2008 Saturn Vue HVAC Heater Hose

Part Name: HVAC Heater HoseBrand: GatesPart#: 18276

Gates HVAC Heater Hose 18276 - Reservoir To Pipe

Position: Reservoir To Pipe

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 12.31
Inside Diameter 1 : .28
Inside Diameter 2 : .37
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2008 Saturn Vue Engines.
Engine Sub Model Notes Fit Notes Position
2.4L L4 Green Line, XE Cut to fit - Molded Heater Hose Fuel Type: GAS Reservoir To Pipe
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.4L L4	Green Line, XE	Cut to fit - Molded Heater Hose	Fuel Type: GAS	Reservoir To Pipe

Part Name: HVAC Heater HoseBrand: GatesPart#: 19025

2008 Saturn Vue HVAC Heater Hose ZO 19025

Gates HVAC Heater Hose 19025 - Pipe-1 To Pipe-2

Position: Pipe-1 To Pipe-2

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 7.1
Inside Diameter 1 : .59
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2008 Saturn Vue Engines.
Engine Sub Model Notes Fit Notes Position
3.5L V6 XE Molded Heater Hose Fuel Type: GAS Pipe-1 To Pipe-2
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.5L V6	XE	Molded Heater Hose	Fuel Type: GAS	Pipe-1 To Pipe-2

Part Name: HVAC Heater HoseBrand: GatesPart#: 18010

2008 Saturn Vue HVAC Heater Hose ZO 18010

Gates HVAC Heater Hose 18010 - Pipe To Engine

Position: Pipe To Engine

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 9.6
Inside Diameter 1 : .25
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 2008 Saturn Vue Engines.
Engine Sub Model Notes Fit Notes Position
2.4L L4 Green Line, XE Cut to fit - Molded Heater Hose Fuel Type: ELECTRIC/GAS, GAS Pipe To Engine
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.4L L4	Green Line, XE	Cut to fit - Molded Heater Hose	Fuel Type: ELECTRIC/GAS, GAS	Pipe To Engine

Part Name: HVAC Heater HoseBrand: DaycoPart#: 71877

2008 Saturn Vue HVAC Heater Hose DY 71877

Dayco HVAC Heater Hose 71877 - Pipe-1 To Pipe-2

Position: Pipe-1 To Pipe-2

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 5
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Condition: New

Fitments
This Part Fits Following 2008 Saturn Vue Engines.
Engine Sub Model Notes Position
3.5L V6 XE Curved Radiator Hose Pipe-1 To Pipe-2

Engine	Sub Model	Notes	Position
3.5L V6	XE	Curved Radiator Hose	Pipe-1 To Pipe-2

Part Interchange

ACDelco	14314S
ACDelco	14155S
ACDelco	14099S
CARQUEST	18453
CARQUEST	18791
CARQUEST	19025
Duralast	A71877
Ford	F65E-8A582-AO
Ford	1L2Z-18472-BD
Freshstart	4622
Gates	19025
Gates	18791
Gates	18453
General Motors	10242185
General Motors	55565952
General Motors	12593464
General Motors	25862087
General Motors	15138450
General Motors	15832905
Goodyear	63981
Goodyear	63348
Motorcraft	KH101
NAPA	10453
NAPA	11025
NAPA	10791
Toyota	87245-35A50

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87603

2008 Saturn Vue HVAC Heater Hose DY 87603

Dayco HVAC Heater Hose 87603 - Tee To Pipe-1

Position: Tee To Pipe-1

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Dual I.D. Hose
Trunk Height : 7
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 3/4
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 2008 Saturn Vue Engines.
Engine Sub Model Notes Position
3.5L V6 XE Cut to Fit - Small I.D. Heater Hose Tee To Pipe-1

Engine	Sub Model	Notes	Position
3.5L V6	XE	Cut to Fit - Small I.D. Heater Hose	Tee To Pipe-1

Part Interchange

ACDelco	14004S
CARQUEST	18070
Datsun/Nissan	27144-01P00
Duralast	B87603
Ford	3W7Z-18472-BA
Ford	F8WZ-18472-BA
Gates	18070
General Motors	10284262
General Motors	10080350
General Motors	10145101
NAPA	10070
Saturn	19130282
V&W	303603

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 19614

2008 Saturn Vue HVAC Heater Hose ZO 19614

Gates HVAC Heater Hose 19614 - Thermostat To Reservoir

Position: Thermostat To Reservoir

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 20.4
Inside Diameter 1 : .75
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2008 Saturn Vue Engines.
Engine Sub Model Notes Fit Notes Position
3.6L V6 Red Line, XR Cut to fit - Molded Heater Hose Fuel Type: GAS Thermostat To Reservoir
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.6L V6	Red Line, XR	Cut to fit - Molded Heater Hose	Fuel Type: GAS	Thermostat To Reservoir

