexible Coolant Hose (Standard) Fuel Type: GAS Upper
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.4L L4	Base, DLX, SR5	Flexible Coolant Hose (Standard)	Fuel Type: GAS	Upper

Part Name: Radiator Coolant HoseBrand: DaycoPart#: 81031

1983 Toyota Pickup Radiator Coolant Hose DY 81031

Dayco Radiator Coolant Hose 81031 - Upper, Upper - Pipe To Radiator, Upper - Water Pump To Pipe

Position: Upper, Upper - Pipe To Radiator, Upper - Water Pump To Pipe

Description:

FLEX RADIATOR HOSE STANDARD DAYCO

Features:

Precision molded in standard lengths, Dayco’s Flex Radiator Hose is designed to replace straight or molded radiator hoses. The knitted reinforcement and synthetic EPDM construction meets SAE J20R4, Class D-2 requirements. This hose is designed to prevent splitting, ballooning, and elongation; and, resists ozone and other detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). The corrugations provide excellent hose flexibility without flattening or collapse. This Flex Radiator Hose is another Dayco® product proudly made in the USA. Note: This hose is NOT suitable for fuel or oil transfer.

Condition: New

Fitments
This Part Fits Following 1983 Toyota Pickup Engines.
Engine Sub Model Notes Fit Notes Position
2.4L L4 Base, DLX, SR5 Flex Radiator Hose Drive Type: RWD, 4WD Upper, Upper - Pipe To Radiator, Upper - Water Pump To Pipe

Engine	Sub Model	Notes	Fit Notes	Position
2.4L L4	Base, DLX, SR5	Flex Radiator Hose	Drive Type: RWD, 4WD	Upper, Upper - Pipe To Radiator, Upper - Water Pump To Pipe

Part Interchange

ACDelco	31610
Atlas	535
AutoZone	C6404
Autopar	RH19
Bowes	1110
Chief	C6404
Conoco	FH24
Datsun/Nissan	21501-20601
Duralast	81031
Fiat	4227246
Ford	C9PZ-8260-F
Ford	72EB-8260AA
Ford	7HF-8260AB
Ford	C2RZ-8260-AB
Ford	B5AA-8286-A
Freshstart	1111
Frigiking	71-01203
Gates	26404
Goodyear	52011
Goodyear	52012
Gulf	5011
Mobil	5M11
Mopar	BH603
Motorcraft	KA110
NAPA	FM70
Navistar	635319-R1
Pirelli	512
Renault	5548391
Texaco	1111
Texaco	106
Thermo-King	1082A64H02
Toyota	99522-01066
Uniroyal	5011
V&W	1111

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: Radiator Coolant HoseBrand: GatesPart#: 25250

1983 Toyota Pickup Radiator Coolant Hose ZO 25250

Gates Radiator Coolant Hose 25250 - Lower - Pipe To Radiator, Upper

Position: Lower - Pipe To Radiator, Upper

Description:

Flexible Coolant Hose Standard

Part Specifications:

Centerline Length : 9.5
Inside Diameter 1 : 1.25

Features:

Gates Vulco-Flex(R) II hose will bend in almost any direction. It easily replicates the angles and planes of a wide variety of expensive original equipment coolant hose, for quick, easy replacement.
- Improved sealing surface for greater leak resistance and increased flexibility for easier installation.
- Heat and ozone resistant cover.
- Rated for SAE 20R5 Class D-2 performance.
- High temperature rating up to +257 Deg. F (+125 Deg. C).
Note: Gates recommends replacing clamps each time a new coolant hose is installed.
Caution: Do not use for fuel or oil transfer applications.
Gates Powering Progess

Condition: New

Fitments

This Part Fits Following 1983 Toyota Pickup Engines.

Engine	Sub Model	Notes	Fit Notes	Position
2.2L L4	DLX, SR5	Flexible Coolant Hose (Standard)	Fuel Type: DIESEL	Upper
2.4L L4	Base, DLX, SR5	Flexible Coolant Hose (Standard)	Fuel Type: GAS - Drive Type: 4WD	Lower - Pipe To Radiator

Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: Radiator Coolant HoseBrand: DaycoPart#: 70846

1983 Toyota Pickup Radiator Coolant Hose DY 70846

Dayco Radiator Coolant Hose 70846 - Upper, Upper - Pipe To Radiator, Upper - Water Pump To Pipe

Position: Upper, Upper - Pipe To Radiator, Upper - Water Pump To Pipe

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 11
End 1 Inside Diameter : 1 1/4
End 2 Inside Diameter : 1 1/4
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Condition: New

Fitments

This Part Fits Following 1983 Toyota Pickup Engines.

