2001 Ford Ranger HVAC Heater Hose

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87830

Dayco HVAC Heater Hose 87830 - Tee To Heater

Position: Tee To Heater

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 7
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 2001 Ford Ranger Engines.
Engine Sub Model Notes Position
2.3L L4 XL, XLT Small I.D. Heater Hose Tee To Heater
Part Interchange
ACDelco 14822S
ACDelco 14405S
CARQUEST 19954
CARQUEST 19333
Duralast B87830
Gates 19333
Gates 19954
Goodyear 64274
NAPA 11954
NAPA 11333
Toyota 87245-42540
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
2.3L L4	XL, XLT	Small I.D. Heater Hose	Tee To Heater

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87837

2001 Ford Ranger HVAC Heater Hose DY 87837

Dayco HVAC Heater Hose 87837 - Heater To Tee

Position: Heater To Tee

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 10
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 2001 Ford Ranger Engines.
Engine Sub Model Notes Position
2.3L L4 XL, XLT Small I.D. Heater Hose Heater To Tee

Engine	Sub Model	Notes	Position
2.3L L4	XL, XLT	Small I.D. Heater Hose	Heater To Tee

Part Interchange

ACDelco	14573S
ACDelco	14332S
CARQUEST	18954
CARQUEST	19237
Duralast	C87837
Ford	1L5Z-18472-FA
Gates	19237
Gates	18054
Gates	18594
General Motors	92223299
Honda	79721-SZA-A00
Motorcraft	KH55
NAPA	11237
NAPA	10054
Toyota	87245-2D550

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 19140

2001 Ford Ranger HVAC Heater Hose ZO 19140

Gates HVAC Heater Hose 19140 - Heater To Pipe-1

Position: Heater To Pipe-1

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 13.7
Inside Diameter 1 : .63
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2001 Ford Ranger Engines.
Engine Sub Model Notes Fit Notes Position
2.3L L4 XL, XLT Cut to fit - Molded Heater Hose Fuel Type: GAS Heater To Pipe-1
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.3L L4	XL, XLT	Cut to fit - Molded Heater Hose	Fuel Type: GAS	Heater To Pipe-1

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87605

2001 Ford Ranger HVAC Heater Hose DY 87605

Dayco HVAC Heater Hose 87605 - Heater Inlet

Position: Heater Inlet

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Dual I.D. Hose
Trunk Height : 20
End 1 Inside Diameter : 3/4
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 2001 Ford Ranger Engines.
Engine Sub Model Notes Position
2.5L L4 XL, XLT Small I.D. Heater Hose Heater Inlet

Engine	Sub Model	Notes	Position
2.5L L4	XL, XLT	Small I.D. Heater Hose	Heater Inlet

Part Interchange

ACDelco	18001L
CARQUEST	18072
Chrysler	04809438AD
Cummins	303702
Duralast	E87605
Ford	F87H-18D334-CA
Ford	F87H-18D334-EA
Ford	F87Z-18472-CB
Ford	XL5H-18D334-AA
Freshstart	4373
Gates	18072
Goodyear	63109
Honda	79725-S6M-A00
NAPA	10072
V&W	303605

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: DaycoPart#: 80401

2001 Ford Ranger HVAC Heater Hose DY 80401

Dayco HVAC Heater Hose 80401 - Heater Hose, Pipe To Valve

Position: Heater Hose, Pipe To Valve

Description:

90 DEGREE COOLANT HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 12
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® 90 Degree Molded Coolant Hose is designed for vehicles that require special heater hoses with a molded 90 degree elbow to fit tight engine compartment routings. Multiple 90 degree hoses can be used with Dayco plastic connectors to fit complex routings. Knitted reinforcement and all synthetic EPDM construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. Dayco’s Molded Radiator and By-Pass Hose has a convenient plastic hang strap for quick and easy merchandising. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684.

