2013 Chevrolet Malibu HVAC Heater Hose

Part Name: HVAC Heater HoseBrand: GatesPart#: 18320

Gates HVAC Heater Hose 18320 - Tee To Separator

Position: Tee To Separator

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 6
Inside Diameter 1 : .37
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2013 Chevrolet Malibu Engines.
Engine Sub Model Notes Fit Notes Position
2.4L L4 Eco Cut to fit - Molded Heater Hose Fuel Type: ELECTRIC/GAS Tee To Separator
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.4L L4	Eco	Cut to fit - Molded Heater Hose	Fuel Type: ELECTRIC/GAS	Tee To Separator

Part Name: HVAC Heater HoseBrand: DaycoPart#: 86099

2013 Chevrolet Malibu HVAC Heater Hose DY 86099

Dayco HVAC Heater Hose 86099 - Heater Inlet

Position: Heater Inlet

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Dual I.D. Hose
Trunk Height : 9
End 1 Inside Diameter : 19/32
End 2 Inside Diameter : 23/32
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 2013 Chevrolet Malibu Engines.
Engine Sub Model Notes Position
2.4L L4 Eco Small I.D. Heater Hose Heater Inlet

Engine	Sub Model	Notes	Position
2.4L L4	Eco	Small I.D. Heater Hose	Heater Inlet

Part Interchange

ACDelco	14474S
ACDelco	14005S
CARQUEST	18069
CARQUEST	18079
Duralast	C86099
Ford	3W1Z-18472-AA
Ford	3W73-18K580-BC
Ford	F1VY-18472-A
Ford	F8VH-18K580-AB
Ford	F8VH-18K580-BB
Ford	F8VZ-18472-BA
Ford	F1VH-18C266-AD
Ford	1W7H-18K580-AB
Freshstart	4496
Gates	18069
Gates	18079
General Motors	22971444
General Motors	20809031
Goodyear	63223
NAPA	10079
NAPA	10069

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 24160

2013 Chevrolet Malibu HVAC Heater Hose ZO 24160

Gates HVAC Heater Hose 24160 - Heater (Upper)

Position: Heater (Upper)

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 23.75
Inside Diameter 1 : .78
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2013 Chevrolet Malibu Engines.
Engine Sub Model Notes Fit Notes Position
2.0L L4 LT, LTZ Molded Coolant Hose Fuel Type: GAS Heater (Upper)
2.5L L4 LS, LT, LTZ Molded Coolant Hose Fuel Type: GAS Heater (Upper)
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.0L L4	LT, LTZ	Molded Coolant Hose	Fuel Type: GAS	Heater (Upper)
2.5L L4	LS, LT, LTZ	Molded Coolant Hose	Fuel Type: GAS	Heater (Upper)

Part Name: HVAC Heater HoseBrand: GatesPart#: 28411

2013 Chevrolet Malibu HVAC Heater Hose ZO 28411

Gates HVAC Heater Hose 28411 - Alternator To Separator

Position: Alternator To Separator

Description:

Straight Heater Hose Standard

Part Specifications:

Centerline Length : 50
Centerline Length : 15.24
Centerline Length : 600
Inside Diameter 1 : .625
Working Pressure : 60
Weight Per Length : 11.70 lbs./Carton

Features:

Premium hose constructed for long service life.
- Unaffected by most coolants and non-oil based coolant additives and by high cooling system pressures
- Good resistance to high temperatures for extended periods of time
- Similar to SAE 20R3 Class D-2
- Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 2013 Chevrolet Malibu Engines.
Engine Sub Model Notes Fit Notes Position
2.4L L4 Eco Cut to Length, 26" - Straight Heater Hose (Standard) Fuel Type: ELECTRIC/GAS Alternator To Separator
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.4L L4	Eco	Cut to Length, 26" - Straight Heater Hose (Standard)	Fuel Type: ELECTRIC/GAS	Alternator To Separator

Part Name: HVAC Heater HoseBrand: GatesPart#: 24161

2013 Chevrolet Malibu HVAC Heater Hose ZO 24161

Gates HVAC Heater Hose 24161 - Heater - Lower To Tee, Reservoir To Tee, Tee To Engine

Position: Heater - Lower To Tee, Reservoir To Tee, Tee To Engine

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 22
Number of Branches : 1
Inside Diameter 1 : .75
Inside Diameter 2 : .61
Inside Diameter 3 : .75
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments

This Part Fits Following 2013 Chevrolet Malibu Engines.

Engine	Sub Model	Notes	Fit Notes	Position
2.0L L4	LT, LTZ	Molded Coolant Hose	Fuel Type: GAS	Heater - Lower To Tee, Reservoir To Tee, Tee To Engine
2.5L L4	LS, LT, LTZ	Molded Coolant Hose	Fuel Type: GAS	Heater - Lower To Tee

Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

My Vehicle:

2013 Chevrolet Malibu HVAC Heater Hose

Gates HVAC Heater Hose 18320 - Tee To Separator

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 86099 - Heater Inlet

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 24160 - Heater (Upper)

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28411 - Alternator To Separator

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 24161 - Heater - Lower To Tee, Reservoir To Tee, Tee To Engine

Description:

Part Specifications:

Features:

Related HVAC Parts

My Vehicle:

2013 Chevrolet Malibu HVAC Heater Hose

Gates HVAC Heater Hose 18320 - Tee To Separator

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 86099 - Heater Inlet

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 24160 - Heater (Upper)

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28411 - Alternator To Separator

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 24161 - Heater - Lower To Tee, Reservoir To Tee, Tee To Engine

Description:

Part Specifications:

Features:

Related HVAC Parts

What Is MAP Price?

What Is MAP Price?

Core Return Process

Parts list X

Part added to your Kart X

Find exact fit part for your car. X