1999 Plymouth Voyager Radiator Coolant Hose

Part Name: Radiator Coolant HoseBrand: DaycoPart#: 71859

Dayco Radiator Coolant Hose 71859 - Lower

Position: Lower

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Dual I.D. Hose
Trunk Height : 14
End 1 Inside Diameter : 1 3/8
End 2 Inside Diameter : 1 1/2
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Condition: New

Fitments
This Part Fits Following 1999 Plymouth Voyager Engines.
Engine Sub Model Notes Position
2.4L L4 Base Curved Radiator Hose Lower
Part Interchange
ACDelco 22319M
CARQUEST 22224
Chrysler 4682396
Duralast B71859
Freshstart 1093
Gates 22224
Goodyear 62145
Motorcraft KM2913
NAPA 8866
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
2.4L L4	Base	Curved Radiator Hose	Lower

Part Name: Radiator Coolant HoseBrand: GatesPart#: 22224

1999 Plymouth Voyager Radiator Coolant Hose ZO 22224

Gates Radiator Coolant Hose 22224 - Lower

Position: Lower

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 21.6
Inside Diameter 1 : 1.34
Inside Diameter 2 : 1.5
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1999 Plymouth Voyager Engines.
Engine Sub Model Notes Fit Notes Position
2.4L L4 Base Molded Coolant Hose Fuel Type: GAS Lower
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.4L L4	Base	Molded Coolant Hose	Fuel Type: GAS	Lower

Part Name: Radiator Coolant HoseBrand: DaycoPart#: 71862

1999 Plymouth Voyager Radiator Coolant Hose DY 71862

Dayco Radiator Coolant Hose 71862 - Upper

Position: Upper

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Dual I.D. Hose
Trunk Height : 14 1/2
End 1 Inside Diameter : 1 1/4
End 2 Inside Diameter : 1 1/2
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Condition: New

Fitments
This Part Fits Following 1999 Plymouth Voyager Engines.
Engine Sub Model Notes Position
3.3L V6 Base, Expresso, SE Curved Radiator Hose Upper
3.8L V6 Base, Expresso, SE Curved Radiator Hose Upper
Part Interchange
ACDelco 22320M
CARQUEST 22227
Chrysler 4682394
Chrysler 4932864
Chrysler 04932864
Chrysler 04682394
Duralast D71862
Freshstart 1091
Gates 22227
Goodyear 62143
MasterPro 22227
NAPA 8869
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
3.3L V6	Base, Expresso, SE	Curved Radiator Hose	Upper
3.8L V6	Base, Expresso, SE	Curved Radiator Hose	Upper

Part Name: Radiator Coolant HoseBrand: DaycoPart#: 71860

1999 Plymouth Voyager Radiator Coolant Hose DY 71860

Dayco Radiator Coolant Hose 71860 - Upper

Position: Upper

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Dual I.D. Hose
Trunk Height : 15
End 1 Inside Diameter : 1 1/4
End 2 Inside Diameter : 1 3/8
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Condition: New

Fitments
This Part Fits Following 1999 Plymouth Voyager Engines.
Engine Sub Model Notes Position
3.0L V6 Base Curved Radiator Hose Upper
Part Interchange
ACDelco 24338L
CARQUEST 22212
Chrysler 4682332C
Chrysler 4682332
Chrysler 04682332
Duralast D71860
Freshstart 256
Gates 22212
Goodyear 62449
Goodyear 61184
Hyundai 25411-1R250
NAPA 8854
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
3.0L V6	Base	Curved Radiator Hose	Upper

Part Name: Radiator Coolant HoseBrand: GatesPart#: 22227

1999 Plymouth Voyager Radiator Coolant Hose ZO 22227

Gates Radiator Coolant Hose 22227 - Upper

Position: Upper

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 15.2
Inside Diameter 1 : 1.25
Inside Diameter 2 : 1.5
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1999 Plymouth Voyager Engines.
Engine Sub Model Notes Fit Notes Position
3.3L V6 Base, Expresso, SE Molded Coolant Hose Fuel Type: FLEX, GAS Upper
3.8L V6 Base, Expresso, SE Molded Coolant Hose Fuel Type: GAS Upper
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.3L V6	Base, Expresso, SE	Molded Coolant Hose	Fuel Type: FLEX, GAS	Upper
3.8L V6	Base, Expresso, SE	Molded Coolant Hose	Fuel Type: GAS	Upper

Part Name: Radiator Coolant HoseBrand: GatesPart#: 22212

1999 Plymouth Voyager Radiator Coolant Hose ZO 22212

Gates Radiator Coolant Hose 22212 - Upper

Position: Upper

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 14.3
Inside Diameter 1 : 1.25
Inside Diameter 2 : 1.34
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1999 Plymouth Voyager Engines.
Engine Sub Model Notes Fit Notes Position
3.0L V6 Base Molded Coolant Hose Fuel Type: GAS Upper
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.0L V6	Base	Molded Coolant Hose	Fuel Type: GAS	Upper

