2008 Nissan Altima Radiator Coolant Hose

Part Name: Radiator Coolant HoseBrand: GatesPart#: 23500

Gates Radiator Coolant Hose 23500 - Upper - Filler Neck To Engine

Position: Upper - Filler Neck To Engine

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 28.5
Inside Diameter 1 : 1.30
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2008 Nissan Altima Engines.
Engine Sub Model Notes Fit Notes Position
2.5L L4 Base, Coupe, Hybrid, S, SL Molded Coolant Hose Fuel Type: ELECTRIC/GAS Upper - Filler Neck To Engine
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.5L L4	Base, Coupe, Hybrid, S, SL	Molded Coolant Hose	Fuel Type: ELECTRIC/GAS	Upper - Filler Neck To Engine

Part Name: Radiator Coolant HoseBrand: DaycoPart#: 72598

2008 Nissan Altima Radiator Coolant Hose DY 72598

Dayco Radiator Coolant Hose 72598 - Lower - Engine To Pipe

Position: Lower - Engine To Pipe

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 19 1/2
End 1 Inside Diameter : 1 3/8
End 1 Outside Diameter : 1 23/32
End 2 Inside Diameter : 1 3/8
End 2 Outside Diameter : 1 23/32
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Condition: New

Fitments
This Part Fits Following 2008 Nissan Altima Engines.
Engine Sub Model Notes Position
3.5L V6 Coupe, S, SE, SL Reuse OEM Connector - Curved Radiator Hose Lower - Engine To Pipe
Part Interchange
ACDelco 26598X
CARQUEST 23352
Datsun/Nissan 21503-ZN50A
Datsun/Nissan 21503-JA100
Duralast E72598
Gates 23352
Goodyear 66383
NAPA 16090
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
3.5L V6	Coupe, S, SE, SL	Reuse OEM Connector - Curved Radiator Hose	Lower - Engine To Pipe

Part Name: Radiator Coolant HoseBrand: DaycoPart#: 72405

2008 Nissan Altima Radiator Coolant Hose DY 72405

Dayco Radiator Coolant Hose 72405 - Upper - Filler Neck To Engine

Position: Upper - Filler Neck To Engine

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Dual I.D. Hose
Trunk Height : 23
End 1 Inside Diameter : 1 5/16
End 1 Outside Diameter : 1 5/8
End 2 Inside Diameter : 1 3/8
End 2 Outside Diameter : 1 21/32
Contains Protective Sleeve : Y
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Condition: New

Fitments
This Part Fits Following 2008 Nissan Altima Engines.
Engine Sub Model Notes Position
2.5L L4 Base, Coupe, Hybrid, S, SL Curved Radiator Hose Upper - Filler Neck To Engine

Engine	Sub Model	Notes	Position
2.5L L4	Base, Coupe, Hybrid, S, SL	Curved Radiator Hose	Upper - Filler Neck To Engine

Part Interchange

ACDelco	26596X
ACDelco	26641X
CARQUEST	23500
CARQUEST	23348
Datsun/Nissan	21501-9HA0A
Datsun/Nissan	21501-JA800
Datsun/Nissan	21501-JA000
Duralast	E72405
Gates	23500
Gates	23348
Goodyear	66303
Goodyear	66384
NAPA	16236
NAPA	16086

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: Radiator Coolant HoseBrand: DaycoPart#: 72406

2008 Nissan Altima Radiator Coolant Hose DY 72406

Dayco Radiator Coolant Hose 72406 - Lower

Position: Lower

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 20 1/2
End 1 Inside Diameter : 1 11/32
End 1 Outside Diameter : 1 5/8
End 2 Inside Diameter : 1 11/32
End 2 Outside Diameter : 1 5/8
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Condition: New

Fitments
This Part Fits Following 2008 Nissan Altima Engines.
Engine Sub Model Notes Position
2.5L L4 Base, Coupe, Hybrid, S, SL Curved Radiator Hose Lower
Part Interchange
ACDelco 26594X
CARQUEST 23345
Datsun/Nissan 21503-JA000
Duralast E72406
Gates 23345
Goodyear 66222
NAPA 21503-3TA0A
NAPA 16083
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
2.5L L4	Base, Coupe, Hybrid, S, SL	Curved Radiator Hose	Lower

Part Name: Radiator Coolant HoseBrand: GatesPart#: 23352

2008 Nissan Altima Radiator Coolant Hose ZO 23352

Gates Radiator Coolant Hose 23352 - Lower - Pipe To Engine

Position: Lower - Pipe To Engine

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 27.2
Inside Diameter 1 : 1.31
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2008 Nissan Altima Engines.
Engine Sub Model Notes Fit Notes Position
3.5L V6 Coupe, S, SE, SL Molded Coolant Hose Fuel Type: GAS Lower - Pipe To Engine
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.5L V6	Coupe, S, SE, SL	Molded Coolant Hose	Fuel Type: GAS	Lower - Pipe To Engine

