2003 Nissan Frontier Radiator Coolant Hose

Part Name: Radiator Coolant HoseBrand: GatesPart#: 22416

Gates Radiator Coolant Hose 22416 - Lower - Radiator To Pipe

Position: Lower - Radiator To Pipe

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 19.8
Inside Diameter 1 : 1.33
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2003 Nissan Frontier Engines.
Engine Sub Model Notes Fit Notes Position
2.4L L4 Base, XE Molded Coolant Hose Fuel Type: GAS Lower - Radiator To Pipe
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.4L L4	Base, XE	Molded Coolant Hose	Fuel Type: GAS	Lower - Radiator To Pipe

Part Name: Radiator Coolant HoseBrand: DaycoPart#: 71516

2003 Nissan Frontier Radiator Coolant Hose DY 71516

Dayco Radiator Coolant Hose 71516 - Lower - Pipe To Radiator

Position: Lower - Pipe To Radiator

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Dual I.D. Hose
Trunk Height : 13
End 1 Inside Diameter : 1 5/16
End 2 Inside Diameter : 1 1/2
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Condition: New

Fitments
This Part Fits Following 2003 Nissan Frontier Engines.
Engine Sub Model Notes Position
3.3L V6 SC, SE, SVE, XE Curved Radiator Hose Lower - Pipe To Radiator
Part Interchange
ACDelco 24421L
ACDelco 24411M
CARQUEST 22478
CARQUEST 22612
Datsun/Nissan 21503-4S100
Duralast C71516
Ford F1SE-8B274-AE
Ford F1SZ-8260-A
Freshstart 982
Gates 22478
Gates 22612
Goodyear 62030
Goodyear 62516
NAPA 9111
NAPA 9245
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
3.3L V6	SC, SE, SVE, XE	Curved Radiator Hose	Lower - Pipe To Radiator

Part Name: Radiator Coolant HoseBrand: DaycoPart#: 71490

2003 Nissan Frontier Radiator Coolant Hose DY 71490

Dayco Radiator Coolant Hose 71490 - Upper

Position: Upper

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 14
End 1 Inside Diameter : 1 5/16
End 2 Inside Diameter : 1 5/16
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Condition: New

Fitments
This Part Fits Following 2003 Nissan Frontier Engines.
Engine Sub Model Notes Position
2.4L L4 Base, XE Curved Radiator Hose Upper

Engine	Sub Model	Notes	Position
2.4L L4	Base, XE	Curved Radiator Hose	Upper

Part Interchange

ACDelco	22313M
CARQUEST	22185
Datsun/Nissan	21501-3B010
Datsun/Nissan	21501-86G10
Datsun/Nissan	21503-3S500
Datsun/Nissan	21501-3B015
Datsun/Nissan	21501-86G00
Datsun/Nissan	21501-3S500
Datsun/Nissan	21501-3S501
Duralast	C71490
Gates	22185
Goodyear	62455
MasterPro	22185
NAPA	8845

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: Radiator Coolant HoseBrand: GatesPart#: 22478

2003 Nissan Frontier Radiator Coolant Hose ZO 22478

Gates Radiator Coolant Hose 22478 - Lower - Radiator To Pipe

Position: Lower - Radiator To Pipe

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 20
Inside Diameter 1 : 1.34
Inside Diameter 2 : 1.55
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2003 Nissan Frontier Engines.
Engine Sub Model Notes Fit Notes Position
3.3L V6 SC, SE, SVE, XE Molded Coolant Hose Fuel Type: GAS Lower - Radiator To Pipe
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.3L V6	SC, SE, SVE, XE	Molded Coolant Hose	Fuel Type: GAS	Lower - Radiator To Pipe

Part Name: Radiator Coolant HoseBrand: DaycoPart#: 81031

2003 Nissan Frontier Radiator Coolant Hose DY 81031

Dayco Radiator Coolant Hose 81031 - Upper

Position: Upper

Description:

FLEX RADIATOR HOSE STANDARD DAYCO

Features:

Precision molded in standard lengths, Dayco’s Flex Radiator Hose is designed to replace straight or molded radiator hoses. The knitted reinforcement and synthetic EPDM construction meets SAE J20R4, Class D-2 requirements. This hose is designed to prevent splitting, ballooning, and elongation; and, resists ozone and other detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). The corrugations provide excellent hose flexibility without flattening or collapse. This Flex Radiator Hose is another Dayco® product proudly made in the USA. Note: This hose is NOT suitable for fuel or oil transfer.

Condition: New

Fitments
This Part Fits Following 2003 Nissan Frontier Engines.
Engine Sub Model Notes Position
3.3L V6 SC, SE, SVE, XE Flex Radiator Hose Upper

Engine	Sub Model	Notes	Position
3.3L V6	SC, SE, SVE, XE	Flex Radiator Hose	Upper

Part Interchange

ACDelco	31610
Atlas	535
AutoZone	C6404
Autopar	RH19
Bowes	1110
Chief	C6404
Conoco	FH24
Datsun/Nissan	21501-20601
Duralast	81031
Fiat	4227246
Ford	C9PZ-8260-F
Ford	72EB-8260AA
Ford	7HF-8260AB
Ford	C2RZ-8260-AB
Ford	B5AA-8286-A
Freshstart	1111
Frigiking	71-01203
Gates	26404
Goodyear	52011
Goodyear	52012
Gulf	5011
Mobil	5M11
Mopar	BH603
Motorcraft	KA110
NAPA	FM70
Navistar	635319-R1
Pirelli	512
Renault	5548391
Texaco	1111
Texaco	106
Thermo-King	1082A64H02
Toyota	99522-01066
Uniroyal	5011
V&W	1111

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: Radiator Coolant HoseBrand: GatesPart#: 22185

2003 Nissan Frontier Radiator Coolant Hose ZO 22185

Gates Radiator Coolant Hose 22185 - Upper

Position: Upper

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 17.7
Inside Diameter 1 : 1.34
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2003 Nissan Frontier Engines.
Engine Sub Model Notes Fit Notes Position
2.4L L4 Base, XE Molded Coolant Hose Fuel Type: GAS Upper
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.4L L4	Base, XE	Molded Coolant Hose	Fuel Type: GAS	Upper

Part Name: Radiator Coolant HoseBrand: GatesPart#: 22516

2003 Nissan Frontier Radiator Coolant Hose ZO 22516

Gates Radiator Coolant Hose 22516 - Lower - Pipe To Thermostat

Position: Lower - Pipe To Thermostat

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 4.3
Inside Diameter 1 : 1.58
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2003 Nissan Frontier Engines.
Engine Sub Model Notes Fit Notes Position
3.3L V6 SC, SE, SVE, XE Molded Coolant Hose Fuel Type: GAS Lower - Pipe To Thermostat
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.3L V6	SC, SE, SVE, XE	Molded Coolant Hose	Fuel Type: GAS	Lower - Pipe To Thermostat

Part Name: Radiator Coolant HoseBrand: DaycoPart#: 70281

2003 Nissan Frontier Radiator Coolant Hose DY 70281

Dayco Radiator Coolant Hose 70281 - Lower - Pipe To Engine

Position: Lower - Pipe To Engine

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 9 3/4
End 1 Inside Diameter : 1 1/2
End 2 Inside Diameter : 1 1/2
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Condition: New

Fitments
This Part Fits Following 2003 Nissan Frontier Engines.
Engine Sub Model Notes Position
3.3L V6 SC, SE, SVE, XE Cut to Fit - Curved Radiator Hose Lower - Pipe To Engine

Engine	Sub Model	Notes	Position
3.3L V6	SC, SE, SVE, XE	Cut to Fit - Curved Radiator Hose	Lower - Pipe To Engine

Part Interchange

ACDelco	20120S
AMC	930068
CARQUEST	21145
Chief	C0876
Chrysler	1827644
Chrysler	1827643
Datsun/Nissan	14055-0W010
Duralast	B70281
Gates	21145
Gates	20876
General Motors	1336807
General Motors	3709443
General Motors	1336815
Goodyear	60289
Goodyear	62457
Hyster	136544
John Deere	P50477H
John Deere	M3107T
Mazda	0866-16-521A
Mazda	0866-15-521A
Mopar	BH822
Mopar	BH764
Mopar	BH1022
Motorcraft	KM152
NAPA	7851
Pirelli	H16
Pirelli	H135
Pirelli	MR548
Pirelli	MR594
Uniroyal	CH27
Uniroyal	CH86
Uniroyal	CH62
White	1437A7
Yale	1106501

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: Radiator Coolant HoseBrand: DaycoPart#: 71443

2003 Nissan Frontier Radiator Coolant Hose DY 71443

Dayco Radiator Coolant Hose 71443 - Upper

Position: Upper

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 13 1/4
End 1 Inside Diameter : 1 5/16
End 2 Inside Diameter : 1 5/16
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Condition: New

Fitments
This Part Fits Following 2003 Nissan Frontier Engines.
Engine Sub Model Notes Position
3.3L V6 SC, SE, SVE, XE Cut to Fit - Curved Radiator Hose Upper

Engine	Sub Model	Notes	Position
3.3L V6	SC, SE, SVE, XE	Cut to Fit - Curved Radiator Hose	Upper

Part Interchange

ACDelco	20332S
ACDelco	22506M
CARQUEST	22517
CARQUEST	22904
Datsun/Nissan	21501-0W501
Datsun/Nissan	21501-4S100
Duralast	C71443
Gates	22517
Gates	22904
Goodyear	62862
Goodyear	61669
Goodyear	62861
Mitsubishi	MB356994
Mitsubishi	MB356992
Mitsubishi	MB356964
NAPA	9150
NAPA	9539

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: Radiator Coolant HoseBrand: GatesPart#: 22517

2003 Nissan Frontier Radiator Coolant Hose ZO 22517

Gates Radiator Coolant Hose 22517 - Upper

Position: Upper

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 10.9
Inside Diameter 1 : 1.36
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2003 Nissan Frontier Engines.
Engine Sub Model Notes Fit Notes Position
3.3L V6 SC, SE, SVE, XE Molded Coolant Hose Fuel Type: GAS Upper
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.3L V6	SC, SE, SVE, XE	Molded Coolant Hose	Fuel Type: GAS	Upper

Part Name: Radiator Coolant HoseBrand: DaycoPart#: 71626

2003 Nissan Frontier Radiator Coolant Hose DY 71626

Dayco Radiator Coolant Hose 71626 - Lower - Pipe To Radiator

Position: Lower - Pipe To Radiator

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 14 1/2
End 1 Inside Diameter : 1 11/32
End 2 Inside Diameter : 1 11/32
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Condition: New

Fitments
This Part Fits Following 2003 Nissan Frontier Engines.
Engine Sub Model Notes Position
2.4L L4 Base, XE Cut to Fit - Curved Radiator Hose Lower - Pipe To Radiator

Engine	Sub Model	Notes	Position
2.4L L4	Base, XE	Cut to Fit - Curved Radiator Hose	Lower - Pipe To Radiator

Part Interchange

ACDelco	24257L
ACDelco	24394L
CARQUEST	21873
CARQUEST	22416
Datsun/Nissan	21505-S3801
Datsun/Nissan	21503-7B400
Datsun/Nissan	21505-S3800
Datsun/Nissan	21505-86G16
Datsun/Nissan	21503-86G01
Datsun/Nissan	21503-86G11
Datsun/Nissan	21503-86G16
Datsun/Nissan	21504-3S500
Datsun/Nissan	21505-86G06
Duralast	D71626
Gates	21873
Gates	22416
Goodyear	61293
Goodyear	62470
NAPA	8563
NAPA	9049

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: Radiator Coolant HoseBrand: GatesPart#: 24020

2003 Nissan Frontier Radiator Coolant Hose ZO 24020

Gates Radiator Coolant Hose 24020 - Lower - Pipe To Engine

Position: Lower - Pipe To Engine

Description:

Straight Coolant Hose Standard

Part Specifications:

Centerline Length : 3
Centerline Length : .91
Centerline Length : 36
Inside Diameter 1 : 1.25
Working Pressure : 65
Construction : 2-Ply

Features:

Specially engineered stick hose is ideal for straight coolant/air connections in automotive, stationary engine, industrial and home applications.
- Heat-resistant cover.
- Meets SAE 20R1 Standard Wall Class D-2 requirements.
- Cover marked in one-inch increments for easy measuring and cutting allows custom fit light-duty coolant installations.
- Temperature Rating: -40 Deg. F to 257 Deg. F (-40 Deg. C to 125 Deg. C).
Caution: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 2003 Nissan Frontier Engines.
Engine Sub Model Notes Fit Notes Position
2.4L L4 Base, XE Cut to Length, 2 3/4" - Straight Coolant Hose (Standard) Fuel Type: GAS Lower - Pipe To Engine
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

ACDelco	24421L
ACDelco	24411M
CARQUEST	22478
CARQUEST	22612
Datsun/Nissan	21503-4S100
Duralast	C71516
Ford	F1SE-8B274-AE
Ford	F1SZ-8260-A
Freshstart	982
Gates	22478
Gates	22612
Goodyear	62030
Goodyear	62516
NAPA	9111
NAPA	9245

My Vehicle:

2003 Nissan Frontier Radiator Coolant Hose

Gates Radiator Coolant Hose 22416 - Lower - Radiator To Pipe

Description:

Part Specifications:

Features:

Dayco Radiator Coolant Hose 71516 - Lower - Pipe To Radiator

Description:

Part Specifications:

Features:

Dayco Radiator Coolant Hose 71490 - Upper

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 22478 - Lower - Radiator To Pipe

Description:

Part Specifications:

Features:

Dayco Radiator Coolant Hose 81031 - Upper

Description:

Features:

Gates Radiator Coolant Hose 22185 - Upper

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 22516 - Lower - Pipe To Thermostat

Description:

Part Specifications:

Features:

Dayco Radiator Coolant Hose 70281 - Lower - Pipe To Engine

Description:

Part Specifications:

Features:

Dayco Radiator Coolant Hose 71443 - Upper

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 22517 - Upper

Description:

Part Specifications:

Features:

Dayco Radiator Coolant Hose 71626 - Lower - Pipe To Radiator

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 24020 - Lower - Pipe To Engine

Description:

Part Specifications:

Features:

Related Belts and Cooling Parts

What Is MAP Price?

What Is MAP Price?

Core Return Process

Parts list X

Part added to your Kart X

Find exact fit part for your car. X