2000 Dodge Dakota Radiator Coolant Hose

Part Name: Radiator Coolant HoseBrand: GatesPart#: 22550

Gates Radiator Coolant Hose 22550 - Lower

Position: Lower

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 16.5
Inside Diameter 1 : 1.72
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2000 Dodge Dakota Engines.
Engine Sub Model Notes Fit Notes Position
4.7L V8 Base, SLT, Sport Molded Coolant Hose Fuel Type: GAS Lower
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
4.7L V8	Base, SLT, Sport	Molded Coolant Hose	Fuel Type: GAS	Lower

Part Name: Radiator Coolant HoseBrand: DaycoPart#: 72019

2000 Dodge Dakota Radiator Coolant Hose DY 72019

Dayco Radiator Coolant Hose 72019 - Lower

Position: Lower

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 13 3/4
End 1 Inside Diameter : 1 3/4
End 2 Inside Diameter : 1 3/4
Contains Protective Sleeve : Y
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Condition: New

Fitments
This Part Fits Following 2000 Dodge Dakota Engines.
Engine Sub Model Notes Position
4.7L V8 Base, SLT, Sport Curved Radiator Hose Lower
Part Interchange
ACDelco 22378M
CARQUEST 22550
Chrysler 52028813AC
Chrysler 52028813
Duralast D72019
Freshstart 1252
Gates 22550
Goodyear 62279
NAPA 9183
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
4.7L V8	Base, SLT, Sport	Curved Radiator Hose	Lower

Part Name: Radiator Coolant HoseBrand: GatesPart#: 20065

2000 Dodge Dakota Radiator Coolant Hose ZO 20065

Gates Radiator Coolant Hose 20065 - Upper - Cap To Engine

Position: Upper - Cap To Engine

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 9.8
Inside Diameter 1 : 1.5
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 2000 Dodge Dakota Engines.
Engine Sub Model Notes Fit Notes Position
4.7L V8 Base, SLT, Sport Cut to fit - Molded Coolant Hose Fuel Type: GAS Upper - Cap To Engine
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
4.7L V8	Base, SLT, Sport	Cut to fit - Molded Coolant Hose	Fuel Type: GAS	Upper - Cap To Engine

Part Name: Radiator Coolant HoseBrand: DaycoPart#: 72024

2000 Dodge Dakota Radiator Coolant Hose DY 72024

Dayco Radiator Coolant Hose 72024 - Upper - Pipe To Radiator

Position: Upper - Pipe To Radiator

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Dual I.D. Hose
Trunk Height : 17
End 1 Inside Diameter : 1 7/16
End 2 Inside Diameter : 1 5/8
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Condition: New

Fitments
This Part Fits Following 2000 Dodge Dakota Engines.
Engine Sub Model Notes Position
3.9L V6 Base, SLT, Sport Reuse Tee - Curved Radiator Hose Upper - Pipe To Radiator
Part Interchange
ACDelco 24420L
CARQUEST 22544
Chrysler 052029193AJ
Chrysler 052029193
Chrysler 052029193AF
Duralast E72024
Gates 22544
Goodyear 62341
NAPA 9177
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
3.9L V6	Base, SLT, Sport	Reuse Tee - Curved Radiator Hose	Upper - Pipe To Radiator

Part Name: Radiator Coolant HoseBrand: GatesPart#: 22545

2000 Dodge Dakota Radiator Coolant Hose ZO 22545

Gates Radiator Coolant Hose 22545 - Upper - Radiator To Cap

Position: Upper - Radiator To Cap

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 7.5
Inside Diameter 1 : 1.46
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2000 Dodge Dakota Engines.
Engine Sub Model Notes Fit Notes Position
4.7L V8 Base, SLT, Sport Molded Coolant Hose Fuel Type: GAS Upper - Radiator To Cap
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
4.7L V8	Base, SLT, Sport	Molded Coolant Hose	Fuel Type: GAS	Upper - Radiator To Cap

Part Name: Radiator Coolant HoseBrand: DaycoPart#: 72046

2000 Dodge Dakota Radiator Coolant Hose DY 72046

Dayco Radiator Coolant Hose 72046 - Upper - Cap To Engine

Position: Upper - Cap To Engine

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Dual I.D. Hose
Trunk Height : 12
End 1 Inside Diameter : 1 1/2
End 2 Inside Diameter : 1 19/32
Contains Protective Sleeve : Y
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Condition: New