Part Name: Radiator Coolant HoseBrand: DaycoPart#: 72590

2008 Nissan Altima Radiator Coolant Hose DY 72590

Dayco Radiator Coolant Hose 72590 - Upper - Filler Neck To Engine

Position: Upper - Filler Neck To Engine

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 22 1/2
End 1 Inside Diameter : 1 3/8
End 2 Inside Diameter : 1 3/8
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Condition: New

Fitments
This Part Fits Following 2008 Nissan Altima Engines.
Engine Sub Model Notes Position
3.5L V6 Coupe, S, SE, SL Reuse OEM Connector - Curved Radiator Hose Upper - Filler Neck To Engine
Part Interchange
ACDelco 26597X
CARQUEST 23350
Datsun/Nissan 21501-JA100
Datsun/Nissan 21501-9HA0B
Duralast E72590
Gates 23350
Goodyear 66221
NAPA 16088
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
3.5L V6	Coupe, S, SE, SL	Reuse OEM Connector - Curved Radiator Hose	Upper - Filler Neck To Engine

Part Name: Radiator Coolant HoseBrand: DaycoPart#: 72599

2008 Nissan Altima Radiator Coolant Hose DY 72599

Dayco Radiator Coolant Hose 72599 - Lower - Pipe To Radiator

Position: Lower - Pipe To Radiator

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 13 1/2
End 1 Inside Diameter : 1 3/8
End 2 Inside Diameter : 1 3/8
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Condition: New

Fitments
This Part Fits Following 2008 Nissan Altima Engines.
Engine Sub Model Notes Position
3.5L V6 Coupe, S, SE, SL Reuse OEM Connector - Curved Radiator Hose Lower - Pipe To Radiator
Part Interchange
ACDelco 22607M
CARQUEST 23351
Datsun/Nissan 21503-JA100
Datsun/Nissan 21503-ZN50A
Duralast D72599
Gates 23351
Goodyear 66382
NAPA 16089
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
3.5L V6	Coupe, S, SE, SL	Reuse OEM Connector - Curved Radiator Hose	Lower - Pipe To Radiator

Part Name: Radiator Coolant HoseBrand: GatesPart#: 23345

2008 Nissan Altima Radiator Coolant Hose ZO 23345

Gates Radiator Coolant Hose 23345 - Lower

Position: Lower

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 22.5
Inside Diameter 1 : 1.31
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2008 Nissan Altima Engines.
Engine Sub Model Notes Fit Notes Position
2.5L L4 Base, Coupe, Hybrid, S, SL Molded Coolant Hose Fuel Type: GAS Lower
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.5L L4	Base, Coupe, Hybrid, S, SL	Molded Coolant Hose	Fuel Type: GAS	Lower

Part Name: Radiator Coolant HoseBrand: GatesPart#: 23348

2008 Nissan Altima Radiator Coolant Hose ZO 23348

Gates Radiator Coolant Hose 23348 - Upper - Filler Neck To Engine

Position: Upper - Filler Neck To Engine

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 29.8
Inside Diameter 1 : 1.31
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2008 Nissan Altima Engines.
Engine Sub Model Notes Fit Notes Position
2.5L L4 Base, Coupe, Hybrid, S, SL Molded Coolant Hose Fuel Type: GAS Upper - Filler Neck To Engine
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.5L L4	Base, Coupe, Hybrid, S, SL	Molded Coolant Hose	Fuel Type: GAS	Upper - Filler Neck To Engine

Part Name: Radiator Coolant HoseBrand: DaycoPart#: 71638

2008 Nissan Altima Radiator Coolant Hose DY 71638

Dayco Radiator Coolant Hose 71638 - Upper - Radiator To Filler Neck

Position: Upper - Radiator To Filler Neck

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 10
End 1 Inside Diameter : 1 5/16
End 2 Inside Diameter : 1 5/16
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Condition: New

Fitments

This Part Fits Following 2008 Nissan Altima Engines.