Engine	Sub Model	Notes	Fit Notes	Position
2.2L L4	DLX, SR5	Cut to Fit - Curved Radiator Hose		Upper
2.4L L4	Base, DLX, SR5	Curved Radiator Hose	Drive Type: RWD, 4WD	Upper, Upper - Pipe To Radiator, Upper - Water Pump To Pipe

Part Interchange

ACDelco	20064S
ACDelco	20091S
Audi	06C.121.445A
CARQUEST	20774
CARQUEST	20940
Datsun/Nissan	21503-11M11
Datsun/Nissan	21503-11M02
Datsun/Nissan	21632-AR000
Duralast	B70846
Ford	D6TZ-8548-A
Ford	74EB-8260-AC
Ford	77FB-8260-AC
Gates	20940
Gates	20774
Goodyear	62661
Goodyear	60857
Kia	0K52Y-15-191C
NAPA	7537
NAPA	7665
Navistar	672242-C1
Navistar	672242-C2
Peugeot	1303.69
Suzuki	17841-65D10
Toyota	90916-01066
Toyota	16571-35040
Toyota	16571-35030
Toyota	16571-54130
Toyota	16571-54050
Toyota	16571-37010
Volvo Cars	476715

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: Radiator Coolant HoseBrand: GatesPart#: 25305

1983 Toyota Pickup Radiator Coolant Hose ZO 25305

Gates Radiator Coolant Hose 25305 - Lower

Position: Lower

Description:

Flexible Coolant Hose Standard

Part Specifications:

Centerline Length : 19.5
Inside Diameter 1 : 1.25
Inside Diameter 2 : 1.5

Features:

Gates Vulco-Flex(R) II hose will bend in almost any direction. It easily replicates the angles and planes of a wide variety of expensive original equipment coolant hose, for quick, easy replacement.
- Improved sealing surface for greater leak resistance and increased flexibility for easier installation.
- Heat and ozone resistant cover.
- Rated for SAE 20R5 Class D-2 performance.
- High temperature rating up to +257 Deg. F (+125 Deg. C).
Note: Gates recommends replacing clamps each time a new coolant hose is installed.
Caution: Do not use for fuel or oil transfer applications.
Gates Powering Progess

Condition: New

Fitments
This Part Fits Following 1983 Toyota Pickup Engines.
Engine Sub Model Notes Fit Notes Position
2.4L L4 Base, DLX, SR5 Flexible Coolant Hose (Standard) Fuel Type: GAS - Drive Type: RWD Lower
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.4L L4	Base, DLX, SR5	Flexible Coolant Hose (Standard)	Fuel Type: GAS - Drive Type: RWD	Lower

Part Name: Radiator Coolant HoseBrand: GatesPart#: 20774

1983 Toyota Pickup Radiator Coolant Hose ZO 20774

Gates Radiator Coolant Hose 20774 - Upper

Position: Upper

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 11.3
Inside Diameter 1 : 1.25
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1983 Toyota Pickup Engines.
Engine Sub Model Notes Fit Notes Position
2.2L L4 DLX, SR5 Cut to fit - Molded Coolant Hose Fuel Type: DIESEL Upper
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.2L L4	DLX, SR5	Cut to fit - Molded Coolant Hose	Fuel Type: DIESEL	Upper

Part Name: Radiator Coolant HoseBrand: DaycoPart#: 70842

1983 Toyota Pickup Radiator Coolant Hose DY 70842

Dayco Radiator Coolant Hose 70842 - Lower

Position: Lower

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Dual I.D. Hose
Trunk Height : 13
End 1 Inside Diameter : 1 5/16
End 2 Inside Diameter : 1 7/16
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Condition: New

Fitments
This Part Fits Following 1983 Toyota Pickup Engines.
Engine Sub Model Notes Fit Notes Position
2.2L L4 DLX, SR5 Curved Radiator Hose Lower
2.4L L4 Base, DLX, SR5 Cut to Fit - Curved Radiator Hose Drive Type: RWD Lower

