2004 Ford F-150 Heritage HVAC Heater Hose

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87617

Dayco HVAC Heater Hose 87617 - Heater Outlet

Position: Heater Outlet

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 7 3/4
End 1 Inside Diameter : 5/8
End 1 Outside Diameter : 15/16
End 2 Inside Diameter : 5/8
End 2 Outside Diameter : 15/16
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 2004 Ford F-150 Heritage Engines.
Engine Sub Model Notes Fit Notes Position
5.4L V8 SVT Lightning, XL, XLT Reuse OEM Connector - Small I.D. Heater Hose Fuel Type: CNG, BI-FUEL Heater Outlet

Engine	Sub Model	Notes	Fit Notes	Position
5.4L V8	SVT Lightning, XL, XLT	Reuse OEM Connector - Small I.D. Heater Hose	Fuel Type: CNG, BI-FUEL	Heater Outlet

Part Interchange

ACDelco	14075S
CARQUEST	18700
Chrysler	4462639
Chrysler	4540021
Duralast	C87617
Ford	9L3Z-18472-B
Ford	4L34-18K580-BB
Freshstart	4375
Gates	18700
General Motors	97333410
Goodyear	63110
Motorcraft	KH515
NAPA	10700
NAPA	8613
V&W	303617

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 28469

2004 Ford F-150 Heritage HVAC Heater Hose ZO 28469

Gates HVAC Heater Hose 28469 - Heater To Water Pump Pipe

Position: Heater To Water Pump Pipe

Description:

90 Deg Molded Heater Hose

Part Specifications:

Centerline Length : 26
Arm Length 1 : 8
Arm Length 1 : 203.2
Arm Length 2 : 18
Arm Length 2 : 457.2
Inside Diameter 1 : .625
Angle : 90

Features:

Specially designed for difficult heater hose applications requiring sharp 90 degree bends in the hose. Eliminates the need for extensive inventory of OE type curved heater hose. Just 22 sizes handle thousands of applications.
- Engineered to resist electrochemical degradation the leading cause of hose failure.
- Resists water permeation.
- Similar to heater SAE 20R3 Type EC Class D-2.
- Use with heater hose connectors and bulk heater hose for virtually complete molded heater hose coverage.
- Temperature Rating: -40F to 275F (-40C to 135C).
Caution: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 2004 Ford F-150 Heritage Engines.
Engine Sub Model Notes Fit Notes Position
4.2L V6 XL, XLT Cut to fit - 90º Molded Heater Hose Fuel Type: GAS Heater To Water Pump Pipe
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
4.2L V6	XL, XLT	Cut to fit - 90º Molded Heater Hose	Fuel Type: GAS	Heater To Water Pump Pipe

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87864

2004 Ford F-150 Heritage HVAC Heater Hose DY 87864

Dayco HVAC Heater Hose 87864 - Heater Inlet

Position: Heater Inlet

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 9
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 2004 Ford F-150 Heritage Engines.
Engine Sub Model Notes Position
5.4L V8 SVT Lightning, XL, XLT Small I.D. Heater Hose Heater Inlet
Part Interchange
ACDelco 14257S
CARQUEST 19193
Duralast C87864
Ford XL3H-18K579-AA
Gates 19193
General Motors 89019080
Goodyear 63991
NAPA 11193
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
5.4L V8	SVT Lightning, XL, XLT	Small I.D. Heater Hose	Heater Inlet

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87756

2004 Ford F-150 Heritage HVAC Heater Hose DY 87756

Dayco HVAC Heater Hose 87756 - Heater Outlet

Position: Heater Outlet

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 8
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose and provide long, reliable service. Made with the same bends and routing as the OEM assembly, this hose is designed to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. This hose has a “quick connect” end assembled onto the hose for fast, convenient installation. With this Dayco® product you avoid the hassle of buying a separate connector and clamp and having to install it before the hose can be used.

Condition: New

Fitments
This Part Fits Following 2004 Ford F-150 Heritage Engines.
Engine Sub Model Notes Position
5.4L V8 SVT Lightning, XL, XLT Small I.D. Heater Hose Heater Outlet
Part Interchange
ACDelco 14257S
CARQUEST 19193
Duralast C87756
Ford F65Z-18472-BB
Ford F65H-18K580-BA
Ford F65H-18K579-BA
Gates 19193
NAPA 11193
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
5.4L V8	SVT Lightning, XL, XLT	Small I.D. Heater Hose	Heater Outlet

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87754

2004 Ford F-150 Heritage HVAC Heater Hose DY 87754

Dayco HVAC Heater Hose 87754 - Heater Outlet

Position: Heater Outlet

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 19
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose and provide long, reliable service. Made with the same bends and routing as the OEM assembly, this hose is designed to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. This hose has a “quick connect” end assembled onto the hose for fast, convenient installation. With this Dayco® product you avoid the hassle of buying a separate connector and clamp and having to install it before the hose can be used.

Condition: New

Fitments
This Part Fits Following 2004 Ford F-150 Heritage Engines.
Engine Sub Model Notes Position
4.2L V6 XL, XLT Small I.D. Heater Hose Heater Outlet
Part Interchange
ACDelco 18150L
CARQUEST 28469
Duralast E87754
Ford F65H-18K579-AB
Ford F65Z-18472-AB
Ford 2L34-18K580-BB
Ford F65H-18K580-AB
Gates 28469
Goodyear 63523
NAPA 9810
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
4.2L V6	XL, XLT	Small I.D. Heater Hose	Heater Outlet

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87862

2004 Ford F-150 Heritage HVAC Heater Hose DY 87862

Dayco HVAC Heater Hose 87862 - Heater Inlet

Position: Heater Inlet

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Dual I.D. Hose
Trunk Height : 20 1/2
End 1 Inside Diameter : 5/8
End 1 Outside Diameter : 1
End 2 Inside Diameter : 3/4
End 2 Outside Diameter : 1 3/32
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 2004 Ford F-150 Heritage Engines.
Engine Sub Model Notes Position
4.2L V6 XL, XLT Small I.D. Heater Hose Heater Inlet
Part Interchange
Duralast E87862
Ford 3L34-18K579-AA
Goodyear 63522
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
4.2L V6	XL, XLT	Small I.D. Heater Hose	Heater Inlet

Part Name: HVAC Heater HoseBrand: GatesPart#: 19219

2004 Ford F-150 Heritage HVAC Heater Hose ZO 19219

Gates HVAC Heater Hose 19219 - Heater - Left Side

Position: Heater - Left Side

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 20.9
Inside Diameter 1 : .63
Inside Diameter 2 : .94
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2004 Ford F-150 Heritage Engines.
Engine Sub Model Notes Fit Notes Position
5.4L V8 SVT Lightning, XL, XLT Molded Heater Hose Fuel Type: BI-FUEL, CNG, GAS Heater - Left Side
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
5.4L V8	SVT Lightning, XL, XLT	Molded Heater Hose	Fuel Type: BI-FUEL, CNG, GAS	Heater - Left Side

Part Name: HVAC Heater HoseBrand: GatesPart#: 23655

2004 Ford F-150 Heritage HVAC Heater Hose ZO 23655

Gates HVAC Heater Hose 23655 - Heater Outlet

Position: Heater Outlet

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 18.3
Number of Branches : 1
Inside Diameter 1 : .61
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2004 Ford F-150 Heritage Engines.
Engine Sub Model Notes Fit Notes Position
4.6L V8 XL, XLT Molded Coolant Hose Fuel Type: GAS Heater Outlet
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
4.6L V8	XL, XLT	Molded Coolant Hose	Fuel Type: GAS	Heater Outlet

Part Name: HVAC Heater HoseBrand: GatesPart#: 24780

2004 Ford F-150 Heritage HVAC Heater Hose ZO 24780

Gates HVAC Heater Hose 24780

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 6.75
Inside Diameter 1 : .625
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments

This Part Fits Following 2004 Ford F-150 Heritage Engines.

Engine	Sub Model	Notes	Fit Notes
4.6L V8	XL, XLT	Heater - Outlet Extension - Molded Coolant Hose	Fuel Type: GAS
5.4L V8	SVT Lightning, XL, XLT	Heater - Outlet Extension - Molded Coolant Hose	Fuel Type: BI-FUEL, CNG, GAS

Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 19114

2004 Ford F-150 Heritage HVAC Heater Hose ZO 19114

Gates HVAC Heater Hose 19114 - Heater To Thermostat

Position: Heater To Thermostat

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 35.91
Inside Diameter 1 : .63
Inside Diameter 2 : .74
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2004 Ford F-150 Heritage Engines.
Engine Sub Model Notes Fit Notes Position
4.2L V6 XL, XLT Re-use existing flow restrictor. - Molded Heater Hose Fuel Type: GAS Heater To Thermostat
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
4.2L V6	XL, XLT	Re-use existing flow restrictor. - Molded Heater Hose	Fuel Type: GAS	Heater To Thermostat

Part Name: HVAC Heater HoseBrand: GatesPart#: 28407

2004 Ford F-150 Heritage HVAC Heater Hose ZO 28407

Gates HVAC Heater Hose 28407 - PCV Valve Heater To Intake Manifold, Intake Manifold PCV Heater To PCV Valve Heater, Water Pump Pipe To Intake Manifold PCV Heater

Position: PCV Valve Heater To Intake Manifold, Intake Manifold PCV Heater To PCV Valve Heater, Water Pump Pipe To Intake Manifold PCV Heater

Description:

Straight Heater Hose Standard

Part Specifications:

Centerline Length : 50
Centerline Length : 15.24
Centerline Length : 600
Inside Diameter 1 : .25
Working Pressure : 60
Weight Per Length : 6 lbs./Carton

Features:

Premium hose constructed for long service life.
- Unaffected by most coolants and non-oil based coolant additives and by high cooling system pressures
- Good resistance to high temperatures for extended periods of time
- Similar to SAE 20R3 Class D-2
- Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments

This Part Fits Following 2004 Ford F-150 Heritage Engines.

