2002 Ford Ranger Radiator Coolant Hose

Part Name: Radiator Coolant HoseBrand: DaycoPart#: 72190

Dayco Radiator Coolant Hose 72190 - Upper

Position: Upper

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 17
End 1 Inside Diameter : 1 1/2
End 2 Inside Diameter : 1 1/2
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Condition: New

Fitments
This Part Fits Following 2002 Ford Ranger Engines.
Engine Sub Model Notes Position
3.0L V6 Edge, XL, XLT Curved Radiator Hose Upper
Part Interchange
ACDelco 26277X
CARQUEST 22144
Duralast E72190
Ford 3L54-8B274-AA
Freshstart 1187
Gates 22144
Goodyear 62293
Goodyear 62257
Motorcraft KM3428
NAPA 8811
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
3.0L V6	Edge, XL, XLT	Curved Radiator Hose	Upper

Part Name: Radiator Coolant HoseBrand: DaycoPart#: 71957

2002 Ford Ranger Radiator Coolant Hose DY 71957

Dayco Radiator Coolant Hose 71957 - Lower

Position: Lower

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 14
End 1 Inside Diameter : 1 15/32
End 2 Inside Diameter : 1 15/32
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Condition: New

Fitments
This Part Fits Following 2002 Ford Ranger Engines.
Engine Sub Model Notes Position
4.0L V6 Edge, XL, XLT Curved Radiator Hose Lower

Engine	Sub Model	Notes	Position
4.0L V6	Edge, XL, XLT	Curved Radiator Hose	Lower

Part Interchange

ACDelco	22478M
ACDelco	22716M
ACDelco	24015L
ACDelco	24378L
CARQUEST	7277
CARQUEST	23852
CARQUEST	22350
CARQUEST	22793
CARQUEST	20470
Duralast	D71957
Ford	F77Z-8286-AB
Ford	F87A-8B273-BC
Ford	F77A-8B273-FB
Ford	F67A-8B273-KA
Ford	XL24-8B273-DA
Ford	4L54-8B273-BA
Ford	F67A-8B273-TA
Ford	1L24-8B273-CF
Ford	F87A-8B273-KA
Ford	F87Z-8286-BA
Ford	XL24-8B273-BA
Ford	1L2Z-8286-BA
Ford	F87Z-8286-HA
Ford	2L54-8B273-DA
Freshstart	62346
Freshstart	62200
Freshstart	1277
Gates	22793
Gates	22350
Gates	20470
Gates	23852
Goodyear	62200
Goodyear	62344
Goodyear	62346
Mazda	ZZP2-15-185
Motorcraft	KM4332
Motorcraft	KM4548
Motorcraft	KM3242
Motorcraft	KM3399
NAPA	8983
NAPA	16521
NAPA	9428
NAPA	7277

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: Radiator Coolant HoseBrand: GatesPart#: 23272

2002 Ford Ranger Radiator Coolant Hose ZO 23272

Gates Radiator Coolant Hose 23272 - Upper

Position: Upper

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 26.2
Inside Diameter 1 : 1.48
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2002 Ford Ranger Engines.
Engine Sub Model Notes Fit Notes Position
3.0L V6 Edge, XL, XLT, Sport Molded Coolant Hose Fuel Type: FLEX, GAS Upper
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.0L V6	Edge, XL, XLT, Sport	Molded Coolant Hose	Fuel Type: FLEX, GAS	Upper

Part Name: Radiator Coolant HoseBrand: GatesPart#: 22350

2002 Ford Ranger Radiator Coolant Hose ZO 22350

Gates Radiator Coolant Hose 22350 - Lower

Position: Lower

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 15
Inside Diameter 1 : 1.47
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2002 Ford Ranger Engines.
Engine Sub Model Notes Fit Notes Position
4.0L V6 Edge, XL, XLT Molded Coolant Hose Fuel Type: GAS Lower
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
4.0L V6	Edge, XL, XLT	Molded Coolant Hose	Fuel Type: GAS	Lower

Part Name: Radiator Coolant HoseBrand: DaycoPart#: 72189

2002 Ford Ranger Radiator Coolant Hose DY 72189

Dayco Radiator Coolant Hose 72189 - Lower

Position: Lower

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Dual I.D. Hose
Trunk Height : 20
End 1 Inside Diameter : 1 9/32
End 2 Inside Diameter : 1 15/32
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Condition: New

