2000 Ford E-350 Super Duty HVAC Heater Hose

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87666

Dayco HVAC Heater Hose 87666 - Heater To Tee-2

Position: Heater To Tee-2

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 9
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 2000 Ford E-350 Super Duty Engines.
Engine Sub Model Notes Position
5.4L V8 Base, XL Cut to Fit - w/Aux. Heater - Small I.D. Heater Hose Heater To Tee-2
6.8L V10 Base, XL Cut to Fit - w/Aux. Heater - Small I.D. Heater Hose Heater To Tee-2
Part Interchange
ACDelco 14111S
ACDelco 14172S
Duralast B87666
Freshstart 63125
Gates 19077
Gates 18805
General Motors 10135301
Goodyear 63125
NAPA 10805
NAPA 11077
V&W 303666
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
5.4L V8	Base, XL	Cut to Fit - w/Aux. Heater - Small I.D. Heater Hose	Heater To Tee-2
6.8L V10	Base, XL	Cut to Fit - w/Aux. Heater - Small I.D. Heater Hose	Heater To Tee-2

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87848

2000 Ford E-350 Super Duty HVAC Heater Hose DY 87848

Dayco HVAC Heater Hose 87848 - Tee-2 To Pipe

Position: Tee-2 To Pipe

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 28
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 2000 Ford E-350 Super Duty Engines.
Engine Sub Model Notes Position
5.4L V8 Base, XL Cut to Fit - w/Aux. Heater - Small I.D. Heater Hose Tee-2 To Pipe
6.8L V10 Base, XL Cut to Fit - w/Aux. Heater - Small I.D. Heater Hose Tee-2 To Pipe
Part Interchange
ACDelco 18074L
CARQUEST 18914
Duralast E87848
Ford F7UZ-18472-HA
Gates 18914
General Motors 15145587
General Motors 15647934
General Motors 15763368
Goodyear 64133
NAPA 10914
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
5.4L V8	Base, XL	Cut to Fit - w/Aux. Heater - Small I.D. Heater Hose	Tee-2 To Pipe
6.8L V10	Base, XL	Cut to Fit - w/Aux. Heater - Small I.D. Heater Hose	Tee-2 To Pipe

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87691

2000 Ford E-350 Super Duty HVAC Heater Hose DY 87691

Dayco HVAC Heater Hose 87691 - Heater To Engine

Position: Heater To Engine

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 12
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 2000 Ford E-350 Super Duty Engines.
Engine Sub Model Notes Position
7.3L V8 Base, XL Cut to Fit - w/o Aux. Heater - Small I.D. Heater Hose Heater To Engine
Part Interchange
ACDelco 16080M
ACDelco 16204M
CARQUEST 19180
CARQUEST 18856
Duralast D87691
Ford F8UZ-18472-AA
Freshstart 4467
Gates 19180
Gates 18856
Goodyear 63194
Honda 79721-SH1-000
NAPA 11180
NAPA 10856
V&W 303691
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
7.3L V8	Base, XL	Cut to Fit - w/o Aux. Heater - Small I.D. Heater Hose	Heater To Engine

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87890

2000 Ford E-350 Super Duty HVAC Heater Hose DY 87890

Dayco HVAC Heater Hose 87890 - Heater To Pipe-1

Position: Heater To Pipe-1

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 31
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 2000 Ford E-350 Super Duty Engines.
Engine Sub Model Notes Position
5.4L V8 Base, XL Cut to Fit - w/o Aux. Heater - Small I.D. Heater Hose Heater To Pipe-1
Part Interchange
ACDelco 18192L
ACDelco 18165L
CARQUEST 19201
CARQUEST 19191
Duralast E87890
Ford F7UZ-18472-NA
Ford F81Z-18472-MB
Gates 19201
Gates 19191
NAPA 11201
NAPA 11191
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
5.4L V8	Base, XL	Cut to Fit - w/o Aux. Heater - Small I.D. Heater Hose	Heater To Pipe-1

Part Name: HVAC Heater HoseBrand: GatesPart#: 19277

2000 Ford E-350 Super Duty HVAC Heater Hose ZO 19277

Gates HVAC Heater Hose 19277 - Heater To Intake Manifold

Position: Heater To Intake Manifold

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 22.27
Inside Diameter 1 : .62
Inside Diameter 2 : .73
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments

This Part Fits Following 2000 Ford E-350 Super Duty Engines.

Engine	Sub Model	Notes	Fit Notes	Position
5.4L V8	Base, XL	W/O Aux. Heater; Re-use existing flow restrictor. - Molded Heater Hose	Fuel Type: CNG, GAS	Heater To Intake Manifold
6.8L V10	Base, XL	W/O Aux. Heater; Re-use existing flow restrictor. - Molded Heater Hose	Fuel Type: GAS	Heater To Intake Manifold

Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 19191

2000 Ford E-350 Super Duty HVAC Heater Hose ZO 19191

Gates HVAC Heater Hose 19191 - Heater To Pipe-1

Position: Heater To Pipe-1

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 35
Inside Diameter 1 : .63
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments

This Part Fits Following 2000 Ford E-350 Super Duty Engines.

Engine	Sub Model	Notes	Fit Notes	Position
5.4L V8	Base, XL	W/O Aux. Heater - Molded Heater Hose	Fuel Type: CNG, GAS	Heater To Pipe-1
6.8L V10	Base, XL	W/O Aux. Heater - Molded Heater Hose	Fuel Type: GAS	Heater To Pipe-1

Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 28409

2000 Ford E-350 Super Duty HVAC Heater Hose ZO 28409

Gates HVAC Heater Hose 28409 - Radiator To Reservoir

Position: Radiator To Reservoir

Description:

Straight Heater Hose Standard

Part Specifications:

Centerline Length : 50
Centerline Length : 15.24
Centerline Length : 600
Inside Diameter 1 : .375
Working Pressure : 60
Weight Per Length : 8.25 lbs./Carton

Features:

Premium hose constructed for long service life.
- Unaffected by most coolants and non-oil based coolant additives and by high cooling system pressures
- Good resistance to high temperatures for extended periods of time
- Similar to SAE 20R3 Class D-2
- Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 2000 Ford E-350 Super Duty Engines.
Engine Sub Model Notes Fit Notes Position
7.3L V8 Base, XL Cut to Length, 16" - Straight Heater Hose (Standard) Fuel Type: DIESEL Radiator To Reservoir
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
7.3L V8	Base, XL	Cut to Length, 16" - Straight Heater Hose (Standard)	Fuel Type: DIESEL	Radiator To Reservoir

Part Name: HVAC Heater HoseBrand: GatesPart#: 22614

2000 Ford E-350 Super Duty HVAC Heater Hose ZO 22614

Gates HVAC Heater Hose 22614 - Heater (Lower)

Position: Heater (Lower)

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 61.87
Number of Branches : 1
Inside Diameter 1 : .62
Inside Diameter 2 : .62
Inside Diameter 3 : .75
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments

This Part Fits Following 2000 Ford E-350 Super Duty Engines.

Engine	Sub Model	Notes	Fit Notes	Position
5.4L V8	Base, XL	W/Aux. Heater/A.C. Prep Pack - Molded Coolant Hose	Fuel Type: CNG, GAS	Heater (Lower)
6.8L V10	Base, XL	W/Aux. Heater/A.C. Prep Pack - Molded Coolant Hose	Fuel Type: GAS	Heater (Lower)

Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 22624

2000 Ford E-350 Super Duty HVAC Heater Hose ZO 22624

Gates HVAC Heater Hose 22624 - Heater To Pipe-1

Position: Heater To Pipe-1

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 38.53
Number of Branches : 1
Inside Diameter 1 : .63
Inside Diameter 2 : .63
Inside Diameter 3 : .63
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments

This Part Fits Following 2000 Ford E-350 Super Duty Engines.

Engine	Sub Model	Notes	Fit Notes	Position
5.4L V8	Base, XL	W/Aux. Heater - Molded Coolant Hose	Fuel Type: CNG, GAS	Heater To Pipe-1
6.8L V10	Base, XL	W/Aux. Heater - Molded Coolant Hose	Fuel Type: GAS	Heater To Pipe-1

Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

My Vehicle:

2000 Ford E-350 Super Duty HVAC Heater Hose

Dayco HVAC Heater Hose 87666 - Heater To Tee-2

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87848 - Tee-2 To Pipe

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87691 - Heater To Engine

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87890 - Heater To Pipe-1

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19277 - Heater To Intake Manifold

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19191 - Heater To Pipe-1

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28409 - Radiator To Reservoir

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 22614 - Heater (Lower)

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 22624 - Heater To Pipe-1

Description:

Part Specifications:

Features:

Related HVAC Parts

ACDelco	14111S
ACDelco	14172S
Duralast	B87666
Freshstart	63125
Gates	19077
Gates	18805
General Motors	10135301
Goodyear	63125
NAPA	10805
NAPA	11077
V&W	303666

ACDelco	18074L
CARQUEST	18914
Duralast	E87848
Ford	F7UZ-18472-HA
Gates	18914
General Motors	15145587
General Motors	15647934
General Motors	15763368
Goodyear	64133
NAPA	10914

ACDelco	16080M
ACDelco	16204M
CARQUEST	19180
CARQUEST	18856
Duralast	D87691
Ford	F8UZ-18472-AA
Freshstart	4467
Gates	19180
Gates	18856
Goodyear	63194
Honda	79721-SH1-000
NAPA	11180
NAPA	10856
V&W	303691

ACDelco	18192L
ACDelco	18165L
CARQUEST	19201
CARQUEST	19191
Duralast	E87890
Ford	F7UZ-18472-NA
Ford	F81Z-18472-MB
Gates	19201
Gates	19191
NAPA	11201
NAPA	11191

My Vehicle:

2000 Ford E-350 Super Duty HVAC Heater Hose

Dayco HVAC Heater Hose 87666 - Heater To Tee-2

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87848 - Tee-2 To Pipe

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87691 - Heater To Engine

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87890 - Heater To Pipe-1

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19277 - Heater To Intake Manifold

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19191 - Heater To Pipe-1

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28409 - Radiator To Reservoir

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 22614 - Heater (Lower)

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 22624 - Heater To Pipe-1

Description:

Part Specifications:

Features:

Related HVAC Parts

What Is MAP Price?

What Is MAP Price?

Core Return Process

Parts list X

Part added to your Kart X

Find exact fit part for your car. X