2002 Chevrolet Silverado 1500 HVAC Heater Hose

Part Name: HVAC Heater HoseBrand: GatesPart#: 18623

Gates HVAC Heater Hose 18623 - Throttle Body To Engine

Position: Throttle Body To Engine

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 4.8
Inside Diameter 1 : .25
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2002 Chevrolet Silverado 1500 Engines.
Engine Sub Model Notes Fit Notes Position
4.8L V8 Base, LS, LT, WT Molded Heater Hose Fuel Type: GAS Throttle Body To Engine
5.3L V8 Base, LS, LT, WT Molded Heater Hose Fuel Type: FLEX, GAS Throttle Body To Engine
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
4.8L V8	Base, LS, LT, WT	Molded Heater Hose	Fuel Type: GAS	Throttle Body To Engine
5.3L V8	Base, LS, LT, WT	Molded Heater Hose	Fuel Type: FLEX, GAS	Throttle Body To Engine

Part Name: HVAC Heater HoseBrand: GatesPart#: 20338

2002 Chevrolet Silverado 1500 HVAC Heater Hose ZO 20338

Gates HVAC Heater Hose 20338 - Pipe To Engine

Position: Pipe To Engine

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 4.9
Inside Diameter 1 : .61
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Per Car Quantity: 4

Condition: New

Fitments
This Part Fits Following 2002 Chevrolet Silverado 1500 Engines.
Engine Sub Model Notes Fit Notes Position
4.3L V6 Base, Custom, LS, LT, WT Cut to fit - Molded Coolant Hose Fuel Type: GAS Pipe To Engine
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
4.3L V6	Base, Custom, LS, LT, WT	Cut to fit - Molded Coolant Hose	Fuel Type: GAS	Pipe To Engine

Part Name: HVAC Heater HoseBrand: DaycoPart#: 80400

2002 Chevrolet Silverado 1500 HVAC Heater Hose DY 80400

Dayco HVAC Heater Hose 80400 - Pipe To Engine

Position: Pipe To Engine

Description:

90 DEGREE COOLANT HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 6
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® 90 Degree Molded Coolant Hose is designed for vehicles that require special heater hoses with a molded 90 degree elbow to fit tight engine compartment routings. Multiple 90 degree hoses can be used with Dayco plastic connectors to fit complex routings. Knitted reinforcement and all synthetic EPDM construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. Dayco’s Molded Radiator and By-Pass Hose has a convenient plastic hang strap for quick and easy merchandising. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684.

Condition: New

Fitments
This Part Fits Following 2002 Chevrolet Silverado 1500 Engines.
Engine Sub Model Notes Position
4.3L V6 Base, Custom, LS, LT, WT 90? Molded Coolant Hose Pipe To Engine

Engine	Sub Model	Notes	Position
4.3L V6	Base, Custom, LS, LT, WT	90? Molded Coolant Hose	Pipe To Engine

