1998 Dodge Ram 2500 Drive Shaft

Part Name: Drive ShaftBrand: CardonePart#: 65-9813

Cardone Drive Shaft 65-9813 - Front

Position: Front

Description:

Prop Shaft Domestic

Part Specifications:

Product Condition : Remanufactured
Greasable : Yes
Drive Shaft Material : Steel
Tubing Outer Diameter : 2.005"
Length : 33.50

Features:

A1 CARDONE Remanufactured Prop Shafts/Driveshafts are engineered to meet or exceed the original fit, form and function. Original designs are scrutinized and improved to make longer lasting parts. All units are tested to ensure reliable performance every time.
Unlike other manufacturers, CARDONE Prop Shafts are dynamically balanced, which is superior to static balancing, as the unit is balanced at the typical speed it will experience on the vehicle
Units are 100% dynamically balanced at 3200 RPMs for vibration-free operation and increased joint life
100% new universal joints are installed for a proper fit and function
Built to meet or exceed O.E.M. performance

Condition: New

Fitments

This Part Fits Following 1998 Dodge Ram 2500 Engines.

Engine	Sub Model	Notes	Fit Notes	Position
5.2L V8	Custom	Measurement is taken from the centerline of the U-Joint located at the slip yoke end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft - with NV241HD Transfer Case - with 33-1/2" Long Driveshaft - Reman. A-1 CARDONE Driveshaft/ Prop Shaft	Transmission Frcode: 47RE - Transmission Control Type: Automatic	Front
5.9L L6	Base	Measurement is taken from the centerline of the U-Joint located at the slip yoke end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft - with NV241HD Transfer Case - with 33-1/2" Long Driveshaft - Reman. A-1 CARDONE Driveshaft/ Prop Shaft	Transmission Frcode: 47RE - Transmission Control Type: Automatic	Front
5.9L V8	Base, Lujo, Limited, Custom	Measurement is taken from the centerline of the U-Joint located at the slip yoke end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft - with NV241HD Transfer Case - with 33-1/2" Long Driveshaft - Reman. A-1 CARDONE Driveshaft/ Prop Shaft	Transmission Frcode: 47RE - Transmission Control Type: Automatic	Front
8.0L V10	Base	Measurement is taken from the centerline of the U-Joint located at the slip yoke end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft - with NV241HD Transfer Case - with 33-1/2" Long Driveshaft - Reman. A-1 CARDONE Driveshaft/ Prop Shaft	Transmission Frcode: 47RE - Transmission Control Type: Automatic	Front

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months / 18,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: Drive ShaftBrand: DormanPart#: 938-156

1998 Dodge Ram 2500 Drive Shaft RB 938-156

Dorman Drive Shaft 938-156 - Front

Position: Front

Description:

Front Driveshaft Assembly

Part Specifications:

Drive Shaft Diameter : 2.5 In.
Drive Shaft Length : 30.28 In.
Drive Shaft Material : Steel
Drive Shaft Wall Thickness : 0.083 In.
Grade Type : Regular
Greaseable Drive Shaft : Yes
Overall Length Adjustable : Yes
Package Contents : 1 Driveshaft
Slip Yoke : Yes
Axle Nut Included : No
CV Joints Included : No

Condition: New

Fitments
This Part Fits Following 1998 Dodge Ram 2500 Engines.
Engine Sub Model Notes Fit Notes Position
5.9L V8 Base, Limited, Lujo Dana 60 Front Axle Transmission Control Type: Standard Front
Part Interchange
Chrysler 52105840AB
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
5.9L V8	Base, Limited, Lujo	Dana 60 Front Axle	Transmission Control Type: Standard	Front

Part Name: Drive ShaftBrand: DormanPart#: 938-158

1998 Dodge Ram 2500 Drive Shaft RB 938-158

Dorman Drive Shaft 938-158 - Front

Position: Front

Description:

Front Driveshaft Assembly

Part Specifications:

Drive Shaft Diameter : 2.5 In.
Drive Shaft Length : 32.25 In.
Drive Shaft Material : Steel
Drive Shaft Wall Thickness : 0.083 In.
Grade Type : Standard
Greaseable Drive Shaft : Yes
Overall Length Adjustable : Yes

Condition: New

Fitments

This Part Fits Following 1998 Dodge Ram 2500 Engines.