Part Name: HVAC Heater HoseBrand: GatesPart#: 18070

2008 Saturn Vue HVAC Heater Hose ZO 18070

Gates HVAC Heater Hose 18070 - Tee To Pipe-1

Position: Tee To Pipe-1

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 9.6
Inside Diameter 1 : .62
Inside Diameter 2 : .75
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2008 Saturn Vue Engines.
Engine Sub Model Notes Fit Notes Position
3.5L V6 XE Cut to fit - Molded Heater Hose Fuel Type: GAS Tee To Pipe-1
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.5L V6	XE	Cut to fit - Molded Heater Hose	Fuel Type: GAS	Tee To Pipe-1

Part Name: HVAC Heater HoseBrand: GatesPart#: 19736

2008 Saturn Vue HVAC Heater Hose ZO 19736

Gates HVAC Heater Hose 19736 - Heater To Tee

Position: Heater To Tee

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 7.5
Inside Diameter 1 : .72
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2008 Saturn Vue Engines.
Engine Sub Model Notes Fit Notes Position
3.5L V6 XE Molded Heater Hose Fuel Type: GAS Heater To Tee
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.5L V6	XE	Molded Heater Hose	Fuel Type: GAS	Heater To Tee

Part Name: HVAC Heater HoseBrand: GatesPart#: 19692

2008 Saturn Vue HVAC Heater Hose ZO 19692

Gates HVAC Heater Hose 19692 - Engine To Auxiliary Water Pump

Position: Engine To Auxiliary Water Pump

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 15.3
Inside Diameter 1 : .72
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2008 Saturn Vue Engines.
Engine Sub Model Notes Fit Notes Position
2.4L L4 Green Line, XE Molded Heater Hose Fuel Type: ELECTRIC/GAS Engine To Auxiliary Water Pump
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.4L L4	Green Line, XE	Molded Heater Hose	Fuel Type: ELECTRIC/GAS	Engine To Auxiliary Water Pump

Part Name: HVAC Heater HoseBrand: GatesPart#: 18129

2008 Saturn Vue HVAC Heater Hose ZO 18129

Gates HVAC Heater Hose 18129 - Reservoir To Pipe

Position: Reservoir To Pipe

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 32.9
Inside Diameter 1 : .25
Inside Diameter 2 : .31
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2008 Saturn Vue Engines.
Engine Sub Model Notes Fit Notes Position
2.4L L4 Green Line, XE Cut to fit - Molded Heater Hose Fuel Type: ELECTRIC/GAS Reservoir To Pipe
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.4L L4	Green Line, XE	Cut to fit - Molded Heater Hose	Fuel Type: ELECTRIC/GAS	Reservoir To Pipe

Part Name: HVAC Heater HoseBrand: GatesPart#: 19724

2008 Saturn Vue HVAC Heater Hose ZO 19724

Gates HVAC Heater Hose 19724 - Heater To Engine

Position: Heater To Engine

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 12.7
Inside Diameter 1 : .72
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2008 Saturn Vue Engines.
Engine Sub Model Notes Fit Notes Position
2.4L L4 Green Line, XE Molded Heater Hose Fuel Type: ELECTRIC/GAS Heater To Engine
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.4L L4	Green Line, XE	Molded Heater Hose	Fuel Type: ELECTRIC/GAS	Heater To Engine

Part Name: HVAC Heater HoseBrand: GatesPart#: 19537

2008 Saturn Vue HVAC Heater Hose ZO 19537

Gates HVAC Heater Hose 19537 - Heater To Thermostat

Position: Heater To Thermostat

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 18.6
Inside Diameter 1 : .62
Inside Diameter 2 : .75
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2008 Saturn Vue Engines.
Engine Sub Model Notes Fit Notes Position
3.6L V6 Red Line, XR Molded Heater Hose Fuel Type: GAS Heater To Thermostat
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.6L V6	Red Line, XR	Molded Heater Hose	Fuel Type: GAS	Heater To Thermostat

Part Name: HVAC Heater HoseBrand: GatesPart#: 19870

2008 Saturn Vue HVAC Heater Hose ZO 19870

Gates HVAC Heater Hose 19870 - Engine To Heater

Position: Engine To Heater

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 16.8
Inside Diameter 1 : .74
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2008 Saturn Vue Engines.
Engine Sub Model Notes Fit Notes Position
2.4L L4 Green Line, XE Molded Heater Hose Fuel Type: GAS Engine To Heater
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.4L L4	Green Line, XE	Molded Heater Hose	Fuel Type: GAS	Engine To Heater

Part Name: HVAC Heater HoseBrand: GatesPart#: 28409

2008 Saturn Vue HVAC Heater Hose ZO 28409

Gates HVAC Heater Hose 28409 - Pipe To Engine

Position: Pipe To Engine

Description:

Straight Heater Hose Standard

Part Specifications:

Centerline Length : 50
Centerline Length : 15.24
Centerline Length : 600
Inside Diameter 1 : .375
Working Pressure : 60
Weight Per Length : 8.25 lbs./Carton

Features:

Premium hose constructed for long service life.
- Unaffected by most coolants and non-oil based coolant additives and by high cooling system pressures
- Good resistance to high temperatures for extended periods of time
- Similar to SAE 20R3 Class D-2
- Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 2008 Saturn Vue Engines.
Engine Sub Model Notes Fit Notes Position
3.6L V6 Red Line, XR Cut to Length, 6" - Straight Heater Hose (Standard) Fuel Type: GAS Pipe To Engine
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.6L V6	Red Line, XR	Cut to Length, 6" - Straight Heater Hose (Standard)	Fuel Type: GAS	Pipe To Engine

Part Name: HVAC Heater HoseBrand: GatesPart#: 28411

2008 Saturn Vue HVAC Heater Hose ZO 28411

Gates HVAC Heater Hose 28411 - Pipe-4 To Pipe-5

Position: Pipe-4 To Pipe-5

Description:

Straight Heater Hose Standard

Part Specifications:

Centerline Length : 50
Centerline Length : 15.24
Centerline Length : 600
Inside Diameter 1 : .625
Working Pressure : 60
Weight Per Length : 11.70 lbs./Carton

Features:

Premium hose constructed for long service life.
- Unaffected by most coolants and non-oil based coolant additives and by high cooling system pressures
- Good resistance to high temperatures for extended periods of time
- Similar to SAE 20R3 Class D-2
- Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 2008 Saturn Vue Engines.
Engine Sub Model Notes Fit Notes Position
3.5L V6 XE Cut to Length, 3" - Straight Heater Hose (Standard) Fuel Type: GAS Pipe-4 To Pipe-5
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.5L V6	XE	Cut to Length, 3" - Straight Heater Hose (Standard)	Fuel Type: GAS	Pipe-4 To Pipe-5

Part Name: HVAC Heater HoseBrand: GatesPart#: 28412

2008 Saturn Vue HVAC Heater Hose ZO 28412

Gates HVAC Heater Hose 28412 - Heat Exchanger To Water Pump, Auxiliary Water Pump To Inverter, Heater To Thermostat, Thermostat To Reservoir, Tee To Reservoir, Thermostat To Heater

Position: Heat Exchanger To Water Pump, Auxiliary Water Pump To Inverter, Heater To Thermostat, Thermostat To Reservoir, Tee To Reservoir, Thermostat To Heater

Description:

Straight Heater Hose Standard

Part Specifications:

Centerline Length : 50
Centerline Length : 15.24
Centerline Length : 600
Inside Diameter 1 : .75
Working Pressure : 50
Weight Per Length : 13.20 lbs./Carton

Features:

Premium hose constructed for long service life.
- Unaffected by most coolants and non-oil based coolant additives and by high cooling system pressures
- Good resistance to high temperatures for extended periods of time
- Similar to SAE 20R3 Class D-2
- Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments

This Part Fits Following 2008 Saturn Vue Engines.

Engine	Sub Model	Notes	Fit Notes	Position
2.4L L4	Green Line, XE	Cut to Length, 18" - Straight Heater Hose (Standard)	Fuel Type: ELECTRIC/GAS, GAS	Heat Exchanger To Water Pump, Auxiliary Water Pump To Inverter, Heater To Thermostat, Thermostat To Reservoir
3.5L V6	XE	Cut to Length, 13" - Straight Heater Hose (Standard)	Fuel Type: GAS	Tee To Reservoir
3.6L V6	Red Line, XR	Cut to Length, 20" - Straight Heater Hose (Standard)	Fuel Type: GAS	Thermostat To Heater

Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

My Vehicle:

2008 Saturn Vue HVAC Heater Hose

Gates HVAC Heater Hose 18276 - Reservoir To Pipe

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19025 - Pipe-1 To Pipe-2

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18010 - Pipe To Engine

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 71877 - Pipe-1 To Pipe-2

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87603 - Tee To Pipe-1

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19614 - Thermostat To Reservoir

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18070 - Tee To Pipe-1

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19736 - Heater To Tee

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19692 - Engine To Auxiliary Water Pump

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18129 - Reservoir To Pipe

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19724 - Heater To Engine

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19537 - Heater To Thermostat

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19870 - Engine To Heater

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28409 - Pipe To Engine

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28411 - Pipe-4 To Pipe-5

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28412 - Heat Exchanger To Water Pump, Auxiliary Water Pump To Inverter, Heater To Thermostat, Thermostat To Reservoir, Tee To Reservoir, Thermostat To Heater

Description:

Part Specifications:

Features:

Related HVAC Parts

What Is MAP Price?

What Is MAP Price?

Core Return Process

Parts list X

Part added to your Kart X

Find exact fit part for your car. X