Engine	Sub Model	Notes	Fit Notes	Position
2.2L L4	DLX, SR5	Curved Radiator Hose		Lower
2.4L L4	Base, DLX, SR5	Cut to Fit - Curved Radiator Hose	Drive Type: RWD	Lower

Part Interchange

ACDelco	22110M
Atlas	MC95
AutoZone	C1033
Beck/Arnley	142-5938
Beck/Arnley	142-3599
Beck/Arnley	142-5939
Beck/Arnley	142-5263
Beck/Arnley	142-5032
Beck/Arnley	142-5838
Beck/Arnley	142-5768
Beck/Arnley	142-5830
CARQUEST	21033
Datsun/Nissan	21503-36W05
Duralast	C70842
Freshstart	166
Gates	21033
Goodyear	61054
Goodyear	66557
Lazorlite	L34-5601
Mazda	8531-15-185
Mazda	D501-15-185
Mazda	8531-15-185A
Mazda	8325-15-185B
Motorcraft	KM1246
NAPA	7745
Pirelli	41054
Pirelli	MR138
Toyota	16572-38090
Toyota	16572-35010
Toyota	16572-35011
Toyota	16572-54050
Toyota	16572-38030
Toyota	16572-38012
Toyota	16572-38050

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: Radiator Coolant HoseBrand: DaycoPart#: 71292

1983 Toyota Pickup Radiator Coolant Hose DY 71292

Dayco Radiator Coolant Hose 71292 - Lower - Pipe To Radiator

Position: Lower - Pipe To Radiator

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 14 1/2
End 1 Inside Diameter : 1 5/16
End 2 Inside Diameter : 1 5/16
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Condition: New

Fitments
This Part Fits Following 1983 Toyota Pickup Engines.
Engine Sub Model Notes Fit Notes Position
2.4L L4 Base, DLX, SR5 Cut to Fit - Curved Radiator Hose Drive Type: 4WD Lower - Pipe To Radiator

Engine	Sub Model	Notes	Fit Notes	Position
2.4L L4	Base, DLX, SR5	Cut to Fit - Curved Radiator Hose	Drive Type: 4WD	Lower - Pipe To Radiator

Part Interchange

ACDelco	22208M
ACDelco	22132M
ACDelco	22291M
Beck/Arnley	142-5198
Beck/Arnley	142-5829
Beck/Arnley	142-6080
Beck/Arnley	142-5814
CARQUEST	21174
CARQUEST	21591
CARQUEST	22072
Chrysler	MB356010
Duralast	C71292
Freshstart	226
Gates	21591
Gates	22072
Gates	21174
General Motors	1378783
Goodyear	61068
Honda	19501-PY3-000
Honda	19501-PY3-A00
Mitsubishi	MD356871
Mitsubishi	MB356871
Mitsubishi	MD356870
Mitsubishi	MB356870
Mitsubishi	MB007648
Mitsubishi	MB008024
Mitsubishi	MB845903
Mopar	H0061068
Motorcraft	KM1248
Motorcraft	KM1077
NAPA	7880
NAPA	8310
NAPA	8753
Pirelli	41068
Saab	12787608
Saab	12799139
Suzuki	17851-66D00
Suzuki	17851-66D10
Toyota	16572-38080
Volvo Cars	3514517
Volvo Cars	3514629
Volvo Cars	3536130

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: Radiator Coolant HoseBrand: GatesPart#: 21033

1983 Toyota Pickup Radiator Coolant Hose ZO 21033

Gates Radiator Coolant Hose 21033 - Lower

Position: Lower

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 21.2
Inside Diameter 1 : 1.25
Inside Diameter 2 : 1.4
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1983 Toyota Pickup Engines.
Engine Sub Model Notes Fit Notes Position
2.2L L4 DLX, SR5 Molded Coolant Hose Fuel Type: DIESEL Lower
2.4L L4 Base, DLX, SR5 Cut to fit - Molded Coolant Hose Fuel Type: GAS - Drive Type: RWD Lower
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.2L L4	DLX, SR5	Molded Coolant Hose	Fuel Type: DIESEL	Lower
2.4L L4	Base, DLX, SR5	Cut to fit - Molded Coolant Hose	Fuel Type: GAS - Drive Type: RWD	Lower

Part Name: Radiator Coolant HoseBrand: GatesPart#: 21067

1983 Toyota Pickup Radiator Coolant Hose ZO 21067

Gates Radiator Coolant Hose 21067 - Upper

Position: Upper

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 13.2
Inside Diameter 1 : 1.25
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1983 Toyota Pickup Engines.
Engine Sub Model Notes Fit Notes Position
2.4L L4 Base, DLX, SR5 Cut to fit - Molded Coolant Hose Fuel Type: GAS Upper
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.4L L4	Base, DLX, SR5	Cut to fit - Molded Coolant Hose	Fuel Type: GAS	Upper

Part Name: Radiator Coolant HoseBrand: GatesPart#: 21171

1983 Toyota Pickup Radiator Coolant Hose ZO 21171

Gates Radiator Coolant Hose 21171 - Lower - Pipe To Radiator

Position: Lower - Pipe To Radiator

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 14
Inside Diameter 1 : 1.25
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1983 Toyota Pickup Engines.
Engine Sub Model Notes Fit Notes Position
2.4L L4 Base, DLX, SR5 Cut to fit - Molded Coolant Hose Fuel Type: GAS - Drive Type: 4WD Lower - Pipe To Radiator
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.4L L4	Base, DLX, SR5	Cut to fit - Molded Coolant Hose	Fuel Type: GAS - Drive Type: 4WD	Lower - Pipe To Radiator

Part Name: Radiator Coolant HoseBrand: GatesPart#: 25307

1983 Toyota Pickup Radiator Coolant Hose ZO 25307

Gates Radiator Coolant Hose 25307 - Lower

Position: Lower

Description:

Flexible Coolant Hose Standard

Part Specifications:

Centerline Length : 23
Inside Diameter 1 : 1.25
Inside Diameter 2 : 1.5

Features:

Gates Vulco-Flex(R) II hose will bend in almost any direction. It easily replicates the angles and planes of a wide variety of expensive original equipment coolant hose, for quick, easy replacement.
- Improved sealing surface for greater leak resistance and increased flexibility for easier installation.
- Heat and ozone resistant cover.
- Rated for SAE 20R5 Class D-2 performance.
- High temperature rating up to +257 Deg. F (+125 Deg. C).
Note: Gates recommends replacing clamps each time a new coolant hose is installed.
Caution: Do not use for fuel or oil transfer applications.
Gates Powering Progess

Condition: New

Fitments
This Part Fits Following 1983 Toyota Pickup Engines.
Engine Sub Model Notes Fit Notes Position
2.2L L4 DLX, SR5 Flexible Coolant Hose (Standard) Fuel Type: DIESEL Lower
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

ACDelco	20075S
Atlas	MC149
BMW	1.309.606.2
BMW	11 53 1 306 6882
BMW	1.309.688.2
Beck/Arnley	142-5980
CARQUEST	20801
Duralast	B71383
Freshstart	361
Gates	20801
Goodyear	61422
NAPA	7564
Toyota	16573-38020

My Vehicle:

1983 Toyota Pickup Radiator Coolant Hose

Dayco Radiator Coolant Hose 71383 - Lower - Pipe To Water Pump

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 20801 - Lower - Engine To Pipe

Description:

Part Specifications:

Features:

Dayco Radiator Coolant Hose 81021 - Lower - Pipe To Radiator, Upper

Description:

Features:

Dayco Radiator Coolant Hose 81091 - Lower

Description:

Features:

Gates Radiator Coolant Hose 25252 - Upper

Description:

Part Specifications:

Features:

Dayco Radiator Coolant Hose 81031 - Upper, Upper - Pipe To Radiator, Upper - Water Pump To Pipe

Description:

Features:

Gates Radiator Coolant Hose 25250 - Lower - Pipe To Radiator, Upper

Description:

Part Specifications:

Features:

Dayco Radiator Coolant Hose 70846 - Upper, Upper - Pipe To Radiator, Upper - Water Pump To Pipe

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 25305 - Lower

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 20774 - Upper

Description:

Part Specifications:

Features:

Dayco Radiator Coolant Hose 70842 - Lower

Description:

Part Specifications:

Features:

Dayco Radiator Coolant Hose 71292 - Lower - Pipe To Radiator

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 21033 - Lower

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 21067 - Upper

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 21171 - Lower - Pipe To Radiator

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 25307 - Lower

Description:

Part Specifications:

Features:

Related Belts and Cooling Parts

What Is MAP Price?

What Is MAP Price?

Core Return Process

Parts list X

Part added to your Kart X

Find exact fit part for your car. X