Fitments
This Part Fits Following 2000 Dodge Dakota Engines.
Engine Sub Model Notes Position
5.9L V8 R/T, SLT, Sport Reuse Tee - Curved Radiator Hose Upper - Cap To Engine
Part Interchange
ACDelco 20342S
CARQUEST 22543
Chrysler 52029195AI
Chrysler 52029195AB
Chrysler 52029195
Duralast D72046
Gates 22543
Goodyear 62811
NAPA 9176
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
5.9L V8	R/T, SLT, Sport	Reuse Tee - Curved Radiator Hose	Upper - Cap To Engine

Part Name: Radiator Coolant HoseBrand: DaycoPart#: 72023

2000 Dodge Dakota Radiator Coolant Hose DY 72023

Dayco Radiator Coolant Hose 72023 - Upper - Pipe To Engine

Position: Upper - Pipe To Engine

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Dual I.D. Hose
Trunk Height : 11
End 1 Inside Diameter : 1 7/16
End 2 Inside Diameter : 1 5/8
Contains Protective Sleeve : Y
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Condition: New

Fitments
This Part Fits Following 2000 Dodge Dakota Engines.
Engine Sub Model Notes Position
3.9L V6 Base, SLT, Sport Reuse Tee - Curved Radiator Hose Upper - Pipe To Engine
Part Interchange
ACDelco 20342S
CARQUEST 22543
Chrysler 052029193AF
Chrysler 052029193
Chrysler 052029193AJ
Chrysler 052029193AH
Duralast C72023
Gates 22543
Goodyear 62811
NAPA 9176
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
3.9L V6	Base, SLT, Sport	Reuse Tee - Curved Radiator Hose	Upper - Pipe To Engine

Part Name: Radiator Coolant HoseBrand: DaycoPart#: 72047

2000 Dodge Dakota Radiator Coolant Hose DY 72047

Dayco Radiator Coolant Hose 72047 - Upper - Radiator To Cap

Position: Upper - Radiator To Cap

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Dual I.D. Hose
Trunk Height : 15
End 1 Inside Diameter : 1 1/2
End 2 Inside Diameter : 1 19/32
Contains Protective Sleeve : Y
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Condition: New

Fitments
This Part Fits Following 2000 Dodge Dakota Engines.
Engine Sub Model Notes Position
5.9L V8 R/T, SLT, Sport Reuse Tee - Curved Radiator Hose Upper - Radiator To Cap
Part Interchange
Chrysler 52029195AI
Chrysler 52029195AB
Chrysler 52029195
Duralast E72047
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
5.9L V8	R/T, SLT, Sport	Reuse Tee - Curved Radiator Hose	Upper - Radiator To Cap

Part Name: Radiator Coolant HoseBrand: GatesPart#: 22543

2000 Dodge Dakota Radiator Coolant Hose ZO 22543

Gates Radiator Coolant Hose 22543 - Upper - Cap To Engine

Position: Upper - Cap To Engine

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 13.7
Inside Diameter 1 : 1.46
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2000 Dodge Dakota Engines.
Engine Sub Model Notes Fit Notes Position
3.9L V6 Base, SLT, Sport Molded Coolant Hose Fuel Type: GAS Upper - Cap To Engine
5.9L V8 R/T, SLT, Sport Molded Coolant Hose Fuel Type: GAS Upper - Cap To Engine
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.9L V6	Base, SLT, Sport	Molded Coolant Hose	Fuel Type: GAS	Upper - Cap To Engine
5.9L V8	R/T, SLT, Sport	Molded Coolant Hose	Fuel Type: GAS	Upper - Cap To Engine

Part Name: Radiator Coolant HoseBrand: GatesPart#: 22544

2000 Dodge Dakota Radiator Coolant Hose ZO 22544

Gates Radiator Coolant Hose 22544 - Upper - Radiator To Cap

Position: Upper - Radiator To Cap

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 18
Inside Diameter 1 : 1.46
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments

This Part Fits Following 2000 Dodge Dakota Engines.

Engine	Sub Model	Notes	Fit Notes	Position
3.9L V6	Base, SLT, Sport	Molded Coolant Hose	Fuel Type: GAS	Upper - Radiator To Cap
5.9L V8	R/T, SLT, Sport	Cut to fit - Molded Coolant Hose	Fuel Type: GAS	Upper - Radiator To Cap

Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: Radiator Coolant HoseBrand: DaycoPart#: 72048

2000 Dodge Dakota Radiator Coolant Hose DY 72048

Dayco Radiator Coolant Hose 72048 - Lower

Position: Lower

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 14
End 1 Inside Diameter : 1 3/4
End 2 Inside Diameter : 1 3/4
Contains Protective Sleeve : Y
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Condition: New

Fitments
This Part Fits Following 2000 Dodge Dakota Engines.
Engine Sub Model Notes Position
5.9L V8 R/T, SLT, Sport Curved Radiator Hose Lower
Part Interchange
ACDelco 22379M
CARQUEST 22551
Chrysler 52029196AC
Chrysler 52029196AB
Chrysler 52029196
Duralast E72048
Freshstart 62793
Gates 22551
Goodyear 62793
NAPA 9184
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
5.9L V8	R/T, SLT, Sport	Curved Radiator Hose	Lower

Part Name: Radiator Coolant HoseBrand: DaycoPart#: 72018

2000 Dodge Dakota Radiator Coolant Hose DY 72018

Dayco Radiator Coolant Hose 72018 - Lower

Position: Lower

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 16
End 1 Inside Diameter : 1 3/4
End 2 Inside Diameter : 1 3/4
Contains Protective Sleeve : Y
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Condition: New

Fitments
This Part Fits Following 2000 Dodge Dakota Engines.
Engine Sub Model Notes Position
3.9L V6 Base, SLT, Sport Curved Radiator Hose Lower
Part Interchange
ACDelco 22377M
CARQUEST 22549
Chrysler 052029194
Chrysler 052029194AC
Duralast E72018
Gates 22549
Goodyear 62792
NAPA 9182
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
3.9L V6	Base, SLT, Sport	Curved Radiator Hose	Lower

Part Name: Radiator Coolant HoseBrand: DaycoPart#: 72089

2000 Dodge Dakota Radiator Coolant Hose DY 72089

Dayco Radiator Coolant Hose 72089 - Upper

Position: Upper

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Dual I.D. Hose
Trunk Height : 16
End 1 Inside Diameter : 1 1/4
End 2 Inside Diameter : 1 7/16
Contains Protective Sleeve : Y
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Condition: New

Fitments
This Part Fits Following 2000 Dodge Dakota Engines.
Engine Sub Model Notes Position
2.5L L4 Base, SLT, Sport Curved Radiator Hose Upper
Part Interchange
ACDelco 24341L
CARQUEST 22221
Chrysler 52028746
Duralast E72089
Freshstart 1181
Gates 22221
Goodyear 62227
NAPA 8863
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
2.5L L4	Base, SLT, Sport	Curved Radiator Hose	Upper

Part Name: Radiator Coolant HoseBrand: GatesPart#: 22551

2000 Dodge Dakota Radiator Coolant Hose ZO 22551

Gates Radiator Coolant Hose 22551 - Lower

Position: Lower

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 19.5
Inside Diameter 1 : 1.72
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2000 Dodge Dakota Engines.
Engine Sub Model Notes Fit Notes Position
5.9L V8 R/T, SLT, Sport Molded Coolant Hose Fuel Type: GAS Lower
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
5.9L V8	R/T, SLT, Sport	Molded Coolant Hose	Fuel Type: GAS	Lower

Part Name: Radiator Coolant HoseBrand: GatesPart#: 22549

2000 Dodge Dakota Radiator Coolant Hose ZO 22549

Gates Radiator Coolant Hose 22549 - Lower

Position: Lower

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 21.1
Inside Diameter 1 : 1.72
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2000 Dodge Dakota Engines.
Engine Sub Model Notes Fit Notes Position
3.9L V6 Base, SLT, Sport Molded Coolant Hose Fuel Type: GAS Lower
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.9L V6	Base, SLT, Sport	Molded Coolant Hose	Fuel Type: GAS	Lower

