Home

1995 Mazda B3000

My Vehicle:

1995 Mazda B3000 Radiator Coolant Hose

We have found 5 Radiator Coolant Hose for

1995 Mazda B3000

Part Name: Radiator Coolant HoseBrand: DaycoPart#: 71824

Dayco Radiator Coolant Hose 71824 - Lower

Position: Lower

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 14
End 1 Inside Diameter : 1 7/16
End 2 Inside Diameter : 1 7/16
Contains Protective Sleeve : Y
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Condition: New

Fitments
This Part Fits Following 1995 Mazda B3000 Engines.
Engine Sub Model Notes Position
3.0L V6 SE, Base Curved Radiator Hose Lower
Part Interchange
Duralast C71824
Ford F57Z-8286-D
Ford F57Z-8286-B
Ford F57A-8B273-AC
Motorcraft KM2978
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
3.0L V6	SE, Base	Curved Radiator Hose	Lower

Part Name: Radiator Coolant HoseBrand: DaycoPart#: 71823

1995 Mazda B3000 Radiator Coolant Hose DY 71823

Dayco Radiator Coolant Hose 71823 - Upper

Position: Upper

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 17 3/4
End 1 Inside Diameter : 1 7/16
End 2 Inside Diameter : 1 7/16
Contains Protective Sleeve : Y
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Condition: New

Fitments
This Part Fits Following 1995 Mazda B3000 Engines.
Engine Sub Model Notes Position
3.0L V6 Base, SE Curved Radiator Hose Upper

Engine	Sub Model	Notes	Position
3.0L V6	Base, SE	Curved Radiator Hose	Upper

Part Interchange

ACDelco	26277X
CARQUEST	22144
Duralast	D71823
Ford	F5TZ-8260-G
Ford	F5TZ-8260-D
Ford	F67A-8B274-CA
Ford	F87A-8B274-AB
Ford	F87Z-8260-AA
Ford	F87A-8B274-AV
Ford	F57Z-8260-D
Ford	F67A-8B277-CA
Ford	F57Z-8260-A
Ford	2L54-8B274-AC
Ford	F57A-8B273-AB
Ford	F57A-8B274-AB
Ford	F57A-8B274-AD
Freshstart	1088
Freshstart	62140
Gates	22144
Goodyear	62140
Motorcraft	KM3428
Motorcraft	KM2981
Motorcraft	KM4941
Motorcraft	KM2927
Motorcraft	KM2977
NAPA	8811

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: Radiator Coolant HoseBrand: GatesPart#: 22144

1995 Mazda B3000 Radiator Coolant Hose ZO 22144

Gates Radiator Coolant Hose 22144 - Upper

Position: Upper

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 28.9
Inside Diameter 1 : 1.45
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1995 Mazda B3000 Engines.
Engine Sub Model Notes Fit Notes Position
3.0L V6 Base, SE Molded Coolant Hose Fuel Type: GAS Upper
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.0L V6	Base, SE	Molded Coolant Hose	Fuel Type: GAS	Upper

Part Name: Radiator Coolant HoseBrand: GatesPart#: 25487

1995 Mazda B3000 Radiator Coolant Hose ZO 25487

Gates Radiator Coolant Hose 25487 - Upper

Position: Upper

Description:

Flexible Coolant Hose Standard

Part Specifications:

Centerline Length : 30
Inside Diameter 1 : 1.5

Features:

Gates Vulco-Flex(R) II hose will bend in almost any direction. It easily replicates the angles and planes of a wide variety of expensive original equipment coolant hose, for quick, easy replacement.
- Improved sealing surface for greater leak resistance and increased flexibility for easier installation.
- Heat and ozone resistant cover.
- Rated for SAE 20R5 Class D-2 performance.
- High temperature rating up to +257 Deg. F (+125 Deg. C).
Note: Gates recommends replacing clamps each time a new coolant hose is installed.
Caution: Do not use for fuel or oil transfer applications.
Gates Powering Progess

Condition: New

Fitments
This Part Fits Following 1995 Mazda B3000 Engines.
Engine Sub Model Notes Fit Notes Position
3.0L V6 Base, SE Flexible Coolant Hose (Standard) Fuel Type: GAS Upper
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.0L V6	Base, SE	Flexible Coolant Hose (Standard)	Fuel Type: GAS	Upper

Part Name: Radiator Coolant HoseBrand: GatesPart#: 22254

1995 Mazda B3000 Radiator Coolant Hose ZO 22254

Gates Radiator Coolant Hose 22254 - Lower

Position: Lower

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 15.6
Number of Branches : 1
Inside Diameter 1 : 1.47
Inside Diameter 2 : 1.47
Inside Diameter 3 : .6
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1995 Mazda B3000 Engines.
Engine Sub Model Notes Fit Notes Position
3.0L V6 Base, SE Molded Coolant Hose Fuel Type: GAS Lower
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Duralast	C71824
Ford	F57Z-8286-D
Ford	F57Z-8286-B
Ford	F57A-8B273-AC
Motorcraft	KM2978

My Vehicle:

1995 Mazda B3000 Radiator Coolant Hose

Dayco Radiator Coolant Hose 71824 - Lower

Description:

Part Specifications:

Features:

Dayco Radiator Coolant Hose 71823 - Upper

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 22144 - Upper

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 25487 - Upper

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 22254 - Lower

Description:

Part Specifications:

Features:

Related Belts and Cooling Parts

What Is MAP Price?

What Is MAP Price?

Core Return Process

Parts list X

Part added to your Kart X

Find exact fit part for your car. X