Home

2006 Nissan Xterra

My Vehicle:

2006 Nissan Xterra HVAC Heater Hose

We have found 3 HVAC Heater Hose for

2006 Nissan Xterra

Part Name: HVAC Heater HoseBrand: GatesPart#: 19878

Gates HVAC Heater Hose 19878 - Heater Inlet

Position: Heater Inlet

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 11.4
Inside Diameter 1 : .75
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2006 Nissan Xterra Engines.
Engine Sub Model Notes Fit Notes Position
4.0L V6 Off-Road, S, SE, X Molded Heater Hose Fuel Type: GAS Heater Inlet
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
4.0L V6	Off-Road, S, SE, X	Molded Heater Hose	Fuel Type: GAS	Heater Inlet

Part Name: HVAC Heater HoseBrand: DaycoPart#: 86109

2006 Nissan Xterra HVAC Heater Hose DY 86109

Dayco HVAC Heater Hose 86109 - Tee To Pipe

Position: Tee To Pipe

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 11
End 1 Inside Diameter : 23/32
End 2 Inside Diameter : 23/32
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 2006 Nissan Xterra Engines.
Engine Sub Model Notes Position
4.0L V6 Off-Road, S, SE, X Small I.D. Heater Hose Tee To Pipe

Engine	Sub Model	Notes	Position
4.0L V6	Off-Road, S, SE, X	Small I.D. Heater Hose	Tee To Pipe

Part Interchange

ACDelco	16219M
ACDelco	14516S
ACDelco	14480S
CARQUEST	19733
Datsun/Nissan	92400-EA200
Duralast	D86109
Gates	19878
Gates	19733
Gates	19850
General Motors	25679318
General Motors	3528978
General Motors	3543620
General Motors	3544757
General Motors	15776163
General Motors	22685157
General Motors	22682498
General Motors	15776161
NAPA	11850
NAPA	11878
NAPA	11733
Saturn	22615850

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 19879

2006 Nissan Xterra HVAC Heater Hose ZO 19879

Gates HVAC Heater Hose 19879 - Heater Outlet

Position: Heater Outlet

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 13.8
Inside Diameter 1 : .75
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2006 Nissan Xterra Engines.
Engine Sub Model Notes Fit Notes Position
4.0L V6 Off-Road, S, SE, X Molded Heater Hose Fuel Type: GAS Heater Outlet
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

My Vehicle:

2006 Nissan Xterra HVAC Heater Hose

Gates HVAC Heater Hose 19878 - Heater Inlet

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 86109 - Tee To Pipe

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19879 - Heater Outlet

Description:

Part Specifications:

Features:

Related HVAC Parts

What Is MAP Price?

What Is MAP Price?

Core Return Process

Parts list X

Part added to your Kart X

Find exact fit part for your car. X