Part Interchange

ACDelco	14228S
ACDelco	14160S
ACDelco	14229S
ACDelco	14237S
ACDelco	20227S
ACDelco	14405S
ACDelco	14148S
ACDelco	14243S
Atlas	MH-60
CARQUEST	19005
CARQUEST	19333
CARQUEST	28466
CARQUEST	21738
CARQUEST	19035
CARQUEST	21862
CARQUEST	21739
CARQUEST	21742
Chrysler	3918266
Chrysler	3918200
Chrysler	39182000
Datsun/Nissan	14056-88G05
Datsun/Nissan	21306-16A00
Datsun/Nissan	14055-57Y11
Datsun/Nissan	14056-77A01
Duralast	B80400
Ford	F1DE-8A506-AA
Ford	D4AZ-18472-G
Ford	E6AE-8A527-AA
Ford	F1DE-8A527-AA
Ford	E6DZ-8A506-A
Ford	E6DZ-8A527-A
Ford	E9SE-8597-B
Ford	E8SZ-8597-B
Ford	E6AE-8A506-AA
Ford	F40Y-18472-A
Ford	F5RZ-8290-A
Ford	E6AE-8A506-BB
Ford	F6DH-18D334-AD
Ford	F6DZ-18472-AB
Ford	F6DH-18D334-AB
Freshstart	4318
Freshstart	4101
Gates	28466
Gates	21739
Gates	21742
Gates	21862
Gates	21738
Gates	19005
Gates	19333
Gates	19645
Gates	19035
General Motors	10215999
General Motors	10197652
General Motors	10171104
General Motors	10284263
General Motors	55036950
General Motors	15708635
General Motors	15713591
General Motors	15553626
General Motors	12603761
General Motors	35232953
General Motors	12590013
General Motors	3523265
General Motors	10021318
General Motors	10145098
General Motors	10135305
General Motors	10038502
General Motors	21030565
General Motors	15984157
General Motors	22685822
General Motors	25662102
General Motors	10145118
General Motors	30013103
General Motors	25525213
General Motors	22704430
General Motors	22704428
Goodyear	63052
Goodyear	63806
Honda	79118-S3V-A00
Honda	19508-P72-000
Honda	19504-PEO-010
Honda	19504-PE0-010
Honda	79118-S3V-A01
Honda	79117-S3V-A00
Honda	79722-SD5-A00
Honda	19508-PE0-010
Isuzu	8-94384-326-3
Isuzu	8-94384-326-2
Kia	K01315421
Lazorlite	L34-8589
Mazda	KJ01-15-261
Motorcraft	KM1809
Motorcraft	KM1748
NAPA	11035
NAPA	9807
NAPA	11333
NAPA	11005
Pirelli	43806
Toyota	16261-74010
Toyota	16261-74030
Toyota	16264-74030
Toyota	87245-3D520
Volvo Cars	3M5H-18K580-AB

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: DaycoPart#: 80403

2002 Chevrolet Silverado 1500 HVAC Heater Hose DY 80403

Dayco HVAC Heater Hose 80403 - Heater Inlet

Position: Heater Inlet

Description:

90 DEGREE COOLANT HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 18
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® 90 Degree Molded Coolant Hose is designed for vehicles that require special heater hoses with a molded 90 degree elbow to fit tight engine compartment routings. Multiple 90 degree hoses can be used with Dayco plastic connectors to fit complex routings. Knitted reinforcement and all synthetic EPDM construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. Dayco’s Molded Radiator and By-Pass Hose has a convenient plastic hang strap for quick and easy merchandising. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684.

Condition: New

Fitments
This Part Fits Following 2002 Chevrolet Silverado 1500 Engines.
Engine Sub Model Notes Position
4.3L V6 Base, Custom, LS, LT, WT 90? Molded Coolant Hose Heater Inlet

Engine	Sub Model	Notes	Position
4.3L V6	Base, Custom, LS, LT, WT	90? Molded Coolant Hose	Heater Inlet

Part Interchange

ACDelco	18150L
ACDelco	26667X
CARQUEST	28469
Duralast	E80403
Ford	F57H-18D334-CA
Freshstart	4107
Gates	23570
Gates	28469
General Motors	14076098
General Motors	10387758
General Motors	15032160
Goodyear	63819
Honda	79721-S02-A00
Honda	19504-PPA-A00
Kia	0K30E-61-211D
Kia	0K30E-61-211C
NAPA	9810
NAPA	16285
Pirelli	43819
Toyota	87245-42190

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 28469

2002 Chevrolet Silverado 1500 HVAC Heater Hose ZO 28469

Gates HVAC Heater Hose 28469 - Heater Inlet

Position: Heater Inlet

Description:

90 Deg Molded Heater Hose

Part Specifications:

Centerline Length : 26
Arm Length 1 : 8
Arm Length 1 : 203.2
Arm Length 2 : 18
Arm Length 2 : 457.2
Inside Diameter 1 : .625
Angle : 90

Features:

