1997 Ford F-250 HD Radiator Coolant Hose

Part Name: Radiator Coolant HoseBrand: DaycoPart#: 71600

Dayco Radiator Coolant Hose 71600 - Lower - Engine To Oil Cooler

Position: Lower - Engine To Oil Cooler

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Dual I.D. Hose
Trunk Height : 3
End 1 Inside Diameter : 1 21/32
End 2 Inside Diameter : 1 25/32
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Condition: New

Fitments
This Part Fits Following 1997 Ford F-250 HD Engines.
Engine Sub Model Notes Position
7.5L V8 XL, XLT Curved Radiator Hose Lower - Engine To Oil Cooler
Part Interchange
ACDelco 20254S
CARQUEST 21909
Duralast A71600
Ford F0TZ-8286-J
Ford F0TA-8B273-MA
Freshstart 928
Gates 21909
Goodyear 61712
Motorcraft KM1938
NAPA 8599
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
7.5L V8	XL, XLT	Curved Radiator Hose	Lower - Engine To Oil Cooler

Part Name: Radiator Coolant HoseBrand: GatesPart#: 21909

1997 Ford F-250 HD Radiator Coolant Hose ZO 21909

Gates Radiator Coolant Hose 21909 - Lower - Pipe To Water Pump

Position: Lower - Pipe To Water Pump

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 3.6
Inside Diameter 1 : 1.68
Inside Diameter 2 : 1.79
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1997 Ford F-250 HD Engines.
Engine Sub Model Notes Fit Notes Position
7.5L V8 XL, XLT Molded Coolant Hose Fuel Type: GAS Lower - Pipe To Water Pump
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
7.5L V8	XL, XLT	Molded Coolant Hose	Fuel Type: GAS	Lower - Pipe To Water Pump

Part Name: Radiator Coolant HoseBrand: DaycoPart#: 71533

1997 Ford F-250 HD Radiator Coolant Hose DY 71533

Dayco Radiator Coolant Hose 71533 - Lower - Radiator To Oil Cooler

Position: Lower - Radiator To Oil Cooler

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 11
End 1 Inside Diameter : 1 3/4
End 2 Inside Diameter : 1 3/4
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Condition: New

Fitments
This Part Fits Following 1997 Ford F-250 HD Engines.
Engine Sub Model Notes Position
7.5L V8 XL, XLT Curved Radiator Hose Lower - Radiator To Oil Cooler

Engine	Sub Model	Notes	Position
7.5L V8	XL, XLT	Curved Radiator Hose	Lower - Radiator To Oil Cooler

Part Interchange

ACDelco	20248S
CARQUEST	21875
Duralast	B71533
Ford	F3TZ-8286-E
Ford	F4TA-8B273-KA
Ford	F5TA-8B273-ACB
Ford	F5TZ-8286-A
Ford	F5TA-8B273-ACC
Ford	F2TA-8B273-XA
Ford	E4TA-8B273-KA
Ford	5TZ-8286A
Ford	F0TA-8B273-DB
Freshstart	903
Gates	21875
Goodyear	61589
Motorcraft	KM2918
NAPA	8565

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: Radiator Coolant HoseBrand: DaycoPart#: 72752

1997 Ford F-250 HD Radiator Coolant Hose DY 72752

Dayco Radiator Coolant Hose 72752 - Upper

Position: Upper

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Dual I.D. Hose
Trunk Height : 17 1/2
End 1 Inside Diameter : 1 1/2
End 1 Outside Diameter : 1 7/8
End 2 Inside Diameter : 1 3/4
End 2 Outside Diameter : 2 3/32
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Condition: New

Fitments
This Part Fits Following 1997 Ford F-250 HD Engines.
Engine Sub Model Notes Position
7.5L V8 XL, XLT w/Single Air Pump - Curved Radiator Hose Upper
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
7.5L V8	XL, XLT	w/Single Air Pump - Curved Radiator Hose	Upper