Engine	Sub Model	Notes	Fit Notes	Position
5.9L L6	Base	Dana 60 Rear Axle - w/PTO - Heavy Duty 241 Transfer Case	Transmission Control Type: Automatic - Drive Type: 4WD	Front
8.0L V10	Base	Dana 60 Rear Axle - w/PTO - Heavy Duty 241 Transfer Case	Transmission Control Type: Automatic - Drive Type: 4WD	Front

Part Interchange
Chrysler 52105862AB
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: Drive ShaftBrand: DormanPart#: 938-159

1998 Dodge Ram 2500 Drive Shaft RB 938-159

Dorman Drive Shaft 938-159 - Front

Position: Front

Description:

Front Driveshaft Assembly

Part Specifications:

Drive Shaft Diameter : 2.5 In.
Drive Shaft Length : 30.71 In.
Drive Shaft Material : Steel
Drive Shaft Wall Thickness : 0.083 In.
Grade Type : Standard
Greaseable Drive Shaft : Yes
Overall Length Adjustable : Yes

Condition: New

Fitments
This Part Fits Following 1998 Dodge Ram 2500 Engines.
Engine Sub Model Fit Notes Position
8.0L V10 Base Transmission Control Type: Standard - Drive Type: 4WD Front
Part Interchange
Chrysler 52105871AB
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Fit Notes	Position
8.0L V10	Base	Transmission Control Type: Standard - Drive Type: 4WD	Front

Part Name: Drive ShaftBrand: CardonePart#: 65-9871

1998 Dodge Ram 2500 Drive Shaft A1 65-9871

Cardone Drive Shaft 65-9871 - Front

Position: Front

Description:

Prop Shaft Domestic

Part Specifications:

Product Condition : Remanufactured
Greasable : Yes
Drive Shaft Material : Steel
Tubing Outer Diameter : 2.51
Length : 15.50

Features:

A1 CARDONE Remanufactured Prop Shafts/Driveshafts are engineered to meet or exceed the original fit, form and function. Original designs are scrutinized and improved to make longer lasting parts. All units are tested to ensure reliable performance every time.
Unlike other manufacturers, CARDONE Prop Shafts are dynamically balanced, which is superior to static balancing, as the unit is balanced at the typical speed it will experience on the vehicle
Units are 100% dynamically balanced at 3200 RPMs for vibration-free operation and increased joint life
100% new universal joints are installed for a proper fit and function
Built to meet or exceed O.E.M. performance

Condition: New

Fitments

This Part Fits Following 1998 Dodge Ram 2500 Engines.

Engine	Sub Model	Notes	Fit Notes	Position
5.2L V8	Custom	Measurement is taken by measuring the Tube length only. Measure from the centerline of the weld on one end to the centerline of the weld on the opposite end of the collapsed Prop Shaft - with NV241LD Transfer Case - with 15-1/2" Long Driveshaft - Reman. A-1 CARDONE Driveshaft/ Prop Shaft	Transmission Frcode: 47RE - Transmission Control Type: Automatic	Front
5.9L L6	Base	Measurement is taken by measuring the Tube length only. Measure from the centerline of the weld on one end to the centerline of the weld on the opposite end of the collapsed Prop Shaft - with NV241LD Transfer Case - with 15-1/2" Long Driveshaft - Reman. A-1 CARDONE Driveshaft/ Prop Shaft	Transmission Frcode: 47RE - Transmission Control Type: Automatic	Front
5.9L V8	Base, Lujo, Limited, Custom	Measurement is taken by measuring the Tube length only. Measure from the centerline of the weld on one end to the centerline of the weld on the opposite end of the collapsed Prop Shaft - with NV241LD Transfer Case - with 15-1/2" Long Driveshaft - Reman. A-1 CARDONE Driveshaft/ Prop Shaft	Transmission Frcode: 47RE - Transmission Control Type: Automatic	Front
8.0L V10	Base	Measurement is taken by measuring the Tube length only. Measure from the centerline of the weld on one end to the centerline of the weld on the opposite end of the collapsed Prop Shaft - with NV241LD Transfer Case - with 15-1/2" Long Driveshaft - Reman. A-1 CARDONE Driveshaft/ Prop Shaft	Transmission Frcode: 47RE - Transmission Control Type: Automatic	Front

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months / 18,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: Drive ShaftBrand: CardonePart#: 65-9873