Fitments
This Part Fits Following 2002 Ford Ranger Engines.
Engine Sub Model Notes Position
2.3L L4 XL, XLT Supersedes 72188 - Curved Radiator Hose Lower
Part Interchange
ACDelco 24461L
CARQUEST 22654
Duralast E72189
Ford 1L5Z-8286-AD
Ford 2L54-8B273-CA
Gates 22654
Goodyear 62558
Motorcraft KM4584
NAPA 9287
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
2.3L L4	XL, XLT	Supersedes 72188 - Curved Radiator Hose	Lower

Part Name: Radiator Coolant HoseBrand: DaycoPart#: 72396

2002 Ford Ranger Radiator Coolant Hose DY 72396

Dayco Radiator Coolant Hose 72396 - Upper

Position: Upper

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Dual I.D. Hose
Trunk Height : 15 1/2
End 1 Inside Diameter : 1 9/32
End 2 Inside Diameter : 1 1/2
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Condition: New

Fitments
This Part Fits Following 2002 Ford Ranger Engines.
Engine Sub Model Notes Position
2.3L L4 XL, XLT Curved Radiator Hose Upper
Part Interchange
ACDelco 22432M
ACDelco 22608M
CARQUEST 22653
CARQUEST 23357
Duralast D72396
Ford 2L5Z-8260-CA
Ford 3L54-8B274-CA
Gates 23357
Gates 22653
Goodyear 62245
Motorcraft KM4774
NAPA 9286
NAPA 16095
Toyota 16572-0P130
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
2.3L L4	XL, XLT	Curved Radiator Hose	Upper

Part Name: Radiator Coolant HoseBrand: GatesPart#: 22654

2002 Ford Ranger Radiator Coolant Hose ZO 22654

Gates Radiator Coolant Hose 22654 - Lower

Position: Lower

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 22.41
Inside Diameter 1 : 1.25
Inside Diameter 2 : 1.46
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2002 Ford Ranger Engines.
Engine Sub Model Notes Fit Notes Position
2.3L L4 XL, XLT Molded Coolant Hose Fuel Type: GAS Lower
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.3L L4	XL, XLT	Molded Coolant Hose	Fuel Type: GAS	Lower

Part Name: Radiator Coolant HoseBrand: GatesPart#: 22646

2002 Ford Ranger Radiator Coolant Hose ZO 22646

Gates Radiator Coolant Hose 22646 - Upper

Position: Upper

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 35.58
Inside Diameter 1 : 1.47
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2002 Ford Ranger Engines.
Engine Sub Model Notes Fit Notes Position
4.0L V6 Edge, XL, XLT Molded Coolant Hose Fuel Type: GAS Upper
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
4.0L V6	Edge, XL, XLT	Molded Coolant Hose	Fuel Type: GAS	Upper

Part Name: Radiator Coolant HoseBrand: GatesPart#: 22653

2002 Ford Ranger Radiator Coolant Hose ZO 22653

Gates Radiator Coolant Hose 22653 - Upper

Position: Upper

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 17.34
Inside Diameter 1 : 1.25
Inside Diameter 2 : 1.46
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2002 Ford Ranger Engines.
Engine Sub Model Notes Fit Notes Position
2.3L L4 XL, XLT Molded Coolant Hose Fuel Type: GAS Upper
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.3L L4	XL, XLT	Molded Coolant Hose	Fuel Type: GAS	Upper

Part Name: Radiator Coolant HoseBrand: DaycoPart#: 72051

2002 Ford Ranger Radiator Coolant Hose DY 72051

Dayco Radiator Coolant Hose 72051 - Upper

Position: Upper

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 15
End 1 Inside Diameter : 1 1/2
End 2 Inside Diameter : 1 1/2
Contains Protective Sleeve : Y
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Condition: New

Fitments
This Part Fits Following 2002 Ford Ranger Engines.
Engine Sub Model Notes Position
4.0L V6 Edge, XL, XLT Curved Radiator Hose Upper
Part Interchange
ACDelco 24460L
CARQUEST 22646
Duralast E72051
Ford 7L54-8B274-BA
Ford 4L5Z-8260-BA
Ford 4L54-8B274-BA
Ford 1L54-8B274-BD
Ford 1L54-8B274-BC
Gates 22646
Goodyear 62821
Motorcraft KM 4791
NAPA 9279
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
4.0L V6	Edge, XL, XLT	Curved Radiator Hose	Upper

Part Name: Radiator Coolant HoseBrand: DaycoPart#: 72021

2002 Ford Ranger Radiator Coolant Hose DY 72021

Dayco Radiator Coolant Hose 72021 - Lower

Position: Lower

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Branched Hose
Trunk Height : 17
End 1 Inside Diameter : 1 7/16
End 2 Inside Diameter : 1 7/16
End 3 Inside Diameter : 5/8
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Condition: New

Fitments
This Part Fits Following 2002 Ford Ranger Engines.
Engine Sub Model Notes Position
3.0L V6 Edge, XL, XLT Curved Radiator Hose Lower

Engine	Sub Model	Notes	Position
3.0L V6	Edge, XL, XLT	Curved Radiator Hose	Lower

Part Interchange

ACDelco	22340M
ACDelco	24603L
CARQUEST	22351
CARQUEST	23269
Duralast	E72021
Ford	F87A-8B273-AB
Ford	7L54-8B273-AB
Ford	F87A-8B273-AA
Ford	4L54-8B273-AA
Ford	2L5Z-8286-AA
Ford	F87Z-8286-AA
Ford	2L5Z-8286-AB
Freshstart	62406
Freshstart	1188
Gates	22351
Gates	23269
Goodyear	62258
Goodyear	62406
Motorcraft	KM3429
Motorcraft	KM4817
Motorcraft	KM4713
NAPA	16007
NAPA	8984

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: Radiator Coolant HoseBrand: GatesPart#: 22351

2002 Ford Ranger Radiator Coolant Hose ZO 22351

Gates Radiator Coolant Hose 22351 - Lower

Position: Lower

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 17.31
Number of Branches : 1
Inside Diameter 1 : 1.47
Inside Diameter 2 : 1.47
Inside Diameter 3 : .6
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2002 Ford Ranger Engines.
Engine Sub Model Notes Fit Notes Position
3.0L V6 Edge, XL, XLT, Sport Molded Coolant Hose Fuel Type: FLEX, GAS Lower
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

ACDelco	26277X
CARQUEST	22144
Duralast	E72190
Ford	3L54-8B274-AA
Freshstart	1187
Gates	22144
Goodyear	62293
Goodyear	62257
Motorcraft	KM3428
NAPA	8811

ACDelco	24461L
CARQUEST	22654
Duralast	E72189
Ford	1L5Z-8286-AD
Ford	2L54-8B273-CA
Gates	22654
Goodyear	62558
Motorcraft	KM4584
NAPA	9287

ACDelco	22432M
ACDelco	22608M
CARQUEST	22653
CARQUEST	23357
Duralast	D72396
Ford	2L5Z-8260-CA
Ford	3L54-8B274-CA
Gates	23357
Gates	22653
Goodyear	62245
Motorcraft	KM4774
NAPA	9286
NAPA	16095
Toyota	16572-0P130

ACDelco	24460L
CARQUEST	22646
Duralast	E72051
Ford	7L54-8B274-BA
Ford	4L5Z-8260-BA
Ford	4L54-8B274-BA
Ford	1L54-8B274-BD
Ford	1L54-8B274-BC
Gates	22646
Goodyear	62821
Motorcraft	KM 4791
NAPA	9279

My Vehicle:

2002 Ford Ranger Radiator Coolant Hose

Dayco Radiator Coolant Hose 72190 - Upper

Description:

Part Specifications:

Features:

Dayco Radiator Coolant Hose 71957 - Lower

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 23272 - Upper

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 22350 - Lower

Description:

Part Specifications:

Features:

Dayco Radiator Coolant Hose 72189 - Lower

Description:

Part Specifications:

Features:

Dayco Radiator Coolant Hose 72396 - Upper

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 22654 - Lower

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 22646 - Upper

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 22653 - Upper

Description:

Part Specifications:

Features:

Dayco Radiator Coolant Hose 72051 - Upper

Description:

Part Specifications:

Features:

Dayco Radiator Coolant Hose 72021 - Lower

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 22351 - Lower

Description:

Part Specifications:

Features:

Related Belts and Cooling Parts

What Is MAP Price?

What Is MAP Price?

Core Return Process

Parts list X

Part added to your Kart X

Find exact fit part for your car. X