Part Name: Radiator Coolant HoseBrand: GatesPart#: 21875

1997 Ford F-250 HD Radiator Coolant Hose ZO 21875

Gates Radiator Coolant Hose 21875 - Lower - Pipe To Radiator

Position: Lower - Pipe To Radiator

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 15.4
Inside Diameter 1 : 1.75
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1997 Ford F-250 HD Engines.
Engine Sub Model Notes Fit Notes Position
7.5L V8 XL, XLT Molded Coolant Hose Fuel Type: GAS Lower - Pipe To Radiator
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
7.5L V8	XL, XLT	Molded Coolant Hose	Fuel Type: GAS	Lower - Pipe To Radiator

Part Name: Radiator Coolant HoseBrand: DaycoPart#: 71317

1997 Ford F-250 HD Radiator Coolant Hose DY 71317

Dayco Radiator Coolant Hose 71317 - Upper

Position: Upper

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Dual I.D. Hose
Trunk Height : 20
End 1 Inside Diameter : 1 1/2
End 2 Inside Diameter : 1 3/4
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Condition: New

Fitments
This Part Fits Following 1997 Ford F-250 HD Engines.
Engine Sub Model Notes Position
5.8L V8 XL, XLT Optional Replacement - Curved Radiator Hose Upper

Engine	Sub Model	Notes	Position
5.8L V8	XL, XLT	Optional Replacement - Curved Radiator Hose	Upper

Part Interchange

ACDelco	26140X
ACDelco	26276X
Atlas	MC166
CARQUEST	22142
CARQUEST	21631
Duralast	E71317
Ford	F1TA-8B274-TA
Ford	F0TZ-8260-E
Ford	E8TA-8B274-HA
Ford	F2TZ-8260-C
Ford	F5TA-8B274-YD
Ford	F5TZ-8260-B
Ford	E7TZ-8260-A
Ford	F5TA-8B274-YC
Ford	F3TZ-8260-D
Ford	E7TA-8B274-LD
Ford	E7TA-8B274-LB
Freshstart	382
Gates	21631
Gates	22142
Goodyear	62482
Goodyear	61460
MasterPro	21631
Motorcraft	KM2455
Motorcraft	KM2921
Motorcraft	KM2360
Motorcraft	KM1629
Motorcraft	KM1880
NAPA	8383
NAPA	8349
NAPA	8809

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: Radiator Coolant HoseBrand: GatesPart#: 21668

1997 Ford F-250 HD Radiator Coolant Hose ZO 21668

Gates Radiator Coolant Hose 21668 - Upper

Position: Upper

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 19.7
Inside Diameter 1 : 1.5
Inside Diameter 2 : 1.75
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1997 Ford F-250 HD Engines.
Engine Sub Model Notes Fit Notes Position
7.5L V8 XL, XLT Molded Coolant Hose Fuel Type: GAS Upper
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
7.5L V8	XL, XLT	Molded Coolant Hose	Fuel Type: GAS	Upper

Part Name: Radiator Coolant HoseBrand: DaycoPart#: 71874

1997 Ford F-250 HD Radiator Coolant Hose DY 71874

Dayco Radiator Coolant Hose 71874 - Upper

Position: Upper

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Dual I.D. Hose
Trunk Height : 13 1/2
End 1 Inside Diameter : 1 11/16
End 2 Inside Diameter : 1 3/4
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Condition: New

Fitments
This Part Fits Following 1997 Ford F-250 HD Engines.
Engine Sub Model Notes Position
7.3L V8 XL, XLT Curved Radiator Hose Upper
Part Interchange
ACDelco 22309M
CARQUEST 22158
Duralast C71874
Ford F5TA-8B274-RH
Ford 5TA-8B274RH
Ford F5TZ-8260-E
Ford F6TA-8B274-FA
Gates 22158
Motorcraft KM2989
NAPA 8825
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
7.3L V8	XL, XLT	Curved Radiator Hose	Upper

Part Name: Radiator Coolant HoseBrand: DaycoPart#: 71876

1997 Ford F-250 HD Radiator Coolant Hose DY 71876

Dayco Radiator Coolant Hose 71876 - Lower - Tee To Reservoir

Position: Lower - Tee To Reservoir

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 26 1/4
End 1 Inside Diameter : 15/16
End 2 Inside Diameter : 15/16
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Condition: New