1998 Dodge Ram 2500 Drive Shaft A1 65-9873

Cardone Drive Shaft 65-9873 - Front

Position: Front

Description:

Prop Shaft Domestic

Part Specifications:

Product Condition : Remanufactured
Greasable : Yes
Drive Shaft Material : Steel
Tubing Outer Diameter : 2.51
Length : 14.19

Features:

A1 CARDONE Remanufactured Prop Shafts/Driveshafts are engineered to meet or exceed the original fit, form and function. Original designs are scrutinized and improved to make longer lasting parts. All units are tested to ensure reliable performance every time.
Unlike other manufacturers, CARDONE Prop Shafts are dynamically balanced, which is superior to static balancing, as the unit is balanced at the typical speed it will experience on the vehicle
Units are 100% dynamically balanced at 3200 RPMs for vibration-free operation and increased joint life
100% new universal joints are installed for a proper fit and function
Built to meet or exceed O.E.M. performance

Condition: New

Fitments

This Part Fits Following 1998 Dodge Ram 2500 Engines.

Engine	Sub Model	Notes	Fit Notes	Position
5.2L V8	Custom	Measurement is taken by measuring the Tube length only. Measure from the centerline of the weld on one end to the centerline of the weld on the opposite end of the collapsed Prop Shaft - with 14-1/2" Long Driveshaft - Reman. A-1 CARDONE Driveshaft/ Prop Shaft	Transmission Control Type: Standard	Front
5.9L L6	Base	Measurement is taken by measuring the Tube length only. Measure from the centerline of the weld on one end to the centerline of the weld on the opposite end of the collapsed Prop Shaft - with 14-1/2" Long Driveshaft - Reman. A-1 CARDONE Driveshaft/ Prop Shaft	Transmission Control Type: Standard	Front
5.9L V8	Limited, Lujo, Base, Custom	Measurement is taken by measuring the Tube length only. Measure from the centerline of the weld on one end to the centerline of the weld on the opposite end of the collapsed Prop Shaft - with 14-1/2" Long Driveshaft - Reman. A-1 CARDONE Driveshaft/ Prop Shaft	Transmission Control Type: Standard	Front
8.0L V10	Base	Measurement is taken by measuring the Tube length only. Measure from the centerline of the weld on one end to the centerline of the weld on the opposite end of the collapsed Prop Shaft - with 14-1/2" Long Driveshaft - Reman. A-1 CARDONE Driveshaft/ Prop Shaft	Transmission Control Type: Standard	Front

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months / 18,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: Drive ShaftBrand: DormanPart#: 938-157

1998 Dodge Ram 2500 Drive Shaft RB 938-157

Dorman Drive Shaft 938-157 - Front

Position: Front

Description:

Front Driveshaft Assembly

Part Specifications:

Drive Shaft Diameter : 2.5 In.
Drive Shaft Length : 31.69 In.
Drive Shaft Material : Steel
Drive Shaft Wall Thickness : 0.083 In.
Grade Type : Standard
Greaseable Drive Shaft : Yes
Overall Length Adjustable : Yes

Condition: New

Fitments

This Part Fits Following 1998 Dodge Ram 2500 Engines.

Engine	Sub Model	Notes	Fit Notes	Position
5.2L V8	Custom	Dana 44 Rear Axle	Transmission Control Type: Automatic - Drive Type: 4WD	Front
5.9L L6	Base	Dana 44 Rear Axle	Transmission Control Type: Automatic - Drive Type: 4WD	Front
5.9L V8	Base, Limited, Lujo, Custom	Dana 44 Rear Axle	Transmission Control Type: Automatic - Drive Type: 4WD	Front
8.0L V10	Base	Dana 44 Rear Axle	Transmission Control Type: Automatic - Drive Type: 4WD	Front

Part Interchange
Chrysler 52105860AB
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: Drive ShaftBrand: CardonePart#: 65-9870

1998 Dodge Ram 2500 Drive Shaft A1 65-9870

Cardone Drive Shaft 65-9870 - Front

Position: Front

Description:

Prop Shaft Domestic

Part Specifications:

Product Condition : Remanufactured
Greasable : Yes
Drive Shaft Material : Steel
Tubing Outer Diameter : 2.51
Length : 20.00

Features:

A1 CARDONE Remanufactured Prop Shafts/Driveshafts are engineered to meet or exceed the original fit, form and function. Original designs are scrutinized and improved to make longer lasting parts. All units are tested to ensure reliable performance every time.
Unlike other manufacturers, CARDONE Prop Shafts are dynamically balanced, which is superior to static balancing, as the unit is balanced at the typical speed it will experience on the vehicle
Units are 100% dynamically balanced at 3200 RPMs for vibration-free operation and increased joint life
100% new universal joints are installed for a proper fit and function
Built to meet or exceed O.E.M. performance

Condition: New

Fitments

This Part Fits Following 1998 Dodge Ram 2500 Engines.