Specially designed for difficult heater hose applications requiring sharp 90 degree bends in the hose. Eliminates the need for extensive inventory of OE type curved heater hose. Just 22 sizes handle thousands of applications.
- Engineered to resist electrochemical degradation the leading cause of hose failure.
- Resists water permeation.
- Similar to heater SAE 20R3 Type EC Class D-2.
- Use with heater hose connectors and bulk heater hose for virtually complete molded heater hose coverage.
- Temperature Rating: -40F to 275F (-40C to 135C).
Caution: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 2002 Chevrolet Silverado 1500 Engines.
Engine Sub Model Notes Fit Notes Position
4.3L V6 Base, Custom, LS, LT, WT Cut to fit - 90º Molded Heater Hose Fuel Type: GAS Heater Inlet
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
4.3L V6	Base, Custom, LS, LT, WT	Cut to fit - 90º Molded Heater Hose	Fuel Type: GAS	Heater Inlet

Part Name: HVAC Heater HoseBrand: DaycoPart#: 80405

2002 Chevrolet Silverado 1500 HVAC Heater Hose DY 80405

Dayco HVAC Heater Hose 80405 - Heater Hose

Position: Heater Hose

Description:

90 DEGREE COOLANT HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 36
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® 90 Degree Molded Coolant Hose is designed for vehicles that require special heater hoses with a molded 90 degree elbow to fit tight engine compartment routings. Multiple 90 degree hoses can be used with Dayco plastic connectors to fit complex routings. Knitted reinforcement and all synthetic EPDM construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. Dayco’s Molded Radiator and By-Pass Hose has a convenient plastic hang strap for quick and easy merchandising. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684.

Condition: New

Fitments

This Part Fits Following 2002 Chevrolet Silverado 1500 Engines.

Engine	Sub Model	Notes	Position
4.8L V8	Base, LS, LT, WT	Cut to Fit, Reuse OEM Connector - Molded - 90? Molded Coolant Hose	Heater Hose
5.3L V8	Base, LS, LT, WT	Cut to Fit, Reuse OEM Connector - Molded - 90? Molded Coolant Hose	Heater Hose

Part Interchange

ACDelco	16420M
ACDelco	18152L
Atlas	MH-65
CARQUEST	19459
CARQUEST	28471
Chrysler	4462406
Chrysler	5264133
Chrysler	4361127
Chrysler	55037326
Chrysler	4462087
Chrysler	1595160
Duralast	E80405
Ford	F57H-18472-CA
Freshstart	4106
Gates	19459
Gates	28471
General Motors	15545960
General Motors	55036491
Goodyear	63836
Mazda	GK3J-61-24YF
Mazda	GK3J-61-24YG
Mazda	3K3J-61-24YF
Mazda	GK3J-61-24YK
NAPA	9812
NAPA	11459
Pirelli	43836
Toyota	87245-3D490
Toyota	87209-04030

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: DaycoPart#: 86836

2002 Chevrolet Silverado 1500 HVAC Heater Hose DY 86836

Dayco HVAC Heater Hose 86836 - Throttle Body To Radiator

Position: Throttle Body To Radiator

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 29 1/2
End 1 Inside Diameter : 1/4
End 1 Outside Diameter : 17/32
End 2 Inside Diameter : 9/32
End 2 Outside Diameter : 17/32
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 2002 Chevrolet Silverado 1500 Engines.
Engine Sub Model Notes Fit Notes Position
4.8L V8 Base, LS, LT, WT Small I.D. Heater Hose Throttle Body To Radiator
5.3L V8 Base, LS, LT, WT Small I.D. Heater Hose Fuel Type: FLEX Throttle Body To Radiator
Part Interchange
ACDelco 18206L
ACDelco 18311L
Duralast E86836
Gates 18129
Gates 18126
General Motors 15765541
General Motors 15041308
Goodyear 64113
NAPA 10129
NAPA 10126
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
4.8L V8	Base, LS, LT, WT	Small I.D. Heater Hose		Throttle Body To Radiator
5.3L V8	Base, LS, LT, WT	Small I.D. Heater Hose	Fuel Type: FLEX	Throttle Body To Radiator

Part Name: HVAC Heater HoseBrand: GatesPart#: 18126

2002 Chevrolet Silverado 1500 HVAC Heater Hose ZO 18126

Gates HVAC Heater Hose 18126 - Radiator To Throttle Body

Position: Radiator To Throttle Body

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 35.8
Inside Diameter 1 : .23
Inside Diameter 2 : .3
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments

This Part Fits Following 2002 Chevrolet Silverado 1500 Engines.