Fitments
This Part Fits Following 1997 Ford F-250 HD Engines.
Engine Sub Model Notes Position
7.3L V8 XL, XLT Curved Radiator Hose Lower - Tee To Reservoir
Part Interchange
ACDelco 26309X
CARQUEST 22217
Duralast E71876
Ford F5TA-8C351-AE
Freshstart 1104
Gates 22217
Goodyear 62156
NAPA 8859
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
7.3L V8	XL, XLT	Curved Radiator Hose	Lower - Tee To Reservoir

Part Name: Radiator Coolant HoseBrand: GatesPart#: 22217

1997 Ford F-250 HD Radiator Coolant Hose ZO 22217

Gates Radiator Coolant Hose 22217 - Lower - Reservoir To Tee

Position: Lower - Reservoir To Tee

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 36.7
Inside Diameter 1 : .95
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1997 Ford F-250 HD Engines.
Engine Sub Model Notes Fit Notes Position
7.3L V8 XL, XLT Molded Coolant Hose Fuel Type: DIESEL Lower - Reservoir To Tee
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
7.3L V8	XL, XLT	Molded Coolant Hose	Fuel Type: DIESEL	Lower - Reservoir To Tee

Part Name: Radiator Coolant HoseBrand: DaycoPart#: 81261

1997 Ford F-250 HD Radiator Coolant Hose DY 81261

Dayco Radiator Coolant Hose 81261 - Upper

Position: Upper

Description:

FLEX RADIATOR HOSE STANDARD DAYCO

Features:

Precision molded in standard lengths, Dayco’s Flex Radiator Hose is designed to replace straight or molded radiator hoses. The knitted reinforcement and synthetic EPDM construction meets SAE J20R4, Class D-2 requirements. This hose is designed to prevent splitting, ballooning, and elongation; and, resists ozone and other detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). The corrugations provide excellent hose flexibility without flattening or collapse. This Flex Radiator Hose is another Dayco® product proudly made in the USA. Note: This hose is NOT suitable for fuel or oil transfer.

Condition: New

Fitments
This Part Fits Following 1997 Ford F-250 HD Engines.
Engine Sub Model Notes Position
7.5L V8 XL, XLT Flex Radiator Hose Upper

Engine	Sub Model	Notes	Position
7.5L V8	XL, XLT	Flex Radiator Hose	Upper

Part Interchange

ACDelco	31647
Atlas	533
AutoZone	C6424
Autopar	RH21
Bowes	1220S
CARQUEST	25530
Chief	C6424
Conoco	FH83
Duralast	81261
Ford	C2RZ-8260-AA
Freshstart	1318
Gates	26424
Gates	25530
General Motors	3845440
General Motors	22525351
General Motors	3845441
General Motors	3865765
Goodyear	52420
Gulf	7620
Hyster	155467
Mobil	9M19
Mopar	BH618
Motorcraft	KBC200
NAPA	FM75
Pirelli	620
Texaco	1318
Texaco	129
Uniroyal	7620
Uniroyal	FC533
V&W	1318

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: Radiator Coolant HoseBrand: GatesPart#: 22158

1997 Ford F-250 HD Radiator Coolant Hose ZO 22158

Gates Radiator Coolant Hose 22158 - Upper

Position: Upper

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 20.3
Inside Diameter 1 : 1.72
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1997 Ford F-250 HD Engines.
Engine Sub Model Notes Fit Notes Position
7.3L V8 XL, XLT Molded Coolant Hose Fuel Type: DIESEL Upper
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
7.3L V8	XL, XLT	Molded Coolant Hose	Fuel Type: DIESEL	Upper

Part Name: Radiator Coolant HoseBrand: GatesPart#: 22142

1997 Ford F-250 HD Radiator Coolant Hose ZO 22142

Gates Radiator Coolant Hose 22142 - Upper

Position: Upper

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 32.7
Inside Diameter 1 : 1.47
Inside Diameter 2 : 1.72
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1997 Ford F-250 HD Engines.
Engine Sub Model Notes Fit Notes Position
5.8L V8 XL, XLT Molded Coolant Hose Fuel Type: GAS Upper
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
5.8L V8	XL, XLT	Molded Coolant Hose	Fuel Type: GAS	Upper

Part Name: Radiator Coolant HoseBrand: GatesPart#: 25530

1997 Ford F-250 HD Radiator Coolant Hose ZO 25530

Gates Radiator Coolant Hose 25530 - Upper

Position: Upper

Description:

Flexible Coolant Hose Standard

Part Specifications:

Centerline Length : 20
Inside Diameter 1 : 1.5
Inside Diameter 2 : 1.75

Features:

Gates Vulco-Flex(R) II hose will bend in almost any direction. It easily replicates the angles and planes of a wide variety of expensive original equipment coolant hose, for quick, easy replacement.
- Improved sealing surface for greater leak resistance and increased flexibility for easier installation.
- Heat and ozone resistant cover.
- Rated for SAE 20R5 Class D-2 performance.
- High temperature rating up to +257 Deg. F (+125 Deg. C).
Note: Gates recommends replacing clamps each time a new coolant hose is installed.
Caution: Do not use for fuel or oil transfer applications.
Gates Powering Progess

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 1997 Ford F-250 HD Engines.
Engine Sub Model Notes Fit Notes Position
7.5L V8 XL, XLT Flexible Coolant Hose (Standard) Fuel Type: GAS Upper
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
7.5L V8	XL, XLT	Flexible Coolant Hose (Standard)	Fuel Type: GAS	Upper

Part Name: Radiator Coolant HoseBrand: DaycoPart#: 71318

1997 Ford F-250 HD Radiator Coolant Hose DY 71318

Dayco Radiator Coolant Hose 71318 - Upper

Position: Upper

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Dual I.D. Hose
Trunk Height : 18 1/2
End 1 Inside Diameter : 1 1/2
End 2 Inside Diameter : 1 3/4
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Condition: New

Fitments
This Part Fits Following 1997 Ford F-250 HD Engines.
Engine Sub Model Notes Position
7.5L V8 XL, XLT w/Dual Air Pump - Curved Radiator Hose Upper

Engine	Sub Model	Notes	Position
7.5L V8	XL, XLT	w/Dual Air Pump - Curved Radiator Hose	Upper

Part Interchange

ACDelco	24216L
ACDelco	24462L
CARQUEST	21668
Duralast	E71318
Ford	F0TZ-8260-C
Ford	E8TZ-8260-C
Ford	E7TA-8B274-PB
Ford	F1TA-8B274-PA
Ford	E8TA-8B274-EA
Ford	F2TZ-8260-D
Ford	F5TZ-8260-A
Ford	F5TA-8B274-VC
Ford	F5TA-8B274-VB
Ford	E6TA-8B274-GA
Ford	F1TA-8B274-PB
Ford	E7TA-8B274-PA
Ford	E5TA-8B274-MB
Ford	E5TZ-8260-H
Ford	E5TA-8B274-RF
Ford	E5TZ-8260-D
Freshstart	399
Gates	21668
Gates	22655
Goodyear	61406
Goodyear	62161
Motorcraft	KM1711
Motorcraft	KM1878
Motorcraft	KM2361
Motorcraft	KM1560
Motorcraft	KM1503
Motorcraft	KM1526
Motorcraft	KM2917
NAPA	8382
NAPA	9288
Pirelli	41406

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: Radiator Coolant HoseBrand: DaycoPart#: 71732

1997 Ford F-250 HD Radiator Coolant Hose DY 71732

Dayco Radiator Coolant Hose 71732 - Lower

Position: Lower

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 19
End 1 Inside Diameter : 1 23/32
End 2 Inside Diameter : 1 23/32
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Condition: New

Fitments
This Part Fits Following 1997 Ford F-250 HD Engines.
Engine Sub Model Notes Position
5.8L V8 XL, XLT Curved Radiator Hose Lower

Engine	Sub Model	Notes	Position
5.8L V8	XL, XLT	Curved Radiator Hose	Lower

Part Interchange

ACDelco	22375M
ACDelco	24318L
CARQUEST	22541
CARQUEST	22143
Duralast	D71732
Ford	E4TA-8B273-RA
Ford	F4TA-8B273-RA
Ford	F4TZ-8286-C
Ford	F5TA-8B273-AAD
Ford	F5TZ-8286-C
Ford	F5TA-8B273-AAC
Freshstart	1034
Gates	22143
Gates	22541
Goodyear	62084
Motorcraft	KM2924
Motorcraft	KM2844
NAPA	9174
NAPA	8810

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: Radiator Coolant HoseBrand: GatesPart#: 22143