Engine	Sub Model	Notes	Fit Notes	Position
5.2L V8	Custom	Measurement is taken by measuring the Tube length only. Measure from the centerline of the weld on one end to the centerline of the weld on the opposite end of the collapsed Prop Shaft - with 20" Long Driveshaft - Reman. A-1 CARDONE Driveshaft/ Prop Shaft	Transmission Frcode: 46RH - Transmission Control Type: Automatic	Front
5.9L L6	Base	Measurement is taken by measuring the Tube length only. Measure from the centerline of the weld on one end to the centerline of the weld on the opposite end of the collapsed Prop Shaft - with 20" Long Driveshaft - Reman. A-1 CARDONE Driveshaft/ Prop Shaft	Transmission Frcode: 46RH - Transmission Control Type: Automatic	Front
5.9L V8	Base, Limited, Lujo, Custom	Measurement is taken by measuring the Tube length only. Measure from the centerline of the weld on one end to the centerline of the weld on the opposite end of the collapsed Prop Shaft - with 20" Long Driveshaft - Reman. A-1 CARDONE Driveshaft/ Prop Shaft	Transmission Frcode: 46RH - Transmission Control Type: Automatic	Front
8.0L V10	Base	Measurement is taken by measuring the Tube length only. Measure from the centerline of the weld on one end to the centerline of the weld on the opposite end of the collapsed Prop Shaft - with 20" Long Driveshaft - Reman. A-1 CARDONE Driveshaft/ Prop Shaft	Transmission Frcode: 46RH - Transmission Control Type: Automatic	Front

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months / 18,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: Drive ShaftBrand: DormanPart#: 946-124

1998 Dodge Ram 2500 Drive Shaft RB 946-124

Dorman Drive Shaft 946-124 - Rear

Position: Rear

Description:

Rear Driveshaft Assembly

Part Specifications:

Drive Shaft Diameter : 4 In.
Drive Shaft Length : 64.5 In.
Drive Shaft Material : Steel
Drive Shaft Wall Thickness : 0.083 In.
Grade Type : Standard
Greaseable Drive Shaft : No
Overall Length Adjustable : No

Condition: New

Fitments
This Part Fits Following 1998 Dodge Ram 2500 Engines.
Engine Sub Model Fit Notes Position
5.9L L6 Base Transmission Control Type: Standard - Drive Type: 4WD Rear
Part Interchange
Chrysler 52098244
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Fit Notes	Position
5.9L L6	Base	Transmission Control Type: Standard - Drive Type: 4WD	Rear

Part Name: Drive ShaftBrand: DormanPart#: 946-151

1998 Dodge Ram 2500 Drive Shaft RB 946-151

Dorman Drive Shaft 946-151 - Rear

Position: Rear

Description:

Rear Driveshaft Assembly

Part Specifications:

Drive Shaft Diameter : 3.5 In.
Drive Shaft Length : 97.87 In.
Drive Shaft Material : Steel
Drive Shaft Wall Thickness : 0.083 In.
Grade Type : Regular
Greaseable Drive Shaft : Yes
Overall Length Adjustable : Yes
Package Contents : 1 Driveshaft
Slip Yoke : Yes
Axle Nut Included : No
CV Joints Included : No

Condition: New

Fitments
This Part Fits Following 1998 Dodge Ram 2500 Engines.
Engine Sub Model Notes Fit Notes Position
5.9L V8 Base, Limited, Lujo C/B holes have course threads Transmission Control Type: Standard - Drive Type: RWD Rear
Part Interchange
Chrysler 52087686
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
5.9L V8	Base, Limited, Lujo	C/B holes have course threads	Transmission Control Type: Standard - Drive Type: RWD	Rear