Condition: New

Fitments
This Part Fits Following 2001 Ford Ranger Engines.
Engine Sub Model Notes Position
2.5L L4 XL, XLT 90? Molded Coolant Hose Heater Hose
4.0L V6 Edge, XL, XLT 90? Molded Coolant Hose Pipe To Valve

Engine	Sub Model	Notes	Position
2.5L L4	XL, XLT	90? Molded Coolant Hose	Heater Hose
4.0L V6	Edge, XL, XLT	90? Molded Coolant Hose	Pipe To Valve

Part Interchange

ACDelco	14494S
ACDelco	16382M
ACDelco	16328M
ACDelco	16198M
ACDelco	18060L
Atlas	MH-61
CARQUEST	28467
CARQUEST	19498
CARQUEST	19377
CARQUEST	19290
CARQUEST	18888
Chrysler	4677422
Chrysler	55056673AC
Chrysler	MR439546
Chrysler	55037607AB
Chrysler	55037607AC
Chrysler	55036415
Chrysler	5058859AC
Chrysler	55036777
Duralast	D80401
Ford	1R3H-18K579-CB
Ford	1L5H-18472-FA
Ford	1R3Z-18472-CA
Ford	YR3H-18K580-AA
Ford	1R3H-18K579-CE
Ford	E9SE-8597-BE
Ford	F6ZZ-18472-CC
Ford	F77A-18472-A
Ford	F77Z-18472-A
Ford	F77H-18D334-BC
Ford	F77Z-18472-BA
Ford	F6ZH-18K580-AF
Ford	F77A-18472-BB
Ford	E9SZ-8597-A
Ford	F7DH-18K579-BA
Ford	E9SZ-8597-B
Ford	XF1H-18K579-B
Freshstart	4102
Gates	19498
Gates	19290
Gates	18888
Gates	28467
Gates	19377
General Motors	10284269
General Motors	22712142
General Motors	1641237
General Motors	14100798
General Motors	10284268
General Motors	55036942
General Motors	10007473
General Motors	22551240
General Motors	10145102
Goodyear	63812
Goodyear	64323
Honda	19504-RAA-A00
Kia	0K30E-61-212A
Mazda	NC10-61-212
Mitsubishi	MR296878
Motorcraft	KH57
Motorcraft	KM1747
NAPA	10888
NAPA	11290
NAPA	11498
NAPA	9808
NAPA	11377
Pirelli	43812
Suzuki	17856-86Z00
Toyota	87245-1B251
Toyota	87245-2D550
Toyota	87245-3A820
Volvo Cars	9485591
White	33-0135712

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 18916

2001 Ford Ranger HVAC Heater Hose ZO 18916

Gates HVAC Heater Hose 18916 - Heater To Water Pump

Position: Heater To Water Pump

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 36.6
Inside Diameter 1 : .6
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2001 Ford Ranger Engines.
Engine Sub Model Notes Fit Notes Position
2.5L L4 XL, XLT W/O A.C. - Molded Heater Hose Fuel Type: GAS Heater To Water Pump
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.5L L4	XL, XLT	W/O A.C. - Molded Heater Hose	Fuel Type: GAS	Heater To Water Pump

Part Name: HVAC Heater HoseBrand: GatesPart#: 18072

2001 Ford Ranger HVAC Heater Hose ZO 18072

Gates HVAC Heater Hose 18072 - Heater Valve To Water Pump

Position: Heater Valve To Water Pump

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 25.6
Inside Diameter 1 : .62
Inside Diameter 2 : .75
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2001 Ford Ranger Engines.
Engine Sub Model Notes Fit Notes Position
2.5L L4 XL, XLT W/A.C.; Cut to fit - Molded Heater Hose Fuel Type: GAS Heater Valve To Water Pump
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.5L L4	XL, XLT	W/A.C.; Cut to fit - Molded Heater Hose	Fuel Type: GAS	Heater Valve To Water Pump

Part Name: HVAC Heater HoseBrand: DaycoPart#: 80400

2001 Ford Ranger HVAC Heater Hose DY 80400

Dayco HVAC Heater Hose 80400 - Pipe to Engine (Inlet)

Position: Pipe to Engine (Inlet)

Description:

90 DEGREE COOLANT HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 6
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® 90 Degree Molded Coolant Hose is designed for vehicles that require special heater hoses with a molded 90 degree elbow to fit tight engine compartment routings. Multiple 90 degree hoses can be used with Dayco plastic connectors to fit complex routings. Knitted reinforcement and all synthetic EPDM construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. Dayco’s Molded Radiator and By-Pass Hose has a convenient plastic hang strap for quick and easy merchandising. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684.

Condition: New

Fitments
This Part Fits Following 2001 Ford Ranger Engines.
Engine Sub Model Notes Position
4.0L V6 Edge, XL, XLT 90? Molded Coolant Hose Pipe to Engine (Inlet)

Engine	Sub Model	Notes	Position
4.0L V6	Edge, XL, XLT	90? Molded Coolant Hose	Pipe to Engine (Inlet)

Part Interchange

ACDelco	14228S
ACDelco	14160S
ACDelco	14229S
ACDelco	14237S
ACDelco	20227S
ACDelco	14405S
ACDelco	14148S
ACDelco	14243S
Atlas	MH-60
CARQUEST	19005
CARQUEST	19333
CARQUEST	28466
CARQUEST	21738
CARQUEST	19035
CARQUEST	21862
CARQUEST	21739
CARQUEST	21742
Chrysler	3918266
Chrysler	3918200
Chrysler	39182000
Datsun/Nissan	14056-88G05
Datsun/Nissan	21306-16A00
Datsun/Nissan	14055-57Y11
Datsun/Nissan	14056-77A01
Duralast	B80400
Ford	F1DE-8A506-AA
Ford	D4AZ-18472-G
Ford	E6AE-8A527-AA
Ford	F1DE-8A527-AA
Ford	E6DZ-8A506-A
Ford	E6DZ-8A527-A
Ford	E9SE-8597-B
Ford	E8SZ-8597-B
Ford	E6AE-8A506-AA
Ford	F40Y-18472-A
Ford	F5RZ-8290-A
Ford	E6AE-8A506-BB
Ford	F6DH-18D334-AD
Ford	F6DZ-18472-AB
Ford	F6DH-18D334-AB
Freshstart	4318
Freshstart	4101
Gates	28466
Gates	21739
Gates	21742
Gates	21862
Gates	21738
Gates	19005
Gates	19333
Gates	19645
Gates	19035
General Motors	10215999
General Motors	10197652
General Motors	10171104
General Motors	10284263
General Motors	55036950
General Motors	15708635
General Motors	15713591
General Motors	15553626
General Motors	12603761
General Motors	35232953
General Motors	12590013
General Motors	3523265
General Motors	10021318
General Motors	10145098
General Motors	10135305
General Motors	10038502
General Motors	21030565
General Motors	15984157
General Motors	22685822
General Motors	25662102
General Motors	10145118
General Motors	30013103
General Motors	25525213
General Motors	22704430
General Motors	22704428
Goodyear	63052
Goodyear	63806
Honda	79118-S3V-A00
Honda	19508-P72-000
Honda	19504-PEO-010
Honda	19504-PE0-010
Honda	79118-S3V-A01
Honda	79117-S3V-A00
Honda	79722-SD5-A00
Honda	19508-PE0-010
Isuzu	8-94384-326-3
Isuzu	8-94384-326-2
Kia	K01315421
Lazorlite	L34-8589
Mazda	KJ01-15-261
Motorcraft	KM1809
Motorcraft	KM1748
NAPA	11035
NAPA	9807
NAPA	11333
NAPA	11005
Pirelli	43806
Toyota	16261-74010
Toyota	16261-74030
Toyota	16264-74030
Toyota	87245-3D520
Volvo Cars	3M5H-18K580-AB

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: DaycoPart#: 80404

2001 Ford Ranger HVAC Heater Hose DY 80404

Dayco HVAC Heater Hose 80404 - Heater Outlet

Position: Heater Outlet

Description:

90 DEGREE COOLANT HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 24
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® 90 Degree Molded Coolant Hose is designed for vehicles that require special heater hoses with a molded 90 degree elbow to fit tight engine compartment routings. Multiple 90 degree hoses can be used with Dayco plastic connectors to fit complex routings. Knitted reinforcement and all synthetic EPDM construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. Dayco’s Molded Radiator and By-Pass Hose has a convenient plastic hang strap for quick and easy merchandising. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684.

Condition: New

Fitments
This Part Fits Following 2001 Ford Ranger Engines.
Engine Sub Model Notes Position
2.5L L4 XL, XLT 90? Molded Coolant Hose Heater Outlet

Engine	Sub Model	Notes	Position
2.5L L4	XL, XLT	90? Molded Coolant Hose	Heater Outlet

Part Interchange

ACDelco	18367L
ACDelco	18240L
ACDelco	18287L
ACDelco	18151L
ACDelco	18393L
ACDelco	18231L
Acura	79721-SR3-J30
Atlas	MH-64
CARQUEST	28470
CARQUEST	19532
CARQUEST	19142
CARQUEST	19120
CARQUEST	19103
CARQUEST	19458
Chrysler	55037228
Chrysler	4662215
Chrysler	55036924
Duralast	E80404
Ford	5L84-18K579-AH
Ford	F6DZ-18472A
Ford	F50Y-18472-B
Ford	F50H-18K579-AC
Ford	99BB-18C553-AC
Ford	F50Y-18472-A
Ford	F80H-18K580-AC
Ford	F6DZ-18472-GA
Ford	F50H-18K580-AA
Ford	F80Z-18472-AB
Ford	F87H-18472-CA
Freshstart	4105
Gates	19103
Gates	19142
Gates	19120
Gates	19458
Gates	28470
Gates	19532
General Motors	10427571
General Motors	10317834
General Motors	10021566
General Motors	10294247
General Motors	10415189
General Motors	10400424
General Motors	52362096
Goodyear	63824
Honda	79725-SCV-A00
Hyundai	97321-25160
Hyundai	97321-26100
Hyundai	97322-26100
Mazda	GK3J-61-24XD
Mazda	3K3J-61-24XD
NAPA	11142
NAPA	11120
NAPA	11103
NAPA	11458
NAPA	11532
NAPA	9811
Pirelli	43824
Toyota	87245-42200
Toyota	87245-3D480

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87784

2001 Ford Ranger HVAC Heater Hose DY 87784

Dayco HVAC Heater Hose 87784 - Tee To Pipe

Position: Tee To Pipe

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 10
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 2001 Ford Ranger Engines.
Engine Sub Model Notes Position
4.0L V6 Edge, XL, XLT Cut to Fit - Small I.D. Heater Hose Tee To Pipe

Engine	Sub Model	Notes	Position
4.0L V6	Edge, XL, XLT	Cut to Fit - Small I.D. Heater Hose	Tee To Pipe

Part Interchange

ACDelco	14418S
ACDelco	14425S
ACDelco	14396S
CARQUEST	19375
CARQUEST	19315
Chrysler	55115895AB
Duralast	C87784
Gates	19375
Gates	19359
Gates	19315
General Motors	12603191
General Motors	88970287
Honda	79721-TM8-A00
NAPA	11315
NAPA	11375
NAPA	11540
Toyota	87245-0C390
Toyota	87245-01140
Toyota	87245-3A780

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 28478

2001 Ford Ranger HVAC Heater Hose ZO 28478

Gates HVAC Heater Hose 28478 - Tee-1 To Thermostat

Position: Tee-1 To Thermostat

Description:

90 Deg Molded Heater Hose

Part Specifications:

Centerline Length : 32
Arm Length 1 : 8
Arm Length 1 : 203.2
Arm Length 2 : 24
Arm Length 2 : 609.6
Inside Diameter 1 : .75
Angle : 90

Features:

Specially designed for difficult heater hose applications requiring sharp 90 degree bends in the hose. Eliminates the need for extensive inventory of OE type curved heater hose. Just 22 sizes handle thousands of applications.
- Engineered to resist electrochemical degradation the leading cause of hose failure.
- Resists water permeation.
- Similar to heater SAE 20R3 Type EC Class D-2.
- Use with heater hose connectors and bulk heater hose for virtually complete molded heater hose coverage.
- Temperature Rating: -40F to 275F (-40C to 135C).
Caution: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Condition: New

Fitments
This Part Fits Following 2001 Ford Ranger Engines.
Engine Sub Model Notes Fit Notes Position
2.5L L4 XL, XLT W/O A.C.; Cut to fit - 90º Molded Heater Hose Fuel Type: GAS Tee-1 To Thermostat
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.5L L4	XL, XLT	W/O A.C.; Cut to fit - 90º Molded Heater Hose	Fuel Type: GAS	Tee-1 To Thermostat

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87838

2001 Ford Ranger HVAC Heater Hose DY 87838

Dayco HVAC Heater Hose 87838 - Tee To Water Pump

Position: Tee To Water Pump

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 12
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 2001 Ford Ranger Engines.
Engine Sub Model Notes Position
2.3L L4 XL, XLT Small I.D. Heater Hose Tee To Water Pump
Part Interchange
ACDelco 14442S
CARQUEST 19389
Duralast D87838
Ford 1L5H-18472-GA
Gates 19389
General Motors 88958007
General Motors 25742895
NAPA 11389
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
2.3L L4	XL, XLT	Small I.D. Heater Hose	Tee To Water Pump

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87875

2001 Ford Ranger HVAC Heater Hose DY 87875

Dayco HVAC Heater Hose 87875 - Heater To Pipe

Position: Heater To Pipe

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 11
End 1 Inside Diameter : 5/8
End 1 Outside Diameter : 15/16
End 2 Inside Diameter : 5/8
End 2 Outside Diameter : 15/16
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 2001 Ford Ranger Engines.
Engine Sub Model Notes Position
2.3L L4 XL, XLT Cut to Fit - Small I.D. Heater Hose Heater To Pipe

Engine	Sub Model	Notes	Position
2.3L L4	XL, XLT	Cut to Fit - Small I.D. Heater Hose	Heater To Pipe

Part Interchange

ACDelco	16401M
ACDelco	16402M
ACDelco	14298S
ACDelco	16089M
Acura	79725-SR3-J30
CARQUEST	19423
CARQUEST	19140
CARQUEST	18866
Duralast	D87875
Gates	19422
Gates	19423
Gates	19140
Gates	18866
Goodyear	63257
Goodyear	64403
NAPA	11423
NAPA	11140
NAPA	10866
NAPA	11422
Subaru (cars)	72411-FE020
Subaru (cars)	72411-FE010
Subaru (cars)	72411-FE023

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 19104

2001 Ford Ranger HVAC Heater Hose ZO 19104

Gates HVAC Heater Hose 19104 - Valve To Thermostat

Position: Valve To Thermostat

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 19.5
Inside Diameter 1 : .6
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2001 Ford Ranger Engines.
Engine Sub Model Notes Fit Notes Position
2.5L L4 XL, XLT W/A.C. - Molded Heater Hose Fuel Type: GAS Valve To Thermostat
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.5L L4	XL, XLT	W/A.C. - Molded Heater Hose	Fuel Type: GAS	Valve To Thermostat

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87735

2001 Ford Ranger HVAC Heater Hose DY 87735

Dayco HVAC Heater Hose 87735 - Tee To Engine

Position: Tee To Engine

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 13 1/2
End 1 Inside Diameter : 19/32
End 2 Inside Diameter : 19/32
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 2001 Ford Ranger Engines.
Engine Sub Model Notes Position
3.0L V6 XLT, Edge, XL Small I.D. Heater Hose Tee To Engine
Part Interchange
Duralast D87735
Ford F87Z-18472-DB
Ford F87H-18472-DA
Ford F57H-18472-EA
Ford 4L54-18C266-AB
Ford F5TZ-18472-K
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
3.0L V6	XLT, Edge, XL	Small I.D. Heater Hose	Tee To Engine

Part Name: HVAC Heater HoseBrand: GatesPart#: 28407

2001 Ford Ranger HVAC Heater Hose ZO 28407

Gates HVAC Heater Hose 28407 - Tee-1 To Engine

Position: Tee-1 To Engine

Description:

Straight Heater Hose Standard

Part Specifications:

Centerline Length : 50
Centerline Length : 15.24
Centerline Length : 600
Inside Diameter 1 : .25
Working Pressure : 60
Weight Per Length : 6 lbs./Carton

Features:

Premium hose constructed for long service life.
- Unaffected by most coolants and non-oil based coolant additives and by high cooling system pressures
- Good resistance to high temperatures for extended periods of time
- Similar to SAE 20R3 Class D-2
- Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 2001 Ford Ranger Engines.
Engine Sub Model Notes Fit Notes Position
2.5L L4 XL, XLT Cut to Length, 13" - Straight Heater Hose (Standard) Fuel Type: GAS Tee-1 To Engine
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.5L L4	XL, XLT	Cut to Length, 13" - Straight Heater Hose (Standard)	Fuel Type: GAS	Tee-1 To Engine

Part Name: HVAC Heater HoseBrand: GatesPart#: 22468

2001 Ford Ranger HVAC Heater Hose ZO 22468

Gates HVAC Heater Hose 22468 - Heater To Engine

Position: Heater To Engine

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 34.01
Number of Branches : 1
Inside Diameter 1 : .6
Inside Diameter 2 : .6
Inside Diameter 3 : .25
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2001 Ford Ranger Engines.
Engine Sub Model Notes Fit Notes Position
3.0L V6 Edge, XL, XLT Molded Coolant Hose Fuel Type: FLEX, GAS Heater To Engine
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.0L V6	Edge, XL, XLT	Molded Coolant Hose	Fuel Type: FLEX, GAS	Heater To Engine

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87942

2001 Ford Ranger HVAC Heater Hose DY 87942

Dayco HVAC Heater Hose 87942 - Heater - Inlet Assembly

Position: Heater - Inlet Assembly

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Branched Hose
Trunk Height : 25 1/4
End 1 Inside Diameter : 5/8
End 1 Outside Diameter : 31/32
End 2 Inside Diameter : 5/8
End 2 Outside Diameter : 31/32
End 3 Inside Diameter : 1/4
End 3 Outside Diameter : 9/16
Contains Protective Sleeve : Y
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

This Dayco® Molded Heater Hose branched assembly is designed to replace OEM coolant hose and provide long, reliable service. Made with the same bends and routing as the OEM assembly, this hose is designed to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. This hose is made with a protective sleeve that protects contact areas against abrasion and heat.

Condition: New

Fitments
This Part Fits Following 2001 Ford Ranger Engines.
Engine Sub Model Notes Position
3.0L V6 Edge, XL, XLT Small I.D. Heater Hose Heater - Inlet Assembly
Part Interchange
ACDelco 18210L
CARQUEST 22468
Duralast E87942
Ford F87Z-18472-FA
Ford F87Z-18472-EB
Ford F87H-18D334-DA
Gates 22468
Goodyear 62848
Motorcraft KH212
NAPA 9101
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
3.0L V6	Edge, XL, XLT	Small I.D. Heater Hose	Heater - Inlet Assembly

Part Name: HVAC Heater HoseBrand: GatesPart#: 28409

2001 Ford Ranger HVAC Heater Hose ZO 28409

Gates HVAC Heater Hose 28409 - PCV Valve Heater To Intake Manifold PCV Heater, Intake Manifold PCV Heater To Pipe-2, Radiator To Reservoir

Position: PCV Valve Heater To Intake Manifold PCV Heater, Intake Manifold PCV Heater To Pipe-2, Radiator To Reservoir

Description:

Straight Heater Hose Standard

Part Specifications:

Centerline Length : 50
Centerline Length : 15.24
Centerline Length : 600
Inside Diameter 1 : .375
Working Pressure : 60
Weight Per Length : 8.25 lbs./Carton

Features:

Premium hose constructed for long service life.
- Unaffected by most coolants and non-oil based coolant additives and by high cooling system pressures
- Good resistance to high temperatures for extended periods of time
- Similar to SAE 20R3 Class D-2
- Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments

This Part Fits Following 2001 Ford Ranger Engines.

Engine	Sub Model	Notes	Fit Notes	Position
2.5L L4	XL, XLT	Cut to Length, 28" - Straight Heater Hose (Standard)	Fuel Type: GAS	Radiator To Reservoir
4.0L V6	Edge, XL, XLT	Cut to Length, 12" - Straight Heater Hose (Standard)	Fuel Type: GAS	PCV Valve Heater To Intake Manifold PCV Heater, Intake Manifold PCV Heater To Pipe-2

Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 22469

2001 Ford Ranger HVAC Heater Hose ZO 22469

Gates HVAC Heater Hose 22469 - Heater To Water Pump

Position: Heater To Water Pump

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 34.93
Number of Branches : 1
Inside Diameter 1 : .6
Inside Diameter 2 : .6
Inside Diameter 3 : .25
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2001 Ford Ranger Engines.
Engine Sub Model Notes Fit Notes Position
3.0L V6 Edge, XL, XLT W/O A.C. - Molded Coolant Hose Fuel Type: FLEX, GAS Heater To Water Pump
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.0L V6	Edge, XL, XLT	W/O A.C. - Molded Coolant Hose	Fuel Type: FLEX, GAS	Heater To Water Pump

Part Name: HVAC Heater HoseBrand: GatesPart#: 28411

2001 Ford Ranger HVAC Heater Hose ZO 28411

Gates HVAC Heater Hose 28411 - Heater To Heater Valve, Heater To Pipe-2, Heater To Tee-1, Tee-1 To Heater Valve

Position: Heater To Heater Valve, Heater To Pipe-2, Heater To Tee-1, Tee-1 To Heater Valve

Description:

Straight Heater Hose Standard

Part Specifications:

Centerline Length : 50
Centerline Length : 15.24
Centerline Length : 600
Inside Diameter 1 : .625
Working Pressure : 60
Weight Per Length : 11.70 lbs./Carton

Features:

Premium hose constructed for long service life.
- Unaffected by most coolants and non-oil based coolant additives and by high cooling system pressures
- Good resistance to high temperatures for extended periods of time
- Similar to SAE 20R3 Class D-2
- Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments

This Part Fits Following 2001 Ford Ranger Engines.

Engine	Sub Model	Notes	Fit Notes	Position
2.5L L4	XL, XLT	W/A.C.; Cut to Length, 7" - Straight Heater Hose (Standard)	Fuel Type: GAS	Heater To Heater Valve, Heater To Tee-1, Tee-1 To Heater Valve
4.0L V6	Edge, XL, XLT	Cut to Length, 16" - Straight Heater Hose (Standard)	Fuel Type: GAS	Heater To Pipe-2

Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

ACDelco	14822S
ACDelco	14405S
CARQUEST	19954
CARQUEST	19333
Duralast	B87830
Gates	19333
Gates	19954
Goodyear	64274
NAPA	11954
NAPA	11333
Toyota	87245-42540

ACDelco	14442S
CARQUEST	19389
Duralast	D87838
Ford	1L5H-18472-GA
Gates	19389
General Motors	88958007
General Motors	25742895
NAPA	11389

Duralast	D87735
Ford	F87Z-18472-DB
Ford	F87H-18472-DA
Ford	F57H-18472-EA
Ford	4L54-18C266-AB
Ford	F5TZ-18472-K

ACDelco	18210L
CARQUEST	22468
Duralast	E87942
Ford	F87Z-18472-FA
Ford	F87Z-18472-EB
Ford	F87H-18D334-DA
Gates	22468
Goodyear	62848
Motorcraft	KH212
NAPA	9101

My Vehicle:

2001 Ford Ranger HVAC Heater Hose

Dayco HVAC Heater Hose 87830 - Tee To Heater

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87837 - Heater To Tee

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19140 - Heater To Pipe-1

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87605 - Heater Inlet

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 80401 - Heater Hose, Pipe To Valve

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18916 - Heater To Water Pump

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18072 - Heater Valve To Water Pump

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 80400 - Pipe to Engine (Inlet)

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 80404 - Heater Outlet

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87784 - Tee To Pipe

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28478 - Tee-1 To Thermostat

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87838 - Tee To Water Pump

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87875 - Heater To Pipe

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19104 - Valve To Thermostat

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87735 - Tee To Engine

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28407 - Tee-1 To Engine

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 22468 - Heater To Engine

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87942 - Heater - Inlet Assembly

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28409 - PCV Valve Heater To Intake Manifold PCV Heater, Intake Manifold PCV Heater To Pipe-2, Radiator To Reservoir

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 22469 - Heater To Water Pump

Description: