2013 Chrysler 300 Radiator Coolant Hose

Part Name: Radiator Coolant HoseBrand: GatesPart#: 22940

Gates Radiator Coolant Hose 22940 - Upper

Position: Upper

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 12.5
Inside Diameter 1 : 1.44
Inside Diameter 2 : 1.75
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2013 Chrysler 300 Engines.
Engine Sub Model Notes Fit Notes Position
5.7L V8 C Lujo, C, C Luxury, S W/O Oil Cooler - Molded Coolant Hose Fuel Type: GAS Upper
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
5.7L V8	C Lujo, C, C Luxury, S	W/O Oil Cooler - Molded Coolant Hose	Fuel Type: GAS	Upper

Part Name: Radiator Coolant HoseBrand: DaycoPart#: 72282

2013 Chrysler 300 Radiator Coolant Hose DY 72282

Dayco Radiator Coolant Hose 72282 - Upper

Position: Upper

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Dual I.D. Hose
Trunk Height : 11
End 1 Inside Diameter : 1 7/16
End 2 Inside Diameter : 1 23/32
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Condition: New

Fitments
This Part Fits Following 2013 Chrysler 300 Engines.
Engine Sub Model Notes Position
5.7L V8 C, C Luxury, S Curved Radiator Hose Upper
Part Interchange
ACDelco 20427S
CARQUEST 22940
Chrysler 55111285AC
Chrysler 04596886AE
Chrysler 55038144AA
Chrysler 04596886AC
Duralast C72282
Gates 22940
Goodyear 62901
NAPA 9575
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
5.7L V8	C, C Luxury, S	Curved Radiator Hose	Upper

Part Name: Radiator Coolant HoseBrand: DaycoPart#: 73047

2013 Chrysler 300 Radiator Coolant Hose DY 73047

Dayco Radiator Coolant Hose 73047 - Lower

Position: Lower

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 13
End 1 Inside Diameter : 1 1/2
End 1 Outside Diameter : 1 13/16
End 2 Inside Diameter : 1 1/2
End 2 Outside Diameter : 1 13/16
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Condition: New

Fitments
This Part Fits Following 2013 Chrysler 300 Engines.
Engine Sub Model Notes Position
3.6L V6 Base, C, C Lujo, C Luxury, S, Touring Curved Radiator Hose Lower
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
3.6L V6	Base, C, C Lujo, C Luxury, S, Touring	Curved Radiator Hose	Lower

Part Name: Radiator Coolant HoseBrand: GatesPart#: 24600

2013 Chrysler 300 Radiator Coolant Hose ZO 24600

Gates Radiator Coolant Hose 24600 - Lower

Position: Lower

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 16.14
Inside Diameter 1 : 1.44
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2013 Chrysler 300 Engines.
Engine Sub Model Notes Fit Notes Position
3.6L V6 Base, C, C Lujo, C Luxury, S, Touring Molded Coolant Hose Fuel Type: FLEX, GAS Lower
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.6L V6	Base, C, C Lujo, C Luxury, S, Touring	Molded Coolant Hose	Fuel Type: FLEX, GAS	Lower

Part Name: Radiator Coolant HoseBrand: DaycoPart#: 72281

2013 Chrysler 300 Radiator Coolant Hose DY 72281

Dayco Radiator Coolant Hose 72281 - Lower

Position: Lower

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Dual I.D. Hose
Trunk Height : 21
End 1 Inside Diameter : 1 7/16
End 2 Inside Diameter : 1 21/32
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Condition: New

Fitments
This Part Fits Following 2013 Chrysler 300 Engines.
Engine Sub Model Notes Position
5.7L V8 C, C Luxury, S Curved Radiator Hose Lower
Part Interchange
ACDelco 26496X
CARQUEST 22941
Chrysler 04596874AE
Chrysler 04596874AC
Chrysler 04596874AD
Duralast E72281
Gates 22941
Goodyear 62902
NAPA 9576
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
5.7L V8	C, C Luxury, S	Curved Radiator Hose	Lower

Part Name: Radiator Coolant HoseBrand: GatesPart#: 24599

2013 Chrysler 300 Radiator Coolant Hose ZO 24599

Gates Radiator Coolant Hose 24599 - Upper

Position: Upper

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 20.18
Inside Diameter 1 : 1.44
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2013 Chrysler 300 Engines.
Engine Sub Model Notes Fit Notes Position
3.6L V6 Base, C, C Lujo, C Luxury, S, Touring Molded Coolant Hose Fuel Type: FLEX, GAS Upper
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
3.6L V6	Base, C, C Lujo, C Luxury, S, Touring	Molded Coolant Hose	Fuel Type: FLEX, GAS	Upper

Part Name: Radiator Coolant HoseBrand: GatesPart#: 22941

2013 Chrysler 300 Radiator Coolant Hose ZO 22941

Gates Radiator Coolant Hose 22941 - Lower

Position: Lower

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 34
Inside Diameter 1 : 1.44
Inside Diameter 2 : 1.65
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2013 Chrysler 300 Engines.
Engine Sub Model Notes Fit Notes Position
5.7L V8 C Lujo, C, C Luxury, S W/O Oil Cooler - Molded Coolant Hose Fuel Type: GAS Lower
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
5.7L V8	C Lujo, C, C Luxury, S	W/O Oil Cooler - Molded Coolant Hose	Fuel Type: GAS	Lower

Part Name: Radiator Coolant HoseBrand: DaycoPart#: 71598

2013 Chrysler 300 Radiator Coolant Hose DY 71598

Dayco Radiator Coolant Hose 71598 - Upper

Position: Upper

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Dual I.D. Hose
Trunk Height : 11
End 1 Inside Diameter : 1 3/4
End 2 Inside Diameter : 1 13/16
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Condition: New

Fitments
This Part Fits Following 2013 Chrysler 300 Engines.
Engine Sub Model Notes Position
6.4L V8 SRT8, SRT8 Core Curved Radiator Hose Upper

Engine	Sub Model	Notes	Position
6.4L V8	SRT8, SRT8 Core	Curved Radiator Hose	Upper

Part Interchange

ACDelco	20043S
CARQUEST	20608
Duralast	B71598
Ford	F2UA-8B273-VA
Ford	F2UZ-8260-A
Ford	F2UZ-8286-B
Ford	F4UA-8B273-HA
Ford	F2UZ-8286-A
Ford	F1UA-8B273-VA
Ford	E9UA-8B273-EA
Ford	F0UZ-8286-A
Freshstart	60228
Gates	20608
Goodyear	60228
Jaguar	MNC4505BC
Motorcraft	KM2078
Motorcraft	KM1875
Motorcraft	KM2004
NAPA	7369

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: Radiator Coolant HoseBrand: GatesPart#: 24088

2013 Chrysler 300 Radiator Coolant Hose ZO 24088

Gates Radiator Coolant Hose 24088 - Upper

Position: Upper

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 12.8
Inside Diameter 1 : 1.75
Contains Spring : Yes
Number of Branches : 0

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2013 Chrysler 300 Engines.
Engine Sub Model Notes Fit Notes Position
6.4L V8 SRT8, SRT8 Core Molded Coolant Hose Fuel Type: GAS Upper
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
6.4L V8	SRT8, SRT8 Core	Molded Coolant Hose	Fuel Type: GAS	Upper

Part Name: Radiator Coolant HoseBrand: MoparPart#: 5040052AC

Mopar Radiator Coolant Hose 5040052AC

Description:

Radiator Coolant Hose Mopar

Condition: New

Fitments
This Part Fits Following 2013 Chrysler 300 Engines.
Engine Sub Model Notes Fit Notes
6.4L V8 SRT8 INLET Body Num Doors: 4 - Cylinder Head Type: OHV - Fuel Delivery Type: FI - Fuel Type: GAS - Engine Designation: ESG - Drive Type: RWD - Body Type: Sedan
Warranty & Easy Return
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

ACDelco	20427S
CARQUEST	22940
Chrysler	55111285AC
Chrysler	04596886AE
Chrysler	55038144AA
Chrysler	04596886AC
Duralast	C72282
Gates	22940
Goodyear	62901
NAPA	9575

ACDelco	26496X
CARQUEST	22941
Chrysler	04596874AE
Chrysler	04596874AC
Chrysler	04596874AD
Duralast	E72281
Gates	22941
Goodyear	62902
NAPA	9576

My Vehicle:

2013 Chrysler 300 Radiator Coolant Hose

Gates Radiator Coolant Hose 22940 - Upper

Description:

Part Specifications:

Features:

Dayco Radiator Coolant Hose 72282 - Upper

Description:

Part Specifications:

Features:

Dayco Radiator Coolant Hose 73047 - Lower

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 24600 - Lower

Description:

Part Specifications:

Features:

Dayco Radiator Coolant Hose 72281 - Lower

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 24599 - Upper

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 22941 - Lower

Description:

Part Specifications:

Features:

Dayco Radiator Coolant Hose 71598 - Upper

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 24088 - Upper

Description:

Part Specifications:

Features:

Mopar Radiator Coolant Hose 5040052AC

Description:

Related Belts and Cooling Parts

What Is MAP Price?

What Is MAP Price?

Core Return Process

Parts list X

Part added to your Kart X

Find exact fit part for your car. X