Part Name: Radiator Coolant HoseBrand: DaycoPart#: 72447

2000 Dodge Dakota Radiator Coolant Hose DY 72447

Dayco Radiator Coolant Hose 72447 - Upper

Position: Upper

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Branched Hose
Trunk Height : 13 1/2
End 1 Inside Diameter : 1 1/2
End 1 Outside Diameter : 1 15/16
End 2 Inside Diameter : 1 1/2
End 2 Outside Diameter : 1 15/16
End 3 Inside Diameter : 3/8
End 3 Outside Diameter : 3/8
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Condition: New

Fitments
This Part Fits Following 2000 Dodge Dakota Engines.
Engine Sub Model Notes Position
4.7L V8 Base, SLT, Sport Curved Radiator Hose Upper
Part Interchange
ACDelco 22665M
CARQUEST 23577
Chrysler 52028810
Duralast D72447
Gates 23577
Goodyear 62448
NAPA 16290
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
4.7L V8	Base, SLT, Sport	Curved Radiator Hose	Upper

Part Name: Radiator Coolant HoseBrand: GatesPart#: 23577

2000 Dodge Dakota Radiator Coolant Hose ZO 23577

Gates Radiator Coolant Hose 23577 - Upper

Position: Upper

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 11.8
Number of Branches : 1
Inside Diameter 1 : 1.5
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2000 Dodge Dakota Engines.
Engine Sub Model Notes Fit Notes Position
4.7L V8 Base, SLT, Sport W/Housing - Molded Coolant Hose Fuel Type: GAS Upper
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
4.7L V8	Base, SLT, Sport	W/Housing - Molded Coolant Hose	Fuel Type: GAS	Upper

Part Name: Radiator Coolant HoseBrand: GatesPart#: 22548

2000 Dodge Dakota Radiator Coolant Hose ZO 22548

Gates Radiator Coolant Hose 22548 - Lower

Position: Lower

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 39.6
Inside Diameter 1 : 1.76
Contains Spring : Yes
Number of Branches : 0

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2000 Dodge Dakota Engines.
Engine Sub Model Notes Fit Notes Position
2.5L L4 Base, SLT, Sport Molded Coolant Hose Fuel Type: GAS Lower
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.5L L4	Base, SLT, Sport	Molded Coolant Hose	Fuel Type: GAS	Lower

Part Name: Radiator Coolant HoseBrand: DaycoPart#: 72626

2000 Dodge Dakota Radiator Coolant Hose DY 72626

Dayco Radiator Coolant Hose 72626 - Upper

Position: Upper

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Branched Hose
Trunk Height : 27 1/2
End 1 Inside Diameter : 1 1/2
End 1 Outside Diameter : 1 29/32
End 2 Inside Diameter : 1 1/2
End 2 Outside Diameter : 1 29/32
End 3 Inside Diameter : 3/8
End 3 Outside Diameter : 3/8
Contains Protective Sleeve : Y
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose branched assembles are made with knitted reinforcement and all synthetic EPDM rubber construction providing the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges. This hose is made with a protective sleeve that protects contact areas against abrasion and heat.

Condition: New

Fitments
This Part Fits Following 2000 Dodge Dakota Engines.
Engine Sub Model Notes Position
3.9L V6 Base, SLT, Sport Complete Assembly - Curved Radiator Hose Upper
5.9L V8 R/T, SLT, Sport Complete Assembly - Cut to Fit - Curved Radiator Hose Upper
Part Interchange
ACDelco 26661X
CARQUEST 23556
Chrysler 052029193AF
Chrysler 052029193AJ
Chrysler 052029193AH
Chrysler 052029193AI
Duralast E72626
Gates 23556
Goodyear 62427
Goodyear 66807
NAPA 16277
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
3.9L V6	Base, SLT, Sport	Complete Assembly - Curved Radiator Hose	Upper
5.9L V8	R/T, SLT, Sport	Complete Assembly - Cut to Fit - Curved Radiator Hose	Upper