Part Name: Radiator Coolant HoseBrand: DaycoPart#: 71863

1999 Plymouth Voyager Radiator Coolant Hose DY 71863

Dayco Radiator Coolant Hose 71863 - Lower

Position: Lower

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 9
End 1 Inside Diameter : 1 1/2
End 2 Inside Diameter : 1 1/2
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Condition: New

Fitments
This Part Fits Following 1999 Plymouth Voyager Engines.
Engine Sub Model Notes Position
3.3L V6 Base, Expresso, SE Std. Rad. - Curved Radiator Hose Lower
3.8L V6 Base, Expresso, SE Std. Rad. - Curved Radiator Hose Lower
Part Interchange
ACDelco 20292S
CARQUEST 22222
Chrysler 4682316
Chrysler 04682316
Duralast B71863
Freshstart 1064
Gates 22222
Goodyear 62116
MasterPro 22222
NAPA 8864
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
3.3L V6	Base, Expresso, SE	Std. Rad. - Curved Radiator Hose	Lower
3.8L V6	Base, Expresso, SE	Std. Rad. - Curved Radiator Hose	Lower

Part Name: Radiator Coolant HoseBrand: DaycoPart#: 71858

1999 Plymouth Voyager Radiator Coolant Hose DY 71858

Dayco Radiator Coolant Hose 71858 - Upper

Position: Upper

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 12 1/4
End 1 Inside Diameter : 1 1/4
End 2 Inside Diameter : 1 1/4
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Condition: New

Fitments
This Part Fits Following 1999 Plymouth Voyager Engines.
Engine Sub Model Notes Position
2.4L L4 Base Curved Radiator Hose Upper
Part Interchange
ACDelco 20293S
CARQUEST 22223
Chrysler 4682363
Duralast C71858
Gates 22223
NAPA 8865
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
2.4L L4	Base	Curved Radiator Hose	Upper

Part Name: Radiator Coolant HoseBrand: GatesPart#: 22222

1999 Plymouth Voyager Radiator Coolant Hose ZO 22222

Gates Radiator Coolant Hose 22222 - Lower

Position: Lower

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 14.1
Inside Diameter 1 : 1.5
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments

This Part Fits Following 1999 Plymouth Voyager Engines.

Engine	Sub Model	Notes	Fit Notes	Position
3.3L V6	Base, Expresso, SE	W/O H.D. Cool. - Molded Coolant Hose	Fuel Type: FLEX, GAS	Lower
3.8L V6	Base, Expresso, SE	W/O H.D. Cool. - Molded Coolant Hose	Fuel Type: GAS	Lower

Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: Radiator Coolant HoseBrand: GatesPart#: 22223

1999 Plymouth Voyager Radiator Coolant Hose ZO 22223

Gates Radiator Coolant Hose 22223 - Upper

Position: Upper

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 15
Inside Diameter 1 : 1.27
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1999 Plymouth Voyager Engines.
Engine Sub Model Notes Fit Notes Position
2.4L L4 Base Molded Coolant Hose Fuel Type: GAS Upper
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.4L L4	Base	Molded Coolant Hose	Fuel Type: GAS	Upper

Part Name: Radiator Coolant HoseBrand: GatesPart#: 22226

1999 Plymouth Voyager Radiator Coolant Hose ZO 22226

Gates Radiator Coolant Hose 22226 - Lower

Position: Lower

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 40.1
Inside Diameter 1 : 1.5
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1999 Plymouth Voyager Engines.
Engine Sub Model Notes Fit Notes Position
3.3L V6 Base, Expresso, SE W/H.D. Cool. - Molded Coolant Hose Fuel Type: FLEX, GAS Lower
3.8L V6 Base, Expresso, SE W/H.D. Cool. - Molded Coolant Hose Fuel Type: GAS Lower
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.3L V6	Base, Expresso, SE	W/H.D. Cool. - Molded Coolant Hose	Fuel Type: FLEX, GAS	Lower
3.8L V6	Base, Expresso, SE	W/H.D. Cool. - Molded Coolant Hose	Fuel Type: GAS	Lower

Part Name: Radiator Coolant HoseBrand: DaycoPart#: 71861

1999 Plymouth Voyager Radiator Coolant Hose DY 71861

Dayco Radiator Coolant Hose 71861 - Lower

Position: Lower

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Dual I.D. Hose
Trunk Height : 27
End 1 Inside Diameter : 1 3/8
End 2 Inside Diameter : 1 1/2
Contains Protective Sleeve : Y
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Condition: New

Fitments
This Part Fits Following 1999 Plymouth Voyager Engines.
Engine Sub Model Notes Position
3.0L V6 Base w/o H.D. Rad. - Curved Radiator Hose Lower
Part Interchange
ACDelco 26310X
CARQUEST 22225
Chrysler 4682354D
Chrysler 04682354
Chrysler 4682354
Duralast E71861
Freshstart 1092
Gates 22225
Goodyear 62144
NAPA 8867
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
3.0L V6	Base	w/o H.D. Rad. - Curved Radiator Hose	Lower

Part Name: Radiator Coolant HoseBrand: DaycoPart#: 72017

1999 Plymouth Voyager Radiator Coolant Hose DY 72017

Dayco Radiator Coolant Hose 72017 - Lower

Position: Lower

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 31 1/2
End 1 Inside Diameter : 1 1/2
End 2 Inside Diameter : 1 1/2
Contains Protective Sleeve : Y
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Condition: New

Fitments
This Part Fits Following 1999 Plymouth Voyager Engines.
Engine Sub Model Notes Position
3.3L V6 Base, Expresso, SE H.D. Rad. - Curved Radiator Hose Lower
3.8L V6 Base, Expresso, SE H.D. Rad. - Curved Radiator Hose Lower
Part Interchange
ACDelco 26311X
CARQUEST 22226
Chrysler 04682398
Chrysler 4682398
Duralast E72017
Freshstart 62230
Freshstart 1184
Gates 22226
Goodyear 62230
NAPA 8868
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
3.3L V6	Base, Expresso, SE	H.D. Rad. - Curved Radiator Hose	Lower
3.8L V6	Base, Expresso, SE	H.D. Rad. - Curved Radiator Hose	Lower

Part Name: Radiator Coolant HoseBrand: GatesPart#: 22225

1999 Plymouth Voyager Radiator Coolant Hose ZO 22225

Gates Radiator Coolant Hose 22225 - Lower

Position: Lower

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 41.4
Inside Diameter 1 : 1.34
Inside Diameter 2 : 1.5
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1999 Plymouth Voyager Engines.
Engine Sub Model Notes Fit Notes Position
3.0L V6 Base W/Std. Cool. - Molded Coolant Hose Fuel Type: GAS Lower
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.0L V6	Base	W/Std. Cool. - Molded Coolant Hose	Fuel Type: GAS	Lower

Part Name: Radiator Coolant HoseBrand: GatesPart#: 23113

1999 Plymouth Voyager Radiator Coolant Hose ZO 23113

Gates Radiator Coolant Hose 23113 - Lower

Position: Lower

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 21.4
Inside Diameter 1 : 1.31
Inside Diameter 2 : 1.50
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1999 Plymouth Voyager Engines.
Engine Sub Model Notes Fit Notes Position
3.0L V6 Base W/H.D. Cool. - Molded Coolant Hose Fuel Type: GAS Lower
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

ACDelco	22319M
CARQUEST	22224
Chrysler	4682396
Duralast	B71859
Freshstart	1093
Gates	22224
Goodyear	62145
Motorcraft	KM2913
NAPA	8866

ACDelco	22320M
CARQUEST	22227
Chrysler	4682394
Chrysler	4932864
Chrysler	04932864
Chrysler	04682394
Duralast	D71862
Freshstart	1091
Gates	22227
Goodyear	62143
MasterPro	22227
NAPA	8869

ACDelco	24338L
CARQUEST	22212
Chrysler	4682332C
Chrysler	4682332
Chrysler	04682332
Duralast	D71860
Freshstart	256
Gates	22212
Goodyear	62449
Goodyear	61184
Hyundai	25411-1R250
NAPA	8854

ACDelco	20292S
CARQUEST	22222
Chrysler	4682316
Chrysler	04682316
Duralast	B71863
Freshstart	1064
Gates	22222
Goodyear	62116
MasterPro	22222
NAPA	8864

ACDelco	20293S
CARQUEST	22223
Chrysler	4682363
Duralast	C71858
Gates	22223
NAPA	8865

ACDelco	26310X
CARQUEST	22225
Chrysler	4682354D
Chrysler	04682354
Chrysler	4682354
Duralast	E71861
Freshstart	1092
Gates	22225
Goodyear	62144
NAPA	8867

ACDelco	26311X
CARQUEST	22226
Chrysler	04682398
Chrysler	4682398
Duralast	E72017
Freshstart	62230
Freshstart	1184
Gates	22226
Goodyear	62230
NAPA	8868

My Vehicle:

1999 Plymouth Voyager Radiator Coolant Hose

Dayco Radiator Coolant Hose 71859 - Lower

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 22224 - Lower

Description:

Part Specifications:

Features:

Dayco Radiator Coolant Hose 71862 - Upper

Description:

Part Specifications:

Features:

Dayco Radiator Coolant Hose 71860 - Upper

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 22227 - Upper

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 22212 - Upper

Description:

Part Specifications:

Features:

Dayco Radiator Coolant Hose 71863 - Lower

Description:

Part Specifications:

Features:

Dayco Radiator Coolant Hose 71858 - Upper

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 22222 - Lower

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 22223 - Upper

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 22226 - Lower

Description:

Part Specifications:

Features:

Dayco Radiator Coolant Hose 71861 - Lower

Description:

Part Specifications:

Features:

Dayco Radiator Coolant Hose 72017 - Lower

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 22225 - Lower

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 23113 - Lower

Description:

Part Specifications:

Features:

Related Belts and Cooling Parts

What Is MAP Price?

What Is MAP Price?

Core Return Process

Parts list X

Part added to your Kart X

Find exact fit part for your car. X