1992 Nissan D21 Radiator Coolant Hose

Part Name: Radiator Coolant HoseBrand: DaycoPart#: 71354

Dayco Radiator Coolant Hose 71354 - Lower - Pipe To Radiator

Position: Lower - Pipe To Radiator

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Dual I.D. Hose
Trunk Height : 10
End 1 Inside Diameter : 1 3/8
End 2 Inside Diameter : 1 9/16
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Condition: New

Fitments
This Part Fits Following 1992 Nissan D21 Engines.
Engine Sub Model Notes Position
3.0L V6 Base, SE Curved Radiator Hose Lower - Pipe To Radiator
Part Interchange
ACDelco 20225S
CARQUEST 21734
Datsun/Nissan 21503-3B010
Datsun/Nissan 21503-09G10
Datsun/Nissan 21503-09G00
Duralast B71354
Gates 21734
NAPA 8425
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
3.0L V6	Base, SE	Curved Radiator Hose	Lower - Pipe To Radiator

Part Name: Radiator Coolant HoseBrand: GatesPart#: 21734

1992 Nissan D21 Radiator Coolant Hose ZO 21734

Gates Radiator Coolant Hose 21734 - Lower - Pipe To Radiator

Position: Lower - Pipe To Radiator

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 10.8
Inside Diameter 1 : 1.34
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1992 Nissan D21 Engines.
Engine Sub Model Notes Fit Notes Position
3.0L V6 Base, SE Molded Coolant Hose Fuel Type: GAS Lower - Pipe To Radiator
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.0L V6	Base, SE	Molded Coolant Hose	Fuel Type: GAS	Lower - Pipe To Radiator

Part Name: Radiator Coolant HoseBrand: DaycoPart#: 71490

1992 Nissan D21 Radiator Coolant Hose DY 71490

Dayco Radiator Coolant Hose 71490 - Upper

Position: Upper

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 14
End 1 Inside Diameter : 1 5/16
End 2 Inside Diameter : 1 5/16
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Condition: New

Fitments
This Part Fits Following 1992 Nissan D21 Engines.
Engine Sub Model Notes Position
2.4L L4 Base Curved Radiator Hose Upper

Engine	Sub Model	Notes	Position
2.4L L4	Base	Curved Radiator Hose	Upper

Part Interchange

ACDelco	22313M
CARQUEST	22185
Datsun/Nissan	21501-3B010
Datsun/Nissan	21501-86G10
Datsun/Nissan	21503-3S500
Datsun/Nissan	21501-3B015
Datsun/Nissan	21501-86G00
Datsun/Nissan	21501-3S500
Datsun/Nissan	21501-3S501
Duralast	C71490
Gates	22185
Goodyear	62455
MasterPro	22185
NAPA	8845

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: Radiator Coolant HoseBrand: GatesPart#: 20940

1992 Nissan D21 Radiator Coolant Hose ZO 20940

Gates Radiator Coolant Hose 20940 - Upper

Position: Upper

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 10
Inside Diameter 1 : 1.25
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1992 Nissan D21 Engines.
Engine Sub Model Notes Fit Notes Position
3.0L V6 Base, SE Molded Coolant Hose Fuel Type: GAS Upper
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.0L V6	Base, SE	Molded Coolant Hose	Fuel Type: GAS	Upper

Part Name: Radiator Coolant HoseBrand: DaycoPart#: 70927

1992 Nissan D21 Radiator Coolant Hose DY 70927

Dayco Radiator Coolant Hose 70927 - Upper

Position: Upper

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 10
End 1 Inside Diameter : 1 1/4
End 2 Inside Diameter : 1 1/4
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Condition: New

Fitments
This Part Fits Following 1992 Nissan D21 Engines.
Engine Sub Model Notes Position
3.0L V6 Base, SE Curved Radiator Hose Upper