Part Name: Radiator Coolant HoseBrand: GatesPart#: 23556

2000 Dodge Dakota Radiator Coolant Hose ZO 23556

Gates Radiator Coolant Hose 23556 - Upper

Position: Upper

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 32
Inside Diameter 1 : 1.5
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2000 Dodge Dakota Engines.
Engine Sub Model Notes Fit Notes Position
3.9L V6 Base, SLT, Sport W/Housing - Molded Coolant Hose Fuel Type: GAS Upper
5.9L V8 R/T, SLT, Sport W/Housing; Cut to fit - Molded Coolant Hose Fuel Type: GAS Upper
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.9L V6	Base, SLT, Sport	W/Housing - Molded Coolant Hose	Fuel Type: GAS	Upper
5.9L V8	R/T, SLT, Sport	W/Housing; Cut to fit - Molded Coolant Hose	Fuel Type: GAS	Upper

Part Name: Radiator Coolant HoseBrand: GatesPart#: 23580

2000 Dodge Dakota Radiator Coolant Hose ZO 23580

Gates Radiator Coolant Hose 23580 - Upper

Position: Upper

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 34.9
Number of Branches : 1
Inside Diameter 1 : 1.5
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2000 Dodge Dakota Engines.
Engine Sub Model Notes Fit Notes Position
2.5L L4 Base, SLT, Sport W/Housing - Molded Coolant Hose Fuel Type: GAS Upper
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

ACDelco	22378M
CARQUEST	22550
Chrysler	52028813AC
Chrysler	52028813
Duralast	D72019
Freshstart	1252
Gates	22550
Goodyear	62279
NAPA	9183

ACDelco	24420L
CARQUEST	22544
Chrysler	052029193AJ
Chrysler	052029193
Chrysler	052029193AF
Duralast	E72024
Gates	22544
Goodyear	62341
NAPA	9177

ACDelco	20342S
CARQUEST	22543
Chrysler	52029195AI
Chrysler	52029195AB
Chrysler	52029195
Duralast	D72046
Gates	22543
Goodyear	62811
NAPA	9176

ACDelco	22379M
CARQUEST	22551
Chrysler	52029196AC
Chrysler	52029196AB
Chrysler	52029196
Duralast	E72048
Freshstart	62793
Gates	22551
Goodyear	62793
NAPA	9184

ACDelco	22377M
CARQUEST	22549
Chrysler	052029194
Chrysler	052029194AC
Duralast	E72018
Gates	22549
Goodyear	62792
NAPA	9182

ACDelco	24341L
CARQUEST	22221
Chrysler	52028746
Duralast	E72089
Freshstart	1181
Gates	22221
Goodyear	62227
NAPA	8863

ACDelco	22665M
CARQUEST	23577
Chrysler	52028810
Duralast	D72447
Gates	23577
Goodyear	62448
NAPA	16290

ACDelco	26661X
CARQUEST	23556
Chrysler	052029193AF
Chrysler	052029193AJ
Chrysler	052029193AH
Chrysler	052029193AI
Duralast	E72626
Gates	23556
Goodyear	62427
Goodyear	66807
NAPA	16277

My Vehicle:

2000 Dodge Dakota Radiator Coolant Hose

Gates Radiator Coolant Hose 22550 - Lower

Description:

Part Specifications:

Features:

Dayco Radiator Coolant Hose 72019 - Lower

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 20065 - Upper - Cap To Engine

Description:

Part Specifications:

Features:

Dayco Radiator Coolant Hose 72024 - Upper - Pipe To Radiator

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 22545 - Upper - Radiator To Cap

Description:

Part Specifications:

Features:

Dayco Radiator Coolant Hose 72046 - Upper - Cap To Engine

Description:

Part Specifications:

Features:

Dayco Radiator Coolant Hose 72023 - Upper - Pipe To Engine

Description:

Part Specifications:

Features:

Dayco Radiator Coolant Hose 72047 - Upper - Radiator To Cap

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 22543 - Upper - Cap To Engine

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 22544 - Upper - Radiator To Cap

Description:

Part Specifications:

Features:

Dayco Radiator Coolant Hose 72048 - Lower

Description:

Part Specifications:

Features:

Dayco Radiator Coolant Hose 72018 - Lower

Description:

Part Specifications:

Features:

Dayco Radiator Coolant Hose 72089 - Upper

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 22551 - Lower

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 22549 - Lower

Description:

Part Specifications:

Features:

Dayco Radiator Coolant Hose 72447 - Upper

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 23577 - Upper

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 22548 - Lower

Description:

Part Specifications:

Features:

Dayco Radiator Coolant Hose 72626 - Upper

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 23556 - Upper

Description: