2012 Ford Fusion Radiator Coolant Hose

Part Name: Radiator Coolant HoseBrand: DaycoPart#: 87928

Dayco Radiator Coolant Hose 87928 - Lower - Tee To Reservoir

Position: Lower - Tee To Reservoir

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Dual I.D. Hose
Trunk Height : 22 1/2
End 1 Inside Diameter : 3/4
End 2 Inside Diameter : 1
Contains Protective Sleeve : Y
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose and provide long, reliable service. Made with the same bends and routing as the OEM assembly, this hose is designed to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. This hose is made with a protective sleeve that protects contact areas against abrasion and heat.

Condition: New

Fitments
This Part Fits Following 2012 Ford Fusion Engines.
Engine Sub Model Notes Position
3.5L V6 Sport Small I.D. Heater Hose Lower - Tee To Reservoir
Part Interchange
Duralast E87928
Ford 7H6Z-8075-B
Ford 7H63-8C351-AD
Motorcraft KM-4926
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
3.5L V6	Sport	Small I.D. Heater Hose	Lower - Tee To Reservoir

Part Name: Radiator Coolant HoseBrand: GatesPart#: 23684

2012 Ford Fusion Radiator Coolant Hose ZO 23684

Gates Radiator Coolant Hose 23684 - Upper

Position: Upper

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 16.8
Inside Diameter 1 : 1.47
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2012 Ford Fusion Engines.
Engine Sub Model Notes Fit Notes Position
3.0L V6 SE, SEL Molded Coolant Hose Fuel Type: FLEX, GAS Upper
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.0L V6	SE, SEL	Molded Coolant Hose	Fuel Type: FLEX, GAS	Upper

Part Name: Radiator Coolant HoseBrand: GatesPart#: 23682

2012 Ford Fusion Radiator Coolant Hose ZO 23682

Gates Radiator Coolant Hose 23682 - Upper

Position: Upper

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 20.2
Inside Diameter 1 : 1.47
Inside Diameter 2 : 1.25
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2012 Ford Fusion Engines.
Engine Sub Model Notes Fit Notes Position
2.5L L4 Hybrid, S, SE, SEL Molded Coolant Hose Fuel Type: GAS Upper
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.5L L4	Hybrid, S, SE, SEL	Molded Coolant Hose	Fuel Type: GAS	Upper

Part Name: Radiator Coolant HoseBrand: GatesPart#: 23669

2012 Ford Fusion Radiator Coolant Hose ZO 23669

Gates Radiator Coolant Hose 23669 - Lower

Position: Lower

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 44
Inside Diameter 1 : 1.48
Number of Branches : 0

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2012 Ford Fusion Engines.
Engine Sub Model Notes Fit Notes Position
3.5L V6 Sport Molded Coolant Hose Fuel Type: GAS Lower
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.5L V6	Sport	Molded Coolant Hose	Fuel Type: GAS	Lower

Part Name: Radiator Coolant HoseBrand: GatesPart#: 24491

2012 Ford Fusion Radiator Coolant Hose ZO 24491

Gates Radiator Coolant Hose 24491 - Upper - Radiator To Pipe

Position: Upper - Radiator To Pipe

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 10.5
Inside Diameter 1 : 1.49
Number of Branches : 0

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2012 Ford Fusion Engines.
Engine Sub Model Notes Fit Notes Position
2.5L L4 Hybrid, S, SE, SEL Molded Coolant Hose Fuel Type: ELECTRIC/GAS Upper - Radiator To Pipe
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.5L L4	Hybrid, S, SE, SEL	Molded Coolant Hose	Fuel Type: ELECTRIC/GAS	Upper - Radiator To Pipe

Part Name: Radiator Coolant HoseBrand: DaycoPart#: 72569

2012 Ford Fusion Radiator Coolant Hose DY 72569

Dayco Radiator Coolant Hose 72569 - Upper

Position: Upper

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 21 1/2
End 1 Inside Diameter : 1 1/2
End 2 Inside Diameter : 1 1/2
Contains Protective Sleeve : Y
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges. This hose is also made with a protective sleeve that protects contact areas against abrasion and heat.

Condition: New

Fitments
This Part Fits Following 2012 Ford Fusion Engines.
Engine Sub Model Notes Position
3.5L V6 Sport Curved Radiator Hose Upper
Part Interchange
ACDelco 24687L
CARQUEST 23679
Duralast E72569
Ford 7H6Z-8260-C
Ford 7H63-8B274-AD
Gates 23679
Goodyear 66138
Motorcraft KM4957
NAPA 16369
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
3.5L V6	Sport	Curved Radiator Hose	Upper

Part Name: Radiator Coolant HoseBrand: GatesPart#: 23661

2012 Ford Fusion Radiator Coolant Hose ZO 23661

Gates Radiator Coolant Hose 23661 - Lower

Position: Lower

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 18.5
Number of Branches : 2
Inside Diameter 1 : 1.5
Inside Diameter 2 : 1.31
Inside Diameter 3 : .75
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2012 Ford Fusion Engines.
Engine Sub Model Notes Fit Notes Position
2.5L L4 Hybrid, S, SE, SEL Molded Coolant Hose Fuel Type: GAS Lower
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.5L L4	Hybrid, S, SE, SEL	Molded Coolant Hose	Fuel Type: GAS	Lower

Part Name: Radiator Coolant HoseBrand: GatesPart#: 23663

2012 Ford Fusion Radiator Coolant Hose ZO 23663

Gates Radiator Coolant Hose 23663 - Lower Rear

Position: Lower Rear

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 17.1
Number of Branches : 1
Inside Diameter 1 : 1.5
Inside Diameter 2 : 1.31
Inside Diameter 3 : .75
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2012 Ford Fusion Engines.
Engine Sub Model Notes Fit Notes Position
2.5L L4 Hybrid, S, SE, SEL Molded Coolant Hose Fuel Type: ELECTRIC/GAS Lower Rear
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.5L L4	Hybrid, S, SE, SEL	Molded Coolant Hose	Fuel Type: ELECTRIC/GAS	Lower Rear

Part Name: Radiator Coolant HoseBrand: GatesPart#: 23679

2012 Ford Fusion Radiator Coolant Hose ZO 23679

Gates Radiator Coolant Hose 23679 - Upper

Position: Upper

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 25.6
Inside Diameter 1 : 1.47
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2012 Ford Fusion Engines.
Engine Sub Model Notes Fit Notes Position
3.5L V6 Sport Molded Coolant Hose Fuel Type: GAS Upper
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

My Vehicle:

2012 Ford Fusion Radiator Coolant Hose

Dayco Radiator Coolant Hose 87928 - Lower - Tee To Reservoir

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 23684 - Upper

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 23682 - Upper

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 23669 - Lower

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 24491 - Upper - Radiator To Pipe

Description:

Part Specifications:

Features:

Dayco Radiator Coolant Hose 72569 - Upper

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 23661 - Lower

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 23663 - Lower Rear

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 23679 - Upper

Description:

Part Specifications:

Features:

Related Belts and Cooling Parts

Duralast	E87928
Ford	7H6Z-8075-B
Ford	7H63-8C351-AD
Motorcraft	KM-4926

ACDelco	24687L
CARQUEST	23679
Duralast	E72569
Ford	7H6Z-8260-C
Ford	7H63-8B274-AD
Gates	23679
Goodyear	66138
Motorcraft	KM4957
NAPA	16369

My Vehicle:

2012 Ford Fusion Radiator Coolant Hose

Dayco Radiator Coolant Hose 87928 - Lower - Tee To Reservoir

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 23684 - Upper

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 23682 - Upper

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 23669 - Lower

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 24491 - Upper - Radiator To Pipe

Description:

Part Specifications:

Features:

Dayco Radiator Coolant Hose 72569 - Upper

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 23661 - Lower

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 23663 - Lower Rear

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 23679 - Upper

Description:

Part Specifications:

Features:

Related Belts and Cooling Parts

What Is MAP Price?

What Is MAP Price?

Core Return Process

Parts list X

Part added to your Kart X

Find exact fit part for your car. X