Part Name: Drive ShaftBrand: DormanPart#: 946-152

1998 Dodge Ram 2500 Drive Shaft RB 946-152

Dorman Drive Shaft 946-152 - Rear

Position: Rear

Description:

Rear Driveshaft Assembly

Part Specifications:

Drive Shaft Diameter : 3.5 In.
Drive Shaft Length : 92.54 In.
Drive Shaft Material : Steel
Drive Shaft Wall Thickness : 0.083 In.
Grade Type : Regular
Greaseable Drive Shaft : Yes
Overall Length Adjustable : Yes
Package Contents : 1 Driveshaft
Slip Yoke : Yes
Axle Nut Included : No
CV Joints Included : No

Condition: New

Fitments
This Part Fits Following 1998 Dodge Ram 2500 Engines.
Engine Sub Model Notes Fit Notes Position
5.9L V8 Base, Limited, Lujo C/B holes have course threads Transmission Control Type: Automatic - Drive Type: RWD Rear
Part Interchange
Chrysler 52087687
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
5.9L V8	Base, Limited, Lujo	C/B holes have course threads	Transmission Control Type: Automatic - Drive Type: RWD	Rear

Part Name: Drive ShaftBrand: DormanPart#: 946-135

1998 Dodge Ram 2500 Drive Shaft RB 946-135

Dorman Drive Shaft 946-135 - Rear

Position: Rear

Description:

Rear Driveshaft Assembly

Part Specifications:

Drive Shaft Diameter : 3.5 In.
Drive Shaft Length : 92.54 In.
Drive Shaft Material : Steel
Drive Shaft Wall Thickness : 0.083 In.
Grade Type : Standard
Greaseable Drive Shaft : Yes
Overall Length Adjustable : Yes

Condition: New

Fitments
This Part Fits Following 1998 Dodge Ram 2500 Engines.
Engine Sub Model Notes Fit Notes Position
5.9L V8 Base, Limited, Lujo C/B holes have fine threads Transmission Control Type: Automatic - Drive Type: RWD Rear
Part Interchange
Chrysler 52105516
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
5.9L V8	Base, Limited, Lujo	C/B holes have fine threads	Transmission Control Type: Automatic - Drive Type: RWD	Rear

Part Name: Drive ShaftBrand: DormanPart#: 946-134

1998 Dodge Ram 2500 Drive Shaft RB 946-134

Dorman Drive Shaft 946-134 - Rear

Position: Rear

Description:

Rear Driveshaft Assembly

Part Specifications:

Drive Shaft Diameter : 3.5 In.
Drive Shaft Length : 91.41 In.
Drive Shaft Material : Steel
Drive Shaft Wall Thickness : 0.083 In.
Grade Type : Standard
Greaseable Drive Shaft : Yes
Overall Length Adjustable : Yes

Condition: New

Fitments
This Part Fits Following 1998 Dodge Ram 2500 Engines.
Engine Sub Model Fit Notes Position
5.9L L6 Base Transmission Control Type: Automatic - Drive Type: RWD Rear
Part Interchange
Chrysler 52105521
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Fit Notes	Position
5.9L L6	Base	Transmission Control Type: Automatic - Drive Type: RWD	Rear

Part Name: Drive ShaftBrand: DormanPart#: 936-405

1998 Dodge Ram 2500 Drive Shaft RB 936-405

Dorman Drive Shaft 936-405 - Rear

Position: Rear

Description:

Rear Driveshaft Assembly

Part Specifications:

Drive Shaft Diameter : 4 In.
Drive Shaft Length : 72.54 In.
Drive Shaft Material : Steel
Drive Shaft Wall Thickness : 0.083 In.
Grade Type : Standard
Greaseable Drive Shaft : No
Overall Length Adjustable : No

Condition: New

Fitments

This Part Fits Following 1998 Dodge Ram 2500 Engines.

Engine	Sub Model	Notes	Fit Notes	Position
8.0L V10	Base	Dana 70 Rear Axle	Transmission Speeds: 4 - Transmission Frcode: 47RE - Transmission Control Type: Automatic - Drive Type: RWD - Body Type: Standard Cab Pickup	Rear

Part Interchange
Chrysler 52105320
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: Drive ShaftBrand: DormanPart#: 936-411

1998 Dodge Ram 2500 Drive Shaft RB 936-411

Dorman Drive Shaft 936-411 - Rear

Position: Rear

Description:

Rear Driveshaft Assembly

Part Specifications:

Drive Shaft Diameter : 4 In.
Drive Shaft Length : 74.29 In.
Drive Shaft Material : Steel
Drive Shaft Wall Thickness : 0.083 In.
Grade Type : Standard
Greaseable Drive Shaft : No
Overall Length Adjustable : No

Condition: New

Fitments

This Part Fits Following 1998 Dodge Ram 2500 Engines.

Engine	Sub Model	Notes	Fit Notes	Position
5.2L V8	Custom	Dana M60 Rear Axle	Transmission Speeds: 4 - Transmission Frcode: 46RE - Transmission Control Type: Automatic - Drive Type: RWD - Body Type: Extended Cab Pickup	Rear
5.9L L6	Base	Dana M60 Rear Axle	Transmission Speeds: 4 - Transmission Frcode: 46RE - Transmission Control Type: Automatic - Drive Type: RWD - Body Type: Extended Cab Pickup	Rear
5.9L V8	Base, Custom, Limited, Lujo	Dana M60 Rear Axle	Transmission Speeds: 4 - Transmission Frcode: 46RE - Transmission Control Type: Automatic - Drive Type: RWD - Body Type: Extended Cab Pickup	Rear
8.0L V10	Base	Dana M60 Rear Axle	Transmission Speeds: 4 - Transmission Frcode: 46RE - Transmission Control Type: Automatic - Drive Type: RWD - Body Type: Extended Cab Pickup	Rear

Part Interchange
Chrysler 52105322
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: Drive ShaftBrand: DormanPart#: 946-149

1998 Dodge Ram 2500 Drive Shaft RB 946-149

Dorman Drive Shaft 946-149 - Rear

Position: Rear

Description:

Rear Driveshaft Assembly

Part Specifications:

Drive Shaft Diameter : 3.5 In.
Drive Shaft Length : 96.875 In.
Drive Shaft Material : Steel
Drive Shaft Wall Thickness : 0.083 In.
Grade Type : Standard
Greaseable Drive Shaft : Yes
Overall Length Adjustable : Yes

Condition: New

Fitments
This Part Fits Following 1998 Dodge Ram 2500 Engines.
Engine Sub Model Fit Notes Position
8.0L V10 Base Transmission Control Type: Standard - Drive Type: RWD - Body Type: Extended Cab Pickup Rear
Part Interchange
Chrysler 52105520AE
Chrysler 52105522
Chrysler 52105520AD
Chrysler 52105520AC
Chrysler 52105520AB
Chrysler 52105520
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Chrysler	52105520AE
Chrysler	52105522
Chrysler	52105520AD
Chrysler	52105520AC
Chrysler	52105520AB
Chrysler	52105520

My Vehicle:

1998 Dodge Ram 2500 Drive Shaft

Cardone Drive Shaft 65-9813 - Front

Description:

Part Specifications:

Features:

Dorman Drive Shaft 938-156 - Front

Description:

Part Specifications:

Dorman Drive Shaft 938-158 - Front

Description:

Part Specifications:

Dorman Drive Shaft 938-159 - Front

Description:

Part Specifications:

Cardone Drive Shaft 65-9871 - Front

Description:

Part Specifications:

Features:

Cardone Drive Shaft 65-9873 - Front

Description:

Part Specifications:

Features:

Dorman Drive Shaft 938-157 - Front

Description:

Part Specifications:

Cardone Drive Shaft 65-9870 - Front

Description:

Part Specifications:

Features:

Dorman Drive Shaft 946-124 - Rear

Description:

Part Specifications:

Dorman Drive Shaft 946-151 - Rear

Description:

Part Specifications:

Dorman Drive Shaft 946-152 - Rear

Description:

Part Specifications:

Dorman Drive Shaft 946-135 - Rear

Description:

Part Specifications:

Dorman Drive Shaft 946-134 - Rear

Description:

Part Specifications:

Dorman Drive Shaft 936-405 - Rear

Description:

Part Specifications:

Dorman Drive Shaft 936-411 - Rear

Description:

Part Specifications:

Dorman Drive Shaft 946-149 - Rear

Description:

Part Specifications:

Related Driveline and Axles Parts

What Is MAP Price?

What Is MAP Price?

Core Return Process

Parts list X

Part added to your Kart X

Find exact fit part for your car. X