2001 Ford Focus Radiator Coolant Hose

Part Name: Radiator Coolant HoseBrand: DaycoPart#: 72165

Dayco Radiator Coolant Hose 72165 - Lower - Engine To Pipe

Position: Lower - Engine To Pipe

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Dual I.D. Hose
Trunk Height : 10
End 1 Inside Diameter : 1 3/8
End 2 Inside Diameter : 1 7/16
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Condition: New

Fitments
This Part Fits Following 2001 Ford Focus Engines.
Engine Sub Model Notes Position
2.0L L4 SE, ZTS, ZX3, LX Curved Radiator Hose Lower - Engine To Pipe

Engine	Sub Model	Notes	Position
2.0L L4	SE, ZTS, ZX3, LX	Curved Radiator Hose	Lower - Engine To Pipe

Part Interchange

ACDelco	22365M
ACDelco	20641S
BMW	11.53.1.718.982
CARQUEST	24144
CARQUEST	22501
Duralast	C72165
Ford	98AB-8B273-CL
Ford	YS4Z-8286-CA
Ford	1M51-8B273-BA
Freshstart	1249
Gates	24144
Gates	22501
Goodyear	62276
Motorcraft	KM4493
NAPA	16821
NAPA	9134

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: Radiator Coolant HoseBrand: GatesPart#: 22501

2001 Ford Focus Radiator Coolant Hose ZO 22501

Gates Radiator Coolant Hose 22501 - Lower - Pipe To Water Pump

Position: Lower - Pipe To Water Pump

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 13.2
Inside Diameter 1 : 1.31
Inside Diameter 2 : 1.44
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2001 Ford Focus Engines.
Engine Sub Model Notes Fit Notes Position
2.0L L4 LX, SE, ZTS, ZX3 Molded Coolant Hose Cylinder Head Type: SOHC - Fuel Type: GAS Lower - Pipe To Water Pump
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.0L L4	LX, SE, ZTS, ZX3	Molded Coolant Hose	Cylinder Head Type: SOHC - Fuel Type: GAS	Lower - Pipe To Water Pump

Part Name: Radiator Coolant HoseBrand: DaycoPart#: 72166

2001 Ford Focus Radiator Coolant Hose DY 72166

Dayco Radiator Coolant Hose 72166 - Lower - Pipe To Radiator

Position: Lower - Pipe To Radiator

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Dual I.D. Hose
Trunk Height : 8
End 1 Inside Diameter : 1 1/4
End 2 Inside Diameter : 1 3/8
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Condition: New

Fitments
This Part Fits Following 2001 Ford Focus Engines.
Engine Sub Model Notes Position
2.0L L4 SE, ZTS, ZX3, LX Curved Radiator Hose Lower - Pipe To Radiator
Part Interchange
ACDelco 20329S
CARQUEST 22500
Duralast B72166
Ford YS4Z-8286-CA
Ford 1M51-8B273-BA
Ford 98AB-8B273-CL
Freshstart 1248
Gates 22500
Goodyear 62275
Motorcraft KM4493
NAPA 9133
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
2.0L L4	SE, ZTS, ZX3, LX	Curved Radiator Hose	Lower - Pipe To Radiator

Part Name: Radiator Coolant HoseBrand: DaycoPart#: 72075

2001 Ford Focus Radiator Coolant Hose DY 72075

Dayco Radiator Coolant Hose 72075 - Upper

Position: Upper

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 13 1/2
End 1 Inside Diameter : 1 1/4
End 2 Inside Diameter : 1 1/4
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Condition: New

Fitments
This Part Fits Following 2001 Ford Focus Engines.
Engine Sub Model Notes Position
2.0L L4 SE, ZX3, LX, ZTS Curved Radiator Hose Upper
Part Interchange
ACDelco 22363M
CARQUEST 22503
Duralast D72075
Ford 98AB-8B274-CF
Ford YS4Z-8260-CE
Ford 1M51-8B274-AA
Gates 22503
Goodyear 62295
Motorcraft KM4496
NAPA 9136
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
2.0L L4	SE, ZX3, LX, ZTS	Curved Radiator Hose	Upper

Part Name: Radiator Coolant HoseBrand: DaycoPart#: 71996

2001 Ford Focus Radiator Coolant Hose DY 71996

Dayco Radiator Coolant Hose 71996 - Upper

Position: Upper

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 15
End 1 Inside Diameter : 1 1/4
End 2 Inside Diameter : 1 1/4
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Condition: New

Fitments
This Part Fits Following 2001 Ford Focus Engines.
Engine Sub Model Notes Position
2.0L L4 SE, ZTS, ZX3, LX Curved Radiator Hose Upper

Engine	Sub Model	Notes	Position
2.0L L4	SE, ZTS, ZX3, LX	Curved Radiator Hose	Upper

Part Interchange

ACDelco	22364M
CARQUEST	22502
Duralast	D71996
Ford	98AB-8B274-EA
Ford	YS4Z-8260-EA
Ford	YS4Z-8260-EB
Ford	3S4Z-8260-BB
Ford	3S4Z-8260-BC
Ford	1M51-8B274-BA
Ford	3S4Z-8260-BA
Ford	3S41-8B274-BC
Freshstart	1268
Gates	22502
Goodyear	66577
Motorcraft	KM4782
Motorcraft	KM4773
Motorcraft	KM4497
NAPA	9135

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: Radiator Coolant HoseBrand: GatesPart#: 22500

2001 Ford Focus Radiator Coolant Hose ZO 22500

Gates Radiator Coolant Hose 22500 - Lower - Radiator To Pipe

Position: Lower - Radiator To Pipe

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 9.8
Inside Diameter 1 : 1.26
Inside Diameter 2 : 1.36
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2001 Ford Focus Engines.
Engine Sub Model Notes Fit Notes Position
2.0L L4 LX, SE, ZTS, ZX3 Molded Coolant Hose Cylinder Head Type: SOHC - Fuel Type: GAS Lower - Radiator To Pipe
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.0L L4	LX, SE, ZTS, ZX3	Molded Coolant Hose	Cylinder Head Type: SOHC - Fuel Type: GAS	Lower - Radiator To Pipe

Part Name: Radiator Coolant HoseBrand: GatesPart#: 22502

2001 Ford Focus Radiator Coolant Hose ZO 22502

Gates Radiator Coolant Hose 22502 - Upper

Position: Upper

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 22.7
Inside Diameter 1 : 1.24
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2001 Ford Focus Engines.
Engine Sub Model Notes Fit Notes Position
2.0L L4 LX, SE, ZTS, ZX3 Molded Coolant Hose Cylinder Head Type: DOHC - Fuel Type: GAS Upper
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.0L L4	LX, SE, ZTS, ZX3	Molded Coolant Hose	Cylinder Head Type: DOHC - Fuel Type: GAS	Upper

Part Name: Radiator Coolant HoseBrand: GatesPart#: 22503

2001 Ford Focus Radiator Coolant Hose ZO 22503

Gates Radiator Coolant Hose 22503 - Upper

Position: Upper

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 22.5
Inside Diameter 1 : 1.24
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2001 Ford Focus Engines.
Engine Sub Model Notes Fit Notes Position
2.0L L4 LX, SE, ZTS, ZX3 Molded Coolant Hose Cylinder Head Type: SOHC - Fuel Type: GAS Upper
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.0L L4	LX, SE, ZTS, ZX3	Molded Coolant Hose	Cylinder Head Type: SOHC - Fuel Type: GAS	Upper

Part Name: Radiator Coolant HoseBrand: DaycoPart#: 71997

2001 Ford Focus Radiator Coolant Hose DY 71997

Dayco Radiator Coolant Hose 71997 - Lower

Position: Lower

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Branched Hose
Trunk Height : 11 1/2
End 1 Inside Diameter : 1 1/4
End 2 Inside Diameter : 1 5/16
End 3 Inside Diameter : 3/4
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Condition: New

Fitments
This Part Fits Following 2001 Ford Focus Engines.
Engine Sub Model Notes Position
2.0L L4 SE, ZTS, LX, ZX3 Curved Radiator Hose Lower

Engine	Sub Model	Notes	Position
2.0L L4	SE, ZTS, LX, ZX3	Curved Radiator Hose	Lower

Part Interchange

ACDelco	24464L
CARQUEST	22504
Duralast	E71997
Ford	1M51-8B273-AB
Ford	98AB-8B273-FB
Ford	YS4Z-8286-FA
Ford	3S4Z-8286-BA
Ford	3S4Z-8286-BC
Ford	3S4Z-8286-BB
Gates	22504
Goodyear	62472
Motorcraft	KM4770
Motorcraft	KM4752
Motorcraft	KM4735
Motorcraft	KM4707
Motorcraft	KM4492
NAPA	9137

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: Radiator Coolant HoseBrand: GatesPart#: 22504

2001 Ford Focus Radiator Coolant Hose ZO 22504

Gates Radiator Coolant Hose 22504 - Lower

Position: Lower

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 15.09
Number of Branches : 1
Inside Diameter 1 : 1.25
Inside Diameter 2 : 1.31
Inside Diameter 3 : .75
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2001 Ford Focus Engines.
Engine Sub Model Notes Fit Notes Position
2.0L L4 LX, SE, ZTS, ZX3 Molded Coolant Hose Cylinder Head Type: DOHC - Fuel Type: GAS Lower
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

ACDelco	20329S
CARQUEST	22500
Duralast	B72166
Ford	YS4Z-8286-CA
Ford	1M51-8B273-BA
Ford	98AB-8B273-CL
Freshstart	1248
Gates	22500
Goodyear	62275
Motorcraft	KM4493
NAPA	9133

ACDelco	22363M
CARQUEST	22503
Duralast	D72075
Ford	98AB-8B274-CF
Ford	YS4Z-8260-CE
Ford	1M51-8B274-AA
Gates	22503
Goodyear	62295
Motorcraft	KM4496
NAPA	9136

My Vehicle:

2001 Ford Focus Radiator Coolant Hose

Dayco Radiator Coolant Hose 72165 - Lower - Engine To Pipe

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 22501 - Lower - Pipe To Water Pump

Description:

Part Specifications:

Features:

Dayco Radiator Coolant Hose 72166 - Lower - Pipe To Radiator

Description:

Part Specifications:

Features:

Dayco Radiator Coolant Hose 72075 - Upper

Description:

Part Specifications:

Features:

Dayco Radiator Coolant Hose 71996 - Upper

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 22500 - Lower - Radiator To Pipe

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 22502 - Upper

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 22503 - Upper

Description:

Part Specifications:

Features:

Dayco Radiator Coolant Hose 71997 - Lower

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 22504 - Lower

Description:

Part Specifications:

Features:

Related Belts and Cooling Parts

What Is MAP Price?

What Is MAP Price?

Core Return Process

Parts list X

Part added to your Kart X

Find exact fit part for your car. X