1997 Ford F-250 HD Radiator Coolant Hose ZO 22143

Gates Radiator Coolant Hose 22143 - Lower

Position: Lower

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 21.1
Inside Diameter 1 : 1.72
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1997 Ford F-250 HD Engines.
Engine Sub Model Notes Fit Notes Position
5.8L V8 XL, XLT W/Eng. Oil Cooler - Molded Coolant Hose Fuel Type: GAS Lower
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
5.8L V8	XL, XLT	W/Eng. Oil Cooler - Molded Coolant Hose	Fuel Type: GAS	Lower

Part Name: Radiator Coolant HoseBrand: GatesPart#: 22216

1997 Ford F-250 HD Radiator Coolant Hose ZO 22216

Gates Radiator Coolant Hose 22216 - Lower - Radiator To Water Pump

Position: Lower - Radiator To Water Pump

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 26
Number of Branches : 1
Inside Diameter 1 : 1.72
Inside Diameter 2 : 1.94
Inside Diameter 3 : .92
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1997 Ford F-250 HD Engines.
Engine Sub Model Notes Fit Notes Position
7.3L V8 XL, XLT Molded Coolant Hose Fuel Type: DIESEL Lower - Radiator To Water Pump
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
7.3L V8	XL, XLT	Molded Coolant Hose	Fuel Type: DIESEL	Lower - Radiator To Water Pump

Part Name: Radiator Coolant HoseBrand: DaycoPart#: 71875

1997 Ford F-250 HD Radiator Coolant Hose DY 71875

Dayco Radiator Coolant Hose 71875 - Lower

Position: Lower

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Branched Hose
Trunk Height : 21 1/2
End 1 Inside Diameter : 1 3/4
End 1 Outside Diameter : 2 1/8
End 2 Inside Diameter : 1 15/16
End 2 Outside Diameter : 2 5/16
End 3 Inside Diameter : 1
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Condition: New

Fitments
This Part Fits Following 1997 Ford F-250 HD Engines.
Engine Sub Model Notes Position
7.3L V8 XL, XLT Curved Radiator Hose Lower
Part Interchange
ACDelco 26308X
CARQUEST 22216
Duralast E71875
Ford F5TA-8B273-RH
Ford F5TZ-8286-Z
Ford F5TZ-8286-G
Freshstart 1104
Gates 22216
Goodyear 62156
Motorcraft KM2990
NAPA 8857
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
7.3L V8	XL, XLT	Curved Radiator Hose	Lower

Part Name: Radiator Coolant HoseBrand: DaycoPart#: 71735

1997 Ford F-250 HD Radiator Coolant Hose DY 71735

Dayco Radiator Coolant Hose 71735 - Lower - Oil Cooler Adapter

Position: Lower - Oil Cooler Adapter

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Branched Hose
Trunk Height : 9
End 1 Inside Diameter : 1 11/16
End 1 Outside Diameter : 2 1/16
End 2 Inside Diameter : 1 3/4
End 2 Outside Diameter : 2 1/8
End 3 Inside Diameter : 5/8
End 4 Inside Diameter : 5/8
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Condition: New

Fitments
This Part Fits Following 1997 Ford F-250 HD Engines.
Engine Sub Model Notes Position
5.8L V8 XL, XLT Curved Radiator Hose Lower - Oil Cooler Adapter
Part Interchange
ACDelco 20380S
CARQUEST 22401
Duralast B71735
Ford F4TE-6K741-DB
Ford F4TE-6K741-EA
Ford F4TE-6K741-A
Ford F4TZ-6K741-A
Gates 22401
Goodyear 62843
NAPA 9034
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
5.8L V8	XL, XLT	Curved Radiator Hose	Lower - Oil Cooler Adapter

Part Name: Radiator Coolant HoseBrand: GatesPart#: 22401

1997 Ford F-250 HD Radiator Coolant Hose ZO 22401

Gates Radiator Coolant Hose 22401 - Lower - Oil Cooler Adapter

Position: Lower - Oil Cooler Adapter

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 3.75
Number of Branches : 2
Inside Diameter 1 : 1.7
Inside Diameter 2 : .625
Inside Diameter 3 : .625
Inside Diameter 4 : 1.75
Inside Diameter 4 : 44
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1997 Ford F-250 HD Engines.
Engine Sub Model Notes Fit Notes Position
5.8L V8 XL, XLT W/O SVT Pkg. - Molded Coolant Hose Fuel Type: GAS Lower - Oil Cooler Adapter
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
5.8L V8	XL, XLT	W/O SVT Pkg. - Molded Coolant Hose	Fuel Type: GAS	Lower - Oil Cooler Adapter