Engine	Sub Model	Notes	Position
2.5L L4	Base, Coupe, Hybrid, S, SL	Cut to Fit - Curved Radiator Hose	Upper - Radiator To Filler Neck
3.5L V6	Coupe, S, SE, SL	Cut to Fit, Reuse OEM Connector - Curved Radiator Hose	Upper - Radiator To Filler Neck

Part Interchange

ACDelco	26348X
ACDelco	20190S
CARQUEST	22353
CARQUEST	21532
Datsun/Nissan	21501-JA100
Datsun/Nissan	21501-9HA0B
Datsun/Nissan	21501-JP00B
Datsun/Nissan	21501-JA800
Duralast	B71638
Ford	F32Z-8286-A
Ford	F32Z-8286-D
Gates	22353
Gates	21532
Goodyear	66303
Goodyear	66551
Goodyear	62658
Mazda	KL55-15-185
Mazda	KL55-15-185A
Mazda	BPE8-15-186
Mazda	KL11-15-185B
Motorcraft	KM2364
NAPA	8247
NAPA	8986

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: Radiator Coolant HoseBrand: GatesPart#: 23351

2008 Nissan Altima Radiator Coolant Hose ZO 23351

Gates Radiator Coolant Hose 23351 - Lower - Radiator To Pipe

Position: Lower - Radiator To Pipe

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 16
Inside Diameter 1 : 1.31
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2008 Nissan Altima Engines.
Engine Sub Model Notes Fit Notes Position
3.5L V6 Coupe, S, SE, SL Molded Coolant Hose Fuel Type: GAS Lower - Radiator To Pipe
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.5L V6	Coupe, S, SE, SL	Molded Coolant Hose	Fuel Type: GAS	Lower - Radiator To Pipe

Part Name: Radiator Coolant HoseBrand: GatesPart#: 22353

2008 Nissan Altima Radiator Coolant Hose ZO 22353

Gates Radiator Coolant Hose 22353 - Upper - Radiator To Filler Neck

Position: Upper - Radiator To Filler Neck

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 8.5
Inside Diameter 1 : 1.27
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments

This Part Fits Following 2008 Nissan Altima Engines.

Engine	Sub Model	Notes	Fit Notes	Position
2.5L L4	Base, Coupe, Hybrid, S, SL	Cut to fit - Molded Coolant Hose	Fuel Type: ELECTRIC/GAS, GAS	Upper - Radiator To Filler Neck
3.5L V6	Coupe, S, SE, SL	Cut to fit - Molded Coolant Hose	Fuel Type: GAS	Upper - Radiator To Filler Neck

Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: Radiator Coolant HoseBrand: GatesPart#: 23350

2008 Nissan Altima Radiator Coolant Hose ZO 23350

Gates Radiator Coolant Hose 23350 - Upper - Filler Neck To Engine

Position: Upper - Filler Neck To Engine

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 25.2
Inside Diameter 1 : 1.31
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2008 Nissan Altima Engines.
Engine Sub Model Notes Fit Notes Position
3.5L V6 Coupe, S, SE, SL Molded Coolant Hose Fuel Type: GAS Upper - Filler Neck To Engine
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

ACDelco	26598X
CARQUEST	23352
Datsun/Nissan	21503-ZN50A
Datsun/Nissan	21503-JA100
Duralast	E72598
Gates	23352
Goodyear	66383
NAPA	16090

ACDelco	26594X
CARQUEST	23345
Datsun/Nissan	21503-JA000
Duralast	E72406
Gates	23345
Goodyear	66222
NAPA	21503-3TA0A
NAPA	16083

ACDelco	26597X
CARQUEST	23350
Datsun/Nissan	21501-JA100
Datsun/Nissan	21501-9HA0B
Duralast	E72590
Gates	23350
Goodyear	66221
NAPA	16088

ACDelco	22607M
CARQUEST	23351
Datsun/Nissan	21503-JA100
Datsun/Nissan	21503-ZN50A
Duralast	D72599
Gates	23351
Goodyear	66382
NAPA	16089

My Vehicle:

2008 Nissan Altima Radiator Coolant Hose

Gates Radiator Coolant Hose 23500 - Upper - Filler Neck To Engine

Description:

Part Specifications:

Features:

Dayco Radiator Coolant Hose 72598 - Lower - Engine To Pipe

Description:

Part Specifications:

Features:

Dayco Radiator Coolant Hose 72405 - Upper - Filler Neck To Engine

Description:

Part Specifications:

Features:

Dayco Radiator Coolant Hose 72406 - Lower

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 23352 - Lower - Pipe To Engine

Description:

Part Specifications:

Features:

Dayco Radiator Coolant Hose 72590 - Upper - Filler Neck To Engine

Description:

Part Specifications:

Features:

Dayco Radiator Coolant Hose 72599 - Lower - Pipe To Radiator

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 23345 - Lower

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 23348 - Upper - Filler Neck To Engine

Description:

Part Specifications:

Features:

Dayco Radiator Coolant Hose 71638 - Upper - Radiator To Filler Neck

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 23351 - Lower - Radiator To Pipe

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 22353 - Upper - Radiator To Filler Neck

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 23350 - Upper - Filler Neck To Engine

Description:

Part Specifications:

Features:

Related Belts and Cooling Parts

What Is MAP Price?

What Is MAP Price?

Core Return Process

Parts list X

Part added to your Kart X

Find exact fit part for your car. X