Engine	Sub Model	Notes	Position
3.0L V6	Base, SE	Curved Radiator Hose	Upper

Part Interchange

ACDelco	20105S
AutoZone	C1085
Beck/Arnley	142-5610
CARQUEST	21085
Datsun/Nissan	21501-83G00
Datsun/Nissan	21501-57G00
Datsun/Nissan	21501-83G10
Datsun/Nissan	21501-3B005
Duralast	B70927
Ford	77FB-8260-DB
Ford	SBA-310160300
Ford	D8RZ-8260-A
Freshstart	136
Gates	21085
Goodyear	60926
Lazorlite	U34-2343
Motorcraft	KM949
NAPA	7794

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: Radiator Coolant HoseBrand: DaycoPart#: 81031

1992 Nissan D21 Radiator Coolant Hose DY 81031

Dayco Radiator Coolant Hose 81031 - Upper

Position: Upper

Description:

FLEX RADIATOR HOSE STANDARD DAYCO

Features:

Precision molded in standard lengths, Dayco’s Flex Radiator Hose is designed to replace straight or molded radiator hoses. The knitted reinforcement and synthetic EPDM construction meets SAE J20R4, Class D-2 requirements. This hose is designed to prevent splitting, ballooning, and elongation; and, resists ozone and other detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). The corrugations provide excellent hose flexibility without flattening or collapse. This Flex Radiator Hose is another Dayco® product proudly made in the USA. Note: This hose is NOT suitable for fuel or oil transfer.

Condition: New

Fitments
This Part Fits Following 1992 Nissan D21 Engines.
Engine Sub Model Notes Position
3.0L V6 Base, SE Flex Radiator Hose Upper

Engine	Sub Model	Notes	Position
3.0L V6	Base, SE	Flex Radiator Hose	Upper

Part Interchange

ACDelco	31610
Atlas	535
AutoZone	C6404
Autopar	RH19
Bowes	1110
Chief	C6404
Conoco	FH24
Datsun/Nissan	21501-20601
Duralast	81031
Fiat	4227246
Ford	C9PZ-8260-F
Ford	72EB-8260AA
Ford	7HF-8260AB
Ford	C2RZ-8260-AB
Ford	B5AA-8286-A
Freshstart	1111
Frigiking	71-01203
Gates	26404
Goodyear	52011
Goodyear	52012
Gulf	5011
Mobil	5M11
Mopar	BH603
Motorcraft	KA110
NAPA	FM70
Navistar	635319-R1
Pirelli	512
Renault	5548391
Texaco	1111
Texaco	106
Thermo-King	1082A64H02
Toyota	99522-01066
Uniroyal	5011
V&W	1111

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: Radiator Coolant HoseBrand: GatesPart#: 22185

1992 Nissan D21 Radiator Coolant Hose ZO 22185

Gates Radiator Coolant Hose 22185 - Upper

Position: Upper

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 17.7
Inside Diameter 1 : 1.34
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1992 Nissan D21 Engines.
Engine Sub Model Notes Fit Notes Position
2.4L L4 Base Molded Coolant Hose Fuel Type: GAS Upper
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.4L L4	Base	Molded Coolant Hose	Fuel Type: GAS	Upper

Part Name: Radiator Coolant HoseBrand: GatesPart#: 25251

1992 Nissan D21 Radiator Coolant Hose ZO 25251

Gates Radiator Coolant Hose 25251 - Upper

Position: Upper

Description:

Flexible Coolant Hose Standard

Part Specifications:

Centerline Length : 13
Inside Diameter 1 : 1.25

Features:

Gates Vulco-Flex(R) II hose will bend in almost any direction. It easily replicates the angles and planes of a wide variety of expensive original equipment coolant hose, for quick, easy replacement.
- Improved sealing surface for greater leak resistance and increased flexibility for easier installation.
- Heat and ozone resistant cover.
- Rated for SAE 20R5 Class D-2 performance.
- High temperature rating up to +257 Deg. F (+125 Deg. C).
Note: Gates recommends replacing clamps each time a new coolant hose is installed.
Caution: Do not use for fuel or oil transfer applications.
Gates Powering Progess

Condition: New

Fitments
This Part Fits Following 1992 Nissan D21 Engines.
Engine Sub Model Notes Fit Notes Position
3.0L V6 Base, SE Flexible Coolant Hose (Standard) Fuel Type: GAS Upper
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.0L V6	Base, SE	Flexible Coolant Hose (Standard)	Fuel Type: GAS	Upper

Part Name: Radiator Coolant HoseBrand: GatesPart#: 25384

1992 Nissan D21 Radiator Coolant Hose ZO 25384

Gates Radiator Coolant Hose 25384 - Lower

Position: Lower

Description:

Flexible Coolant Hose Standard

Part Specifications:

Centerline Length : 25
Inside Diameter 1 : 1.38

Features:

Gates Vulco-Flex(R) II hose will bend in almost any direction. It easily replicates the angles and planes of a wide variety of expensive original equipment coolant hose, for quick, easy replacement.
- Improved sealing surface for greater leak resistance and increased flexibility for easier installation.
- Heat and ozone resistant cover.
- Rated for SAE 20R5 Class D-2 performance.
- High temperature rating up to +257 Deg. F (+125 Deg. C).
Note: Gates recommends replacing clamps each time a new coolant hose is installed.
Caution: Do not use for fuel or oil transfer applications.
Gates Powering Progess

Condition: New

Fitments
This Part Fits Following 1992 Nissan D21 Engines.
Engine Sub Model Notes Fit Notes Position
2.4L L4 Base 1-Piece Hose - Flexible Coolant Hose (Standard) Fuel Type: GAS - Steering System: Manual Lower
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.4L L4	Base	1-Piece Hose - Flexible Coolant Hose (Standard)	Fuel Type: GAS - Steering System: Manual	Lower

Part Name: Radiator Coolant HoseBrand: DaycoPart#: 71626

1992 Nissan D21 Radiator Coolant Hose DY 71626

Dayco Radiator Coolant Hose 71626 - Lower, Lower - Pipe To Radiator

Position: Lower, Lower - Pipe To Radiator

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 14 1/2
End 1 Inside Diameter : 1 11/32
End 2 Inside Diameter : 1 11/32
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Condition: New

Fitments
This Part Fits Following 1992 Nissan D21 Engines.
Engine Sub Model Notes Position
2.4L L4 Base Cut to Fit - w/P.S. - Curved Radiator Hose Lower, Lower - Pipe To Radiator

Engine	Sub Model	Notes	Position
2.4L L4	Base	Cut to Fit - w/P.S. - Curved Radiator Hose	Lower, Lower - Pipe To Radiator

Part Interchange

ACDelco	24257L
ACDelco	24394L
CARQUEST	21873
CARQUEST	22416
Datsun/Nissan	21505-S3801
Datsun/Nissan	21503-7B400
Datsun/Nissan	21505-S3800
Datsun/Nissan	21505-86G16
Datsun/Nissan	21503-86G01
Datsun/Nissan	21503-86G11
Datsun/Nissan	21503-86G16
Datsun/Nissan	21504-3S500
Datsun/Nissan	21505-86G06
Duralast	D71626
Gates	21873
Gates	22416
Goodyear	61293
Goodyear	62470
NAPA	8563
NAPA	9049

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: Radiator Coolant HoseBrand: GatesPart#: 21873

1992 Nissan D21 Radiator Coolant Hose ZO 21873

Gates Radiator Coolant Hose 21873 - Lower, Lower - Pipe To Radiator

Position: Lower, Lower - Pipe To Radiator

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 25.5
Inside Diameter 1 : 1.34
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1992 Nissan D21 Engines.
Engine Sub Model Notes Fit Notes Position
2.4L L4 Base 2-Piece Hose; Cut to fit - Molded Coolant Hose Fuel Type: GAS - Steering System: Manual, Power Lower, Lower - Pipe To Radiator
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.4L L4	Base	2-Piece Hose; Cut to fit - Molded Coolant Hose	Fuel Type: GAS - Steering System: Manual, Power	Lower, Lower - Pipe To Radiator

Part Name: Radiator Coolant HoseBrand: GatesPart#: 24022

1992 Nissan D21 Radiator Coolant Hose ZO 24022

Gates Radiator Coolant Hose 24022 - Lower - Pipe To Engine

Position: Lower - Pipe To Engine

Description:

Straight Coolant Hose Standard

Part Specifications:

Centerline Length : 3
Centerline Length : .91
Centerline Length : 36
Inside Diameter 1 : 1.375
Working Pressure : 65
Construction : 2-Ply

Features:

Specially engineered stick hose is ideal for straight coolant/air connections in automotive, stationary engine, industrial and home applications.
- Heat-resistant cover.
- Meets SAE 20R1 Standard Wall Class D-2 requirements.
- Cover marked in one-inch increments for easy measuring and cutting allows custom fit light-duty coolant installations.
- Temperature Rating: -40 Deg. F to 257 Deg. F (-40 Deg. C to 125 Deg. C).
Caution: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 1992 Nissan D21 Engines.
Engine Sub Model Notes Fit Notes Position
2.4L L4 Base Cut to Length, 3" - Straight Coolant Hose (Standard) Fuel Type: GAS Lower - Pipe To Engine
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.4L L4	Base	Cut to Length, 3" - Straight Coolant Hose (Standard)	Fuel Type: GAS	Lower - Pipe To Engine

Part Name: Radiator Coolant HoseBrand: GatesPart#: 24026

1992 Nissan D21 Radiator Coolant Hose ZO 24026

Gates Radiator Coolant Hose 24026 - Lower - Engine To Pipe

Position: Lower - Engine To Pipe

Description:

Straight Coolant Hose Standard

Part Specifications:

Centerline Length : 3
Centerline Length : .91
Centerline Length : 36
Inside Diameter 1 : 1.625
Working Pressure : 55
Construction : 2-Ply

Features:

Specially engineered stick hose is ideal for straight coolant/air connections in automotive, stationary engine, industrial and home applications.
- Heat-resistant cover.
- Meets SAE 20R1 Standard Wall Class D-2 requirements.
- Cover marked in one-inch increments for easy measuring and cutting allows custom fit light-duty coolant installations.
- Temperature Rating: -40 Deg. F to 257 Deg. F (-40 Deg. C to 125 Deg. C).
Caution: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Condition: New

Fitments
This Part Fits Following 1992 Nissan D21 Engines.
Engine Sub Model Notes Fit Notes Position
3.0L V6 Base, SE Cut to Length, 3" - Straight Coolant Hose (Standard) Fuel Type: GAS Lower - Engine To Pipe
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

ACDelco	20225S
CARQUEST	21734
Datsun/Nissan	21503-3B010
Datsun/Nissan	21503-09G10
Datsun/Nissan	21503-09G00
Duralast	B71354
Gates	21734
NAPA	8425

My Vehicle:

1992 Nissan D21 Radiator Coolant Hose

Dayco Radiator Coolant Hose 71354 - Lower - Pipe To Radiator

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 21734 - Lower - Pipe To Radiator

Description:

Part Specifications:

Features:

Dayco Radiator Coolant Hose 71490 - Upper

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 20940 - Upper

Description:

Part Specifications:

Features:

Dayco Radiator Coolant Hose 70927 - Upper

Description:

Part Specifications:

Features:

Dayco Radiator Coolant Hose 81031 - Upper

Description:

Features:

Gates Radiator Coolant Hose 22185 - Upper

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 25251 - Upper

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 25384 - Lower

Description:

Part Specifications:

Features:

Dayco Radiator Coolant Hose 71626 - Lower, Lower - Pipe To Radiator

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 21873 - Lower, Lower - Pipe To Radiator

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 24022 - Lower - Pipe To Engine

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 24026 - Lower - Engine To Pipe

Description:

Part Specifications:

Features:

Related Belts and Cooling Parts

What Is MAP Price?

What Is MAP Price?

Core Return Process

Parts list X

Part added to your Kart X

Find exact fit part for your car. X