Engine	Sub Model	Notes	Fit Notes	Position
4.8L V8	Base, LS, LT, WT	Molded Heater Hose	Fuel Type: GAS	Radiator To Throttle Body
5.3L V8	Base, LS, LT, WT	Molded Heater Hose	Fuel Type: FLEX, GAS	Radiator To Throttle Body

Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 22554

2002 Chevrolet Silverado 1500 HVAC Heater Hose ZO 22554

Gates HVAC Heater Hose 22554 - Thermostat To Heater

Position: Thermostat To Heater

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 19.1
Number of Branches : 2
Inside Diameter 1 : 1
Inside Diameter 2 : .75
Inside Diameter 3 : .63
Inside Diameter 4 : .63
Inside Diameter 4 : 16
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2002 Chevrolet Silverado 1500 Engines.
Engine Sub Model Notes Fit Notes Position
4.8L V8 Base, LS, LT, WT Molded Coolant Hose Fuel Type: GAS Thermostat To Heater
5.3L V8 Base, LS, LT, WT Molded Coolant Hose Fuel Type: FLEX, GAS Thermostat To Heater
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
4.8L V8	Base, LS, LT, WT	Molded Coolant Hose	Fuel Type: GAS	Thermostat To Heater
5.3L V8	Base, LS, LT, WT	Molded Coolant Hose	Fuel Type: FLEX, GAS	Thermostat To Heater

Part Name: HVAC Heater HoseBrand: GatesPart#: 18622

2002 Chevrolet Silverado 1500 HVAC Heater Hose ZO 18622

Gates HVAC Heater Hose 18622 - Radiator To Reservoir

Position: Radiator To Reservoir

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 23
Inside Diameter 1 : .48
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2002 Chevrolet Silverado 1500 Engines.
Engine Sub Model Notes Fit Notes Position
4.8L V8 Base, LS, LT, WT Molded Heater Hose Fuel Type: GAS Radiator To Reservoir
5.3L V8 Base, LS, LT, WT Molded Heater Hose Fuel Type: FLEX, GAS Radiator To Reservoir
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
4.8L V8	Base, LS, LT, WT	Molded Heater Hose	Fuel Type: GAS	Radiator To Reservoir
5.3L V8	Base, LS, LT, WT	Molded Heater Hose	Fuel Type: FLEX, GAS	Radiator To Reservoir

Part Name: HVAC Heater HoseBrand: DaycoPart#: 88412

2002 Chevrolet Silverado 1500 HVAC Heater Hose DY 88412

Dayco HVAC Heater Hose 88412 - Heater Hose

Position: Heater Hose

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Branched Hose
Trunk Height : 12
End 1 Inside Diameter : 23/32
End 1 Outside Diameter : 1 1/16
End 2 Inside Diameter : 1
End 2 Outside Diameter : 1 11/32
End 3 Inside Diameter : 19/32
End 3 Outside Diameter : 1
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

This Dayco® Molded Heater Hose branched assembly is designed to replace OEM coolant hose and provide long, reliable service. Made with the same bends and routing as the OEM assembly, this hose is designed to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684.

Condition: New

Fitments
This Part Fits Following 2002 Chevrolet Silverado 1500 Engines.
Engine Sub Model Notes Position
4.8L V8 Base, LS, LT, WT Branched - Small I.D. Heater Hose Heater Hose
5.3L V8 Base, LS, LT, WT Branched - Small I.D. Heater Hose Heater Hose

Engine	Sub Model	Notes	Position
4.8L V8	Base, LS, LT, WT	Branched - Small I.D. Heater Hose	Heater Hose
5.3L V8	Base, LS, LT, WT	Branched - Small I.D. Heater Hose	Heater Hose

Part Interchange

ACDelco	18221L
CARQUEST	22554
Duralast	E88412
Gates	22554
General Motors	15854959
General Motors	15834773
General Motors	22861873
General Motors	21994332
General Motors	12200560
General Motors	25904620
General Motors	22861872
General Motors	15834772
General Motors	15058002
General Motors	15051847
General Motors	15039023
General Motors	15006345
General Motors	15833714
General Motors	15059575
General Motors	15792822
General Motors	15059576
General Motors	15792821
General Motors	15792820
General Motors	15059577
Goodyear	62852
NAPA	9187

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 28410

2002 Chevrolet Silverado 1500 HVAC Heater Hose ZO 28410

Gates HVAC Heater Hose 28410 - Radiator To Reservoir

Position: Radiator To Reservoir

Description:

Straight Heater Hose Standard

Part Specifications:

Centerline Length : 50
Centerline Length : 15.24
Centerline Length : 600
Inside Diameter 1 : .5
Working Pressure : 60
Weight Per Length : 8.25 lbs./Carton

Features:

Premium hose constructed for long service life.
- Unaffected by most coolants and non-oil based coolant additives and by high cooling system pressures
- Good resistance to high temperatures for extended periods of time
- Similar to SAE 20R3 Class D-2
- Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 2002 Chevrolet Silverado 1500 Engines.
Engine Sub Model Notes Fit Notes Position
4.3L V6 Base, Custom, LS, LT, WT Cut to Length, 22" - Straight Heater Hose (Standard) Fuel Type: GAS Radiator To Reservoir
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
4.3L V6	Base, Custom, LS, LT, WT	Cut to Length, 22" - Straight Heater Hose (Standard)	Fuel Type: GAS	Radiator To Reservoir

Part Name: HVAC Heater HoseBrand: GatesPart#: 28411

2002 Chevrolet Silverado 1500 HVAC Heater Hose ZO 28411

Gates HVAC Heater Hose 28411 - Heater To Pipe, Heater To Thermostat

Position: Heater To Pipe, Heater To Thermostat

Description:

Straight Heater Hose Standard

Part Specifications:

Centerline Length : 50
Centerline Length : 15.24
Centerline Length : 600
Inside Diameter 1 : .625
Working Pressure : 60
Weight Per Length : 11.70 lbs./Carton

Features:

Premium hose constructed for long service life.
- Unaffected by most coolants and non-oil based coolant additives and by high cooling system pressures
- Good resistance to high temperatures for extended periods of time
- Similar to SAE 20R3 Class D-2
- Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments

This Part Fits Following 2002 Chevrolet Silverado 1500 Engines.

Engine	Sub Model	Notes	Fit Notes	Position
4.3L V6	Base, Custom, LS, LT, WT	Cut to Length, 14" - Straight Heater Hose (Standard)	Fuel Type: GAS	Heater To Pipe
4.8L V8	Base, LS, LT, WT	Cut to Length, 33" - Straight Heater Hose (Standard)	Fuel Type: GAS	Heater To Thermostat
5.3L V8	Base, LS, LT, WT	Cut to Length, 33" - Straight Heater Hose (Standard)	Fuel Type: FLEX, GAS	Heater To Thermostat

Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

ACDelco	18206L
ACDelco	18311L
Duralast	E86836
Gates	18129
Gates	18126
General Motors	15765541
General Motors	15041308
Goodyear	64113
NAPA	10129
NAPA	10126

My Vehicle:

2002 Chevrolet Silverado 1500 HVAC Heater Hose

Gates HVAC Heater Hose 18623 - Throttle Body To Engine

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 20338 - Pipe To Engine

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 80400 - Pipe To Engine

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 80403 - Heater Inlet

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28469 - Heater Inlet

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 80405 - Heater Hose

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 86836 - Throttle Body To Radiator

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18126 - Radiator To Throttle Body

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 22554 - Thermostat To Heater

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18622 - Radiator To Reservoir

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 88412 - Heater Hose

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28410 - Radiator To Reservoir

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28411 - Heater To Pipe, Heater To Thermostat

Description:

Part Specifications:

Features:

Related HVAC Parts

What Is MAP Price?

What Is MAP Price?

Core Return Process

Parts list X

Part added to your Kart X

Find exact fit part for your car. X