2011 Ford F-250 Super Duty Radiator Coolant Hose

Part Name: Radiator Coolant HoseBrand: GatesPart#: 24396

Gates Radiator Coolant Hose 24396 - Lower - Oil Cooler To Engine

Position: Lower - Oil Cooler To Engine

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 12.25
Inside Diameter 1 : 1.5
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2011 Ford F-250 Super Duty Engines.
Engine Sub Model Notes Fit Notes Position
6.2L V8 King Ranch, Lariat, XL, XLT Molded Coolant Hose Fuel Type: FLEX Lower - Oil Cooler To Engine
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
6.2L V8	King Ranch, Lariat, XL, XLT	Molded Coolant Hose	Fuel Type: FLEX	Lower - Oil Cooler To Engine

Part Name: Radiator Coolant HoseBrand: GatesPart#: 24412

2011 Ford F-250 Super Duty Radiator Coolant Hose ZO 24412

Gates Radiator Coolant Hose 24412 - Lower - Radiator To Connector

Position: Lower - Radiator To Connector

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 27.25
Inside Diameter 1 : 1.96
Inside Diameter 2 : 1.99
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2011 Ford F-250 Super Duty Engines.
Engine Sub Model Notes Fit Notes Position
6.2L V8 King Ranch, Lariat, XL, XLT Molded Coolant Hose Fuel Type: FLEX Lower - Radiator To Connector
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
6.2L V8	King Ranch, Lariat, XL, XLT	Molded Coolant Hose	Fuel Type: FLEX	Lower - Radiator To Connector

Part Name: Radiator Coolant HoseBrand: DaycoPart#: 72727

2011 Ford F-250 Super Duty Radiator Coolant Hose DY 72727

Dayco Radiator Coolant Hose 72727 - Upper

Position: Upper

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Dual I.D. Hose
Trunk Height : 21 1/2
End 1 Inside Diameter : 1 1/2
End 1 Outside Diameter : 1 7/8
End 2 Inside Diameter : 1 13/16
End 2 Outside Diameter : 2 9/32
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges. This hose also includes a protective sleeve that protects contact areas against abrasion and heat. This hose has a “quick connect” end assembled onto the hose for fast, convenient installation. With this Dayco® product you avoid the hassle of buying a separate connector and clamp and having to install it before the hose can be used.

Condition: New

Fitments
This Part Fits Following 2011 Ford F-250 Super Duty Engines.
Engine Sub Model Notes Position
6.2L V8 King Ranch, Lariat, XL, XLT Curved Radiator Hose Upper
Part Interchange
Duralast E72727
Ford BC34-8B274-AD
Ford BC3Z-8260-E
Ford BC3Z-8260-C
Motorcraft KM5112
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
6.2L V8	King Ranch, Lariat, XL, XLT	Curved Radiator Hose	Upper

Part Name: Radiator Coolant HoseBrand: GatesPart#: 24410

Gates Radiator Coolant Hose 24410 - Upper

Position: Upper

Description:

Radiator Coolant Hose Gates

Condition: New

Fitments
This Part Fits Following 2011 Ford F-250 Super Duty Engines.
Engine Sub Model Notes Fit Notes Position
6.2L V8 King Ranch, Lariat, XL, XLT Molded Coolant Hose Fuel Type: FLEX Upper
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
6.2L V8	King Ranch, Lariat, XL, XLT	Molded Coolant Hose	Fuel Type: FLEX	Upper

Part Name: Radiator Coolant HoseBrand: GatesPart#: 24489

2011 Ford F-250 Super Duty Radiator Coolant Hose ZO 24489

Gates Radiator Coolant Hose 24489 - Lower - Oil Cooler Adapter

Position: Lower - Oil Cooler Adapter

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 21.375
Number of Branches : 2
Inside Diameter 1 : 1.85
Inside Diameter 2 : 1.5
Inside Diameter 3 : .73
Inside Diameter 4 : .73
Inside Diameter 4 : 19

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2011 Ford F-250 Super Duty Engines.
Engine Sub Model Notes Fit Notes Position
6.2L V8 King Ranch, Lariat, XL, XLT Molded Coolant Hose Fuel Type: FLEX Lower - Oil Cooler Adapter
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
6.2L V8	King Ranch, Lariat, XL, XLT	Molded Coolant Hose	Fuel Type: FLEX	Lower - Oil Cooler Adapter

Part Name: Radiator Coolant HoseBrand: DaycoPart#: 72633

2011 Ford F-250 Super Duty Radiator Coolant Hose DY 72633

Dayco Radiator Coolant Hose 72633 - Upper

Position: Upper

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Dual I.D. Hose
Trunk Height : 26 1/2
End 1 Inside Diameter : 2
End 2 Inside Diameter : 2 3/16
Contains Protective Sleeve : N
Contains Heat Shield : Y
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges. This hose has a “quick connect” end assembled onto the hose for fast, convenient installation. With this Dayco® product you avoid the hassle of buying a separate connector and clamp and having to install it before the hose can be used.

Condition: New

Fitments
This Part Fits Following 2011 Ford F-250 Super Duty Engines.
Engine Sub Model Notes Position
6.7L V8 King Ranch, Lariat, XL, XLT w/Quick Connectors - Curved Radiator Hose Upper
Part Interchange
ACDelco 27103X
CARQUEST 23981
Duralast E72633
Ford BC3Z-8260-F
Ford BC3Z-8260-B
Ford BC34-8B274-CC
Gates 23981
Motorcraft KM5043
NAPA 16640
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
6.7L V8	King Ranch, Lariat, XL, XLT	w/Quick Connectors - Curved Radiator Hose	Upper

Part Name: Radiator Coolant HoseBrand: DaycoPart#: 72641

2011 Ford F-250 Super Duty Radiator Coolant Hose DY 72641

Dayco Radiator Coolant Hose 72641 - Lower - Connector To Radiator

Position: Lower - Connector To Radiator

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Branched Hose
Trunk Height : 27
End 1 Inside Diameter : 2 1/16
End 1 Outside Diameter : 2 5/8
End 2 Inside Diameter : 2 7/32
End 2 Outside Diameter : 2 13/16
End 3 Inside Diameter : 3/4
End 3 Outside Diameter : 1 7/32
Contains Protective Sleeve : Y
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose branched assembles are made with knitted reinforcement and all synthetic EPDM rubber construction providing the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges. This hose has a “quick connect” end assembled onto the hose for fast, convenient installation. With this Dayco® product you avoid the hassle of buying a separate connector and clamp and having to install it before the hose can be used. A protective sleeve is made with this hose to protect contact areas against abrasion and heat.

Condition: New

Fitments
This Part Fits Following 2011 Ford F-250 Super Duty Engines.
Engine Sub Model Notes Position
6.7L V8 King Ranch, Lariat, XL, XLT Complete Assembly - Curved Radiator Hose Lower - Connector To Radiator
Part Interchange
Duralast E72641
Ford BC3Z-8286-B
Motorcraft KM5037
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
6.7L V8	King Ranch, Lariat, XL, XLT	Complete Assembly - Curved Radiator Hose	Lower - Connector To Radiator

Part Name: Radiator Coolant HoseBrand: GatesPart#: 23981

2011 Ford F-250 Super Duty Radiator Coolant Hose ZO 23981

Gates Radiator Coolant Hose 23981 - Upper

Position: Upper

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 30.75
Inside Diameter 1 : 2
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2011 Ford F-250 Super Duty Engines.
Engine Sub Model Notes Fit Notes Position
6.7L V8 King Ranch, Lariat, XL, XLT, FX4 Molded Coolant Hose Fuel Type: DIESEL Upper
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
6.7L V8	King Ranch, Lariat, XL, XLT, FX4	Molded Coolant Hose	Fuel Type: DIESEL	Upper

Part Name: Radiator Coolant HoseBrand: GatesPart#: 24415

2011 Ford F-250 Super Duty Radiator Coolant Hose ZO 24415

Gates Radiator Coolant Hose 24415 - Lower - Connector To Engine

Position: Lower - Connector To Engine

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 25
Inside Diameter 1 : 2.03
Inside Diameter 2 : 2.2
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2011 Ford F-250 Super Duty Engines.
Engine Sub Model Notes Fit Notes Position
6.7L V8 King Ranch, Lariat, XL, XLT, FX4 Molded Coolant Hose Fuel Type: DIESEL Lower - Connector To Engine
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
6.7L V8	King Ranch, Lariat, XL, XLT, FX4	Molded Coolant Hose	Fuel Type: DIESEL	Lower - Connector To Engine

Part Name: Radiator Coolant HoseBrand: GatesPart#: 23934

2011 Ford F-250 Super Duty Radiator Coolant Hose ZO 23934

Gates Radiator Coolant Hose 23934 - Lower - Radiator To Connector

Position: Lower - Radiator To Connector

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 30
Number of Branches : 1
Inside Diameter 1 : 2
Inside Diameter 2 : 2
Inside Diameter 3 : .625
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2011 Ford F-250 Super Duty Engines.
Engine Sub Model Notes Fit Notes Position
6.7L V8 King Ranch, Lariat, XL, XLT, FX4 Molded Coolant Hose Fuel Type: DIESEL Lower - Radiator To Connector
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Duralast	E72727
Ford	BC34-8B274-AD
Ford	BC3Z-8260-E
Ford	BC3Z-8260-C
Motorcraft	KM5112

ACDelco	27103X
CARQUEST	23981
Duralast	E72633
Ford	BC3Z-8260-F
Ford	BC3Z-8260-B
Ford	BC34-8B274-CC
Gates	23981
Motorcraft	KM5043
NAPA	16640

Duralast	E72641
Ford	BC3Z-8286-B
Motorcraft	KM5037

My Vehicle:

2011 Ford F-250 Super Duty Radiator Coolant Hose

Gates Radiator Coolant Hose 24396 - Lower - Oil Cooler To Engine

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 24412 - Lower - Radiator To Connector

Description:

Part Specifications:

Features:

Dayco Radiator Coolant Hose 72727 - Upper

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 24410 - Upper

Description:

Gates Radiator Coolant Hose 24489 - Lower - Oil Cooler Adapter

Description:

Part Specifications:

Features:

Dayco Radiator Coolant Hose 72633 - Upper

Description:

Part Specifications:

Features:

Dayco Radiator Coolant Hose 72641 - Lower - Connector To Radiator

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 23981 - Upper

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 24415 - Lower - Connector To Engine

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 23934 - Lower - Radiator To Connector

Description:

Part Specifications:

Features:

Related Belts and Cooling Parts

What Is MAP Price?

What Is MAP Price?

Core Return Process

Parts list X

Part added to your Kart X

Find exact fit part for your car. X