2000 Chevrolet S10 HVAC Heater Hose

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87769

Dayco HVAC Heater Hose 87769 - Heater Outlet

Position: Heater Outlet

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 8
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 2000 Chevrolet S10 Engines.
Engine Sub Model Notes Position
2.2L L4 Base, LS, Xtreme W.P. End - Small I.D. Heater Hose Heater Outlet
Part Interchange
ACDelco 14610S
ACDelco 14569S
CARQUEST 18047
CARQUEST 18165
Duralast C87769
Gates 18165
Gates 18047
General Motors 15149281
Honda 79776-STX-A00
Honda 79721-SV9-A00
NAPA 10165
NAPA 10047
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
2.2L L4	Base, LS, Xtreme	W.P. End - Small I.D. Heater Hose	Heater Outlet

Part Name: HVAC Heater HoseBrand: DaycoPart#: 86099

2000 Chevrolet S10 HVAC Heater Hose DY 86099

Dayco HVAC Heater Hose 86099 - Pipe To Engine

Position: Pipe To Engine

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Dual I.D. Hose
Trunk Height : 9
End 1 Inside Diameter : 19/32
End 2 Inside Diameter : 23/32
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 2000 Chevrolet S10 Engines.
Engine Sub Model Notes Position
2.2L L4 Base, LS, Xtreme Cut to Fit - Small I.D. Heater Hose Pipe To Engine

Engine	Sub Model	Notes	Position
2.2L L4	Base, LS, Xtreme	Cut to Fit - Small I.D. Heater Hose	Pipe To Engine

Part Interchange

ACDelco	14474S
ACDelco	14005S
CARQUEST	18069
CARQUEST	18079
Duralast	C86099
Ford	3W1Z-18472-AA
Ford	3W73-18K580-BC
Ford	F1VY-18472-A
Ford	F8VH-18K580-AB
Ford	F8VH-18K580-BB
Ford	F8VZ-18472-BA
Ford	F1VH-18C266-AD
Ford	1W7H-18K580-AB
Freshstart	4496
Gates	18069
Gates	18079
General Motors	22971444
General Motors	20809031
Goodyear	63223
NAPA	10079
NAPA	10069

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 18079

2000 Chevrolet S10 HVAC Heater Hose ZO 18079

Gates HVAC Heater Hose 18079 - Pipe-1 To Engine

Position: Pipe-1 To Engine

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 9.6
Inside Diameter 1 : .62
Inside Diameter 2 : .75
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2000 Chevrolet S10 Engines.
Engine Sub Model Notes Fit Notes Position
2.2L L4 Base, LS, Xtreme Cut to fit - Molded Heater Hose Fuel Type: FLEX, GAS Pipe-1 To Engine
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.2L L4	Base, LS, Xtreme	Cut to fit - Molded Heater Hose	Fuel Type: FLEX, GAS	Pipe-1 To Engine

Part Name: HVAC Heater HoseBrand: GatesPart#: 28469

2000 Chevrolet S10 HVAC Heater Hose ZO 28469

Gates HVAC Heater Hose 28469 - Heater To Pipe-1

Position: Heater To Pipe-1

Description:

90 Deg Molded Heater Hose

Part Specifications:

Centerline Length : 26
Arm Length 1 : 8
Arm Length 1 : 203.2
Arm Length 2 : 18
Arm Length 2 : 457.2
Inside Diameter 1 : .625
Angle : 90

Features:

Specially designed for difficult heater hose applications requiring sharp 90 degree bends in the hose. Eliminates the need for extensive inventory of OE type curved heater hose. Just 22 sizes handle thousands of applications.
- Engineered to resist electrochemical degradation the leading cause of hose failure.
- Resists water permeation.
- Similar to heater SAE 20R3 Type EC Class D-2.
- Use with heater hose connectors and bulk heater hose for virtually complete molded heater hose coverage.
- Temperature Rating: -40F to 275F (-40C to 135C).
Caution: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 2000 Chevrolet S10 Engines.
Engine Sub Model Notes Fit Notes Position
2.2L L4 Base, LS, Xtreme Cut to fit - 90º Molded Heater Hose Fuel Type: FLEX, GAS Heater To Pipe-1
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.2L L4	Base, LS, Xtreme	Cut to fit - 90º Molded Heater Hose	Fuel Type: FLEX, GAS	Heater To Pipe-1

Part Name: HVAC Heater HoseBrand: DaycoPart#: 88389

2000 Chevrolet S10 HVAC Heater Hose DY 88389

Dayco HVAC Heater Hose 88389 - Heater Inlet

Position: Heater Inlet

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 17 1/2
End 1 Inside Diameter : 3/4
End 2 Inside Diameter : 3/4
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 2000 Chevrolet S10 Engines.
Engine Sub Model Notes Position
4.3L V6 Base, LS, Xtreme, ZR2 Small I.D. Heater Hose Heater Inlet
Part Interchange
ACDelco 18139L
CARQUEST 19707
Duralast E88389
Freshstart 4639
Gates 19707
General Motors 22727136
General Motors 15978377
Goodyear 63504
NAPA 11707
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
4.3L V6	Base, LS, Xtreme, ZR2	Small I.D. Heater Hose	Heater Inlet

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87739

2000 Chevrolet S10 HVAC Heater Hose DY 87739

Dayco HVAC Heater Hose 87739 - Heater Outlet

Position: Heater Outlet

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 13 1/2
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 2000 Chevrolet S10 Engines.
Engine Sub Model Notes Position
4.3L V6 Base, LS, Xtreme, ZR2 Small I.D. Heater Hose Heater Outlet
Part Interchange
ACDelco 18275L
CARQUEST 19070
Duralast D87739
Freshstart 4640
Gates 19070
General Motors 15729000
Goodyear 63505
NAPA 11070
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
4.3L V6	Base, LS, Xtreme, ZR2	Small I.D. Heater Hose	Heater Outlet

Part Name: HVAC Heater HoseBrand: GatesPart#: 19070

2000 Chevrolet S10 HVAC Heater Hose ZO 19070

Gates HVAC Heater Hose 19070 - Heater To Water Pump

Position: Heater To Water Pump

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 36.8
Inside Diameter 1 : .59
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2000 Chevrolet S10 Engines.
Engine Sub Model Notes Fit Notes Position
4.3L V6 Base, LS, Xtreme, ZR2 Molded Heater Hose Fuel Type: GAS Heater To Water Pump
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
4.3L V6	Base, LS, Xtreme, ZR2	Molded Heater Hose	Fuel Type: GAS	Heater To Water Pump

Part Name: HVAC Heater HoseBrand: GatesPart#: 19707

2000 Chevrolet S10 HVAC Heater Hose ZO 19707

Gates HVAC Heater Hose 19707 - Heater To Engine

Position: Heater To Engine

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 23.8
Inside Diameter 1 : .71
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2000 Chevrolet S10 Engines.
Engine Sub Model Notes Fit Notes Position
4.3L V6 Base, LS, Xtreme, ZR2 Molded Heater Hose Fuel Type: GAS Heater To Engine
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
4.3L V6	Base, LS, Xtreme, ZR2	Molded Heater Hose	Fuel Type: GAS	Heater To Engine

Part Name: HVAC Heater HoseBrand: DaycoPart#: 88405

2000 Chevrolet S10 HVAC Heater Hose DY 88405

Dayco HVAC Heater Hose 88405 - Thermostat To Heater

Position: Thermostat To Heater

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 10 3/4
End 1 Inside Diameter : 23/32
End 2 Inside Diameter : 23/32
Contains Protective Sleeve : Y
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose and provide long, reliable service. Made with the same bends and routing as the OEM assembly, this hose is designed to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. This hose is made with a protective sleeve that protects contact areas against abrasion and heat.

Condition: New

Fitments
This Part Fits Following 2000 Chevrolet S10 Engines.
Engine Sub Model Notes Position
2.2L L4 Base, LS, Xtreme Small I.D. Heater Hose Thermostat To Heater
Part Interchange
ACDelco 14268S
CARQUEST 19747
Duralast C88405
Gates 19747
General Motors 15006022
NAPA 11747
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
2.2L L4	Base, LS, Xtreme	Small I.D. Heater Hose	Thermostat To Heater

Part Name: HVAC Heater HoseBrand: GatesPart#: 19747

2000 Chevrolet S10 HVAC Heater Hose ZO 19747

Gates HVAC Heater Hose 19747 - Heater To Pipe-2

Position: Heater To Pipe-2

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 14.7
Inside Diameter 1 : .72
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2000 Chevrolet S10 Engines.
Engine Sub Model Notes Fit Notes Position
2.2L L4 Base, LS, Xtreme Re-use existing flow restrictor. - Molded Heater Hose Fuel Type: FLEX, GAS Heater To Pipe-2
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.2L L4	Base, LS, Xtreme	Re-use existing flow restrictor. - Molded Heater Hose	Fuel Type: FLEX, GAS	Heater To Pipe-2

Part Name: HVAC Heater HoseBrand: GatesPart#: 28409

2000 Chevrolet S10 HVAC Heater Hose ZO 28409

Gates HVAC Heater Hose 28409 - Radiator To Reservoir

Position: Radiator To Reservoir

Description:

Straight Heater Hose Standard

Part Specifications:

Centerline Length : 50
Centerline Length : 15.24
Centerline Length : 600
Inside Diameter 1 : .375
Working Pressure : 60
Weight Per Length : 8.25 lbs./Carton

Features:

Premium hose constructed for long service life.
- Unaffected by most coolants and non-oil based coolant additives and by high cooling system pressures
- Good resistance to high temperatures for extended periods of time
- Similar to SAE 20R3 Class D-2
- Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments

This Part Fits Following 2000 Chevrolet S10 Engines.

Engine	Sub Model	Notes	Fit Notes	Position
2.2L L4	Base, LS, Xtreme	Cut to Length, 53" - Straight Heater Hose (Standard)	Fuel Type: FLEX, GAS	Radiator To Reservoir
4.3L V6	Base, LS, Xtreme, ZR2	Cut to Length, 16" - Straight Heater Hose (Standard)	Fuel Type: GAS	Radiator To Reservoir

Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 28412

2000 Chevrolet S10 HVAC Heater Hose ZO 28412

Gates HVAC Heater Hose 28412 - Pipe-1 To Water Pump

Position: Pipe-1 To Water Pump

Description:

Straight Heater Hose Standard

Part Specifications:

Centerline Length : 50
Centerline Length : 15.24
Centerline Length : 600
Inside Diameter 1 : .75
Working Pressure : 50
Weight Per Length : 13.20 lbs./Carton

Features:

Premium hose constructed for long service life.
- Unaffected by most coolants and non-oil based coolant additives and by high cooling system pressures
- Good resistance to high temperatures for extended periods of time
- Similar to SAE 20R3 Class D-2
- Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 2000 Chevrolet S10 Engines.
Engine Sub Model Notes Fit Notes Position
2.2L L4 Base, LS, Xtreme Cut to Length, 3" - Straight Heater Hose (Standard) Fuel Type: FLEX, GAS Pipe-1 To Water Pump
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

ACDelco	14610S
ACDelco	14569S
CARQUEST	18047
CARQUEST	18165
Duralast	C87769
Gates	18165
Gates	18047
General Motors	15149281
Honda	79776-STX-A00
Honda	79721-SV9-A00
NAPA	10165
NAPA	10047

ACDelco	18139L
CARQUEST	19707
Duralast	E88389
Freshstart	4639
Gates	19707
General Motors	22727136
General Motors	15978377
Goodyear	63504
NAPA	11707

ACDelco	18275L
CARQUEST	19070
Duralast	D87739
Freshstart	4640
Gates	19070
General Motors	15729000
Goodyear	63505
NAPA	11070

ACDelco	14268S
CARQUEST	19747
Duralast	C88405
Gates	19747
General Motors	15006022
NAPA	11747

My Vehicle:

2000 Chevrolet S10 HVAC Heater Hose

Dayco HVAC Heater Hose 87769 - Heater Outlet

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 86099 - Pipe To Engine

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18079 - Pipe-1 To Engine

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28469 - Heater To Pipe-1

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 88389 - Heater Inlet

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87739 - Heater Outlet

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19070 - Heater To Water Pump

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19707 - Heater To Engine

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 88405 - Thermostat To Heater

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19747 - Heater To Pipe-2

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28409 - Radiator To Reservoir

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28412 - Pipe-1 To Water Pump

Description:

Part Specifications:

Features:

Related HVAC Parts

What Is MAP Price?

What Is MAP Price?

Core Return Process

Parts list X

Part added to your Kart X

Find exact fit part for your car. X