Engine	Sub Model	Notes	Fit Notes	Position
4.2L V6	XL, XLT	Cut to Length, 12" - Straight Heater Hose (Standard)	Fuel Type: GAS	PCV Valve Heater To Intake Manifold, Intake Manifold PCV Heater To PCV Valve Heater, Water Pump Pipe To Intake Manifold PCV Heater

Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87958

2004 Ford F-150 Heritage HVAC Heater Hose DY 87958

Dayco HVAC Heater Hose 87958 - Heater Inlet

Position: Heater Inlet

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Dual I.D. Hose
Trunk Height : 21 1/2
End 1 Inside Diameter : 5/8
End 1 Outside Diameter : 1 3/32
End 2 Inside Diameter : 3/4
End 2 Outside Diameter : 1 3/32
Contains Protective Sleeve : Y
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

This Dayco® Molded Heater Hose branched assembly is designed to replace OEM coolant hose and provide long, reliable service. Made with the same bends and routing as the OEM assembly, this hose is designed to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. This hose is made with a protective sleeve that protects contact areas against abrasion and heat.

Condition: New

Fitments
This Part Fits Following 2004 Ford F-150 Heritage Engines.
Engine Sub Model Notes Fit Notes Position
5.4L V8 SVT Lightning, XL, XLT Small I.D. Heater Hose Fuel Type: CNG, BI-FUEL Heater Inlet
Part Interchange
Duralast E87958
Ford 4L3Z-18472-BA
Ford 9L3Z-18472-F
Ford 9L34-18K579-BB
Ford 5L3Z-18472-E
Motorcraft KH529
Motorcraft KH334
Motorcraft KH441
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
5.4L V8	SVT Lightning, XL, XLT	Small I.D. Heater Hose	Fuel Type: CNG, BI-FUEL	Heater Inlet

Part Name: HVAC Heater HoseBrand: GatesPart#: 28409

2004 Ford F-150 Heritage HVAC Heater Hose ZO 28409

Gates HVAC Heater Hose 28409 - Reservoir To Radiator

Position: Reservoir To Radiator

Description:

Straight Heater Hose Standard

Part Specifications:

Centerline Length : 50
Centerline Length : 15.24
Centerline Length : 600
Inside Diameter 1 : .375
Working Pressure : 60
Weight Per Length : 8.25 lbs./Carton

Features:

Premium hose constructed for long service life.
- Unaffected by most coolants and non-oil based coolant additives and by high cooling system pressures
- Good resistance to high temperatures for extended periods of time
- Similar to SAE 20R3 Class D-2
- Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 2004 Ford F-150 Heritage Engines.
Engine Sub Model Notes Fit Notes Position
4.2L V6 XL, XLT Cut to Length, 11" - Straight Heater Hose (Standard) Fuel Type: GAS Reservoir To Radiator
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
4.2L V6	XL, XLT	Cut to Length, 11" - Straight Heater Hose (Standard)	Fuel Type: GAS	Reservoir To Radiator

Part Name: HVAC Heater HoseBrand: GatesPart#: 24782

Gates HVAC Heater Hose 24782 - Heater Inlet

Position: Heater Inlet

Description:

HVAC Heater Hose Gates

Condition: New

Fitments
This Part Fits Following 2004 Ford F-150 Heritage Engines.
Engine Sub Model Notes Fit Notes Position
4.6L V8 XL, XLT Molded Coolant Hose Fuel Type: GAS Heater Inlet
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

ACDelco	14257S
CARQUEST	19193
Duralast	C87864
Ford	XL3H-18K579-AA
Gates	19193
General Motors	89019080
Goodyear	63991
NAPA	11193

ACDelco	18150L
CARQUEST	28469
Duralast	E87754
Ford	F65H-18K579-AB
Ford	F65Z-18472-AB
Ford	2L34-18K580-BB
Ford	F65H-18K580-AB
Gates	28469
Goodyear	63523
NAPA	9810

Duralast	E87958
Ford	4L3Z-18472-BA
Ford	9L3Z-18472-F
Ford	9L34-18K579-BB
Ford	5L3Z-18472-E
Motorcraft	KH529
Motorcraft	KH334
Motorcraft	KH441

Duralast	E87862
Ford	3L34-18K579-AA
Goodyear	63522

My Vehicle:

2004 Ford F-150 Heritage HVAC Heater Hose

Dayco HVAC Heater Hose 87617 - Heater Outlet

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28469 - Heater To Water Pump Pipe

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87864 - Heater Inlet

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87756 - Heater Outlet

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87754 - Heater Outlet

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87862 - Heater Inlet

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19219 - Heater - Left Side

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 23655 - Heater Outlet

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 24780

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19114 - Heater To Thermostat

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28407 - PCV Valve Heater To Intake Manifold, Intake Manifold PCV Heater To PCV Valve Heater, Water Pump Pipe To Intake Manifold PCV Heater

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87958 - Heater Inlet

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28409 - Reservoir To Radiator

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 24782 - Heater Inlet

Description:

Related HVAC Parts

What Is MAP Price?

What Is MAP Price?

Core Return Process

Parts list X

Part added to your Kart X

Find exact fit part for your car. X