Home

2006 Toyota Camry

My Vehicle:

2006 Toyota Camry Engine Coolant Bypass Hose

We have found 5 Engine Coolant Bypass Hose for

2006 Toyota Camry

Part Name: Engine Coolant Bypass HoseBrand: GatesPart#: 18376

Gates Engine Coolant Bypass Hose 18376

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 12.7
Inside Diameter 1 : .32
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2006 Toyota Camry Engines.
Engine Sub Model Notes Fit Notes
2.4L L4 Base, LE, SE, XLE Molded Heater Hose Fuel Type: GAS
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes
2.4L L4	Base, LE, SE, XLE	Molded Heater Hose	Fuel Type: GAS

Part Name: Engine Coolant Bypass HoseBrand: GatesPart#: 18375

2006 Toyota Camry Engine Coolant Bypass Hose ZO 18375

Gates Engine Coolant Bypass Hose 18375 - Pipe To Throttle Body

Position: Pipe To Throttle Body

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 13.9
Inside Diameter 1 : .32
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2006 Toyota Camry Engines.
Engine Sub Model Notes Fit Notes Position
2.4L L4 Base, LE, SE, XLE Molded Heater Hose Fuel Type: GAS Pipe To Throttle Body
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.4L L4	Base, LE, SE, XLE	Molded Heater Hose	Fuel Type: GAS	Pipe To Throttle Body

Part Name: Engine Coolant Bypass HoseBrand: DaycoPart#: 86831

2006 Toyota Camry Engine Coolant Bypass Hose DY 86831

Dayco Engine Coolant Bypass Hose 86831

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 7
End 1 Inside Diameter : 5/16
End 1 Outside Diameter : 5/8
End 2 Inside Diameter : 5/16
End 2 Outside Diameter : 5/8
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 2006 Toyota Camry Engines.
Engine Sub Model Notes
2.4L L4 Base, LE, SE, XLE Small I.D. Heater Hose
Part Interchange
ACDelco 14661S
ACDelco 14030S
CARQUEST 18222
CARQUEST 18376
Duralast B86831
Gates 18222
Gates 18376
NAPA 10376
NAPA 10222
Toyota 16261-28050
Toyota 16261-0H010
Toyota 16264-35030
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes
2.4L L4	Base, LE, SE, XLE	Small I.D. Heater Hose

Part Name: Engine Coolant Bypass HoseBrand: GatesPart#: 12148

2006 Toyota Camry Engine Coolant Bypass Hose ZO 12148

Gates Engine Coolant Bypass Hose 12148

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 9.46
Inside Diameter 1 : .95
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2006 Toyota Camry Engines.
Engine Sub Model Notes Fit Notes
3.0L V6 LE, XLE Molded Heater Hose Fuel Type: GAS
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes
3.0L V6	LE, XLE	Molded Heater Hose	Fuel Type: GAS

Part Name: Engine Coolant Bypass HoseBrand: GatesPart#: 28413

2006 Toyota Camry Engine Coolant Bypass Hose ZO 28413

Gates Engine Coolant Bypass Hose 28413

Description:

Straight Heater Hose Standard

Part Specifications:

Centerline Length : 50
Centerline Length : 15.24
Centerline Length : 600
Inside Diameter 1 : 1
Working Pressure : 45
Weight Per Length : 18.60 lbs./Carton

Features:

Premium hose constructed for long service life.
- Unaffected by most coolants and non-oil based coolant additives and by high cooling system pressures
- Good resistance to high temperatures for extended periods of time
- Similar to SAE 20R3 Class D-2
- Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 2006 Toyota Camry Engines.
Engine Sub Model Notes Fit Notes
3.3L V6 SE Cut to Length, 10"; Protective sleeve required - Straight Heater Hose (Standard) Fuel Type: GAS
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

ACDelco	14661S
ACDelco	14030S
CARQUEST	18222
CARQUEST	18376
Duralast	B86831
Gates	18222
Gates	18376
NAPA	10376
NAPA	10222
Toyota	16261-28050
Toyota	16261-0H010
Toyota	16264-35030

My Vehicle:

2006 Toyota Camry Engine Coolant Bypass Hose

Gates Engine Coolant Bypass Hose 18376

Description:

Part Specifications:

Features:

Gates Engine Coolant Bypass Hose 18375 - Pipe To Throttle Body

Description:

Part Specifications:

Features:

Dayco Engine Coolant Bypass Hose 86831

Description:

Part Specifications:

Features:

Gates Engine Coolant Bypass Hose 12148

Description:

Part Specifications:

Features:

Gates Engine Coolant Bypass Hose 28413

Description:

Part Specifications:

Features:

Related Belts and Cooling Parts

What Is MAP Price?

What Is MAP Price?

Core Return Process

Parts list X

Part added to your Kart X

Find exact fit part for your car. X