Part Name: Radiator Coolant HoseBrand: GatesPart#: 22402

1997 Ford F-250 HD Radiator Coolant Hose ZO 22402

Gates Radiator Coolant Hose 22402 - Lower - Oil Cooler Adapter

Position: Lower - Oil Cooler Adapter

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 4.13
Number of Branches : 2
Inside Diameter 1 : 1.7
Inside Diameter 2 : .625
Inside Diameter 3 : .625
Inside Diameter 4 : 1.75
Inside Diameter 4 : 44
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1997 Ford F-250 HD Engines.
Engine Sub Model Notes Fit Notes Position
5.8L V8 XL, XLT W/SVT Pkg. - Molded Coolant Hose Fuel Type: GAS Lower - Oil Cooler Adapter
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

ACDelco	20254S
CARQUEST	21909
Duralast	A71600
Ford	F0TZ-8286-J
Ford	F0TA-8B273-MA
Freshstart	928
Gates	21909
Goodyear	61712
Motorcraft	KM1938
NAPA	8599

ACDelco	22309M
CARQUEST	22158
Duralast	C71874
Ford	F5TA-8B274-RH
Ford	5TA-8B274RH
Ford	F5TZ-8260-E
Ford	F6TA-8B274-FA
Gates	22158
Motorcraft	KM2989
NAPA	8825

ACDelco	26309X
CARQUEST	22217
Duralast	E71876
Ford	F5TA-8C351-AE
Freshstart	1104
Gates	22217
Goodyear	62156
NAPA	8859

ACDelco	26308X
CARQUEST	22216
Duralast	E71875
Ford	F5TA-8B273-RH
Ford	F5TZ-8286-Z
Ford	F5TZ-8286-G
Freshstart	1104
Gates	22216
Goodyear	62156
Motorcraft	KM2990
NAPA	8857

ACDelco	20380S
CARQUEST	22401
Duralast	B71735
Ford	F4TE-6K741-DB
Ford	F4TE-6K741-EA
Ford	F4TE-6K741-A
Ford	F4TZ-6K741-A
Gates	22401
Goodyear	62843
NAPA	9034

My Vehicle:

1997 Ford F-250 HD Radiator Coolant Hose

Dayco Radiator Coolant Hose 71600 - Lower - Engine To Oil Cooler

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 21909 - Lower - Pipe To Water Pump

Description:

Part Specifications:

Features:

Dayco Radiator Coolant Hose 71533 - Lower - Radiator To Oil Cooler

Description:

Part Specifications:

Features:

Dayco Radiator Coolant Hose 72752 - Upper

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 21875 - Lower - Pipe To Radiator

Description:

Part Specifications:

Features:

Dayco Radiator Coolant Hose 71317 - Upper

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 21668 - Upper

Description:

Part Specifications:

Features:

Dayco Radiator Coolant Hose 71874 - Upper

Description:

Part Specifications:

Features:

Dayco Radiator Coolant Hose 71876 - Lower - Tee To Reservoir

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 22217 - Lower - Reservoir To Tee

Description:

Part Specifications:

Features:

Dayco Radiator Coolant Hose 81261 - Upper

Description:

Features:

Gates Radiator Coolant Hose 22158 - Upper

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 22142 - Upper

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 25530 - Upper

Description:

Part Specifications:

Features:

Dayco Radiator Coolant Hose 71318 - Upper

Description:

Part Specifications:

Features:

Dayco Radiator Coolant Hose 71732 - Lower

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 22143 - Lower

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 22216 - Lower - Radiator To Water Pump

Description:

Part Specifications:

Features:

Dayco Radiator Coolant Hose 71875 - Lower

Description:

Part Specifications:

Features:

Dayco Radiator Coolant Hose 71735 - Lower - Oil Cooler Adapter

Description:

Part Specifications: