1996 Chevrolet K1500 Radiator Coolant Hose

Part Name: Radiator Coolant HoseBrand: GatesPart#: 22247

Gates Radiator Coolant Hose 22247 - Upper

Position: Upper

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 31.1
Inside Diameter 1 : 1.75
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1996 Chevrolet K1500 Engines.
Engine Sub Model Notes Fit Notes Position
6.5L V8 Base, Cheyenne, Silverado, WT Molded Coolant Hose Fuel Type: DIESEL Upper
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
6.5L V8	Base, Cheyenne, Silverado, WT	Molded Coolant Hose	Fuel Type: DIESEL	Upper

Part Name: Radiator Coolant HoseBrand: DaycoPart#: 71914

1996 Chevrolet K1500 Radiator Coolant Hose DY 71914

Dayco Radiator Coolant Hose 71914 - Upper

Position: Upper

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 26 1/4
End 1 Inside Diameter : 1 3/4
End 2 Inside Diameter : 1 3/4
Contains Protective Sleeve : Y
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Condition: New

Fitments
This Part Fits Following 1996 Chevrolet K1500 Engines.
Engine Sub Model Notes Position
6.5L V8 Base, Cheyenne, Silverado, WT Under 15,000 GVW - Curved Radiator Hose Upper
Part Interchange
ACDelco 26381X
CARQUEST 22247
Duralast E71914
Freshstart 1127
Freshstart 62170
Gates 22247
General Motors 15977349
General Motors 15977350
Goodyear 62170
NAPA 8887
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
6.5L V8	Base, Cheyenne, Silverado, WT	Under 15,000 GVW - Curved Radiator Hose	Upper

Part Name: Radiator Coolant HoseBrand: DaycoPart#: 71782

1996 Chevrolet K1500 Radiator Coolant Hose DY 71782

Dayco Radiator Coolant Hose 71782 - Lower - Tee To Reservoir

Position: Lower - Tee To Reservoir

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Dual I.D. Hose
Trunk Height : 29
End 1 Inside Diameter : 23/32
End 2 Inside Diameter : 1
Contains Protective Sleeve : Y
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Condition: New

Fitments
This Part Fits Following 1996 Chevrolet K1500 Engines.
Engine Sub Model Notes Position
6.5L V8 Base, Cheyenne, Silverado, WT Curved Radiator Hose Lower - Tee To Reservoir
Part Interchange
Duralast E71782
General Motors 15678946
General Motors 15031596
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
6.5L V8	Base, Cheyenne, Silverado, WT	Curved Radiator Hose	Lower - Tee To Reservoir

Part Name: Radiator Coolant HoseBrand: DaycoPart#: 72087

1996 Chevrolet K1500 Radiator Coolant Hose DY 72087

Dayco Radiator Coolant Hose 72087 - Upper

Position: Upper

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 28
End 1 Inside Diameter : 1 1/4
End 2 Inside Diameter : 1 1/4
Contains Protective Sleeve : Y
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Condition: New

Fitments
This Part Fits Following 1996 Chevrolet K1500 Engines.
Engine Sub Model Notes Position
4.3L V6 Base, Cheyenne, Silverado, WT Curved Radiator Hose Upper
Part Interchange
ACDelco 26312X
CARQUEST 22228
Duralast E72087
Freshstart 62454
Gates 22228
General Motors 15977346
Goodyear 62454
MasterPro 22228
NAPA 8870
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
4.3L V6	Base, Cheyenne, Silverado, WT	Curved Radiator Hose	Upper

Part Name: Radiator Coolant HoseBrand: GatesPart#: 19663

1996 Chevrolet K1500 Radiator Coolant Hose ZO 19663

Gates Radiator Coolant Hose 19663 - Lower - Reservoir To Tee

Position: Lower - Reservoir To Tee

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 43.3
Inside Diameter 1 : .62
Inside Diameter 2 : 1
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1996 Chevrolet K1500 Engines.
Engine Sub Model Notes Fit Notes Position
6.5L V8 Base, Cheyenne, Silverado, WT Cut to fit - Molded Heater Hose Fuel Type: DIESEL Lower - Reservoir To Tee
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
6.5L V8	Base, Cheyenne, Silverado, WT	Cut to fit - Molded Heater Hose	Fuel Type: DIESEL	Lower - Reservoir To Tee

Part Name: Radiator Coolant HoseBrand: DaycoPart#: 72088

1996 Chevrolet K1500 Radiator Coolant Hose DY 72088

Dayco Radiator Coolant Hose 72088 - Lower

Position: Lower

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Dual I.D. Hose
Trunk Height : 22
End 1 Inside Diameter : 1 1/2
End 2 Inside Diameter : 1 3/4
Contains Protective Sleeve : Y
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Condition: New

Fitments
This Part Fits Following 1996 Chevrolet K1500 Engines.
Engine Sub Model Notes Position
5.0L V8 Base, Cheyenne, Silverado, WT 40 In. Rad. - Curved Radiator Hose Lower
5.7L V8 Base, Cheyenne, Silverado, WT 40 In. Rad. - Curved Radiator Hose Lower
Part Interchange
ACDelco 26207X
CARQUEST 21941
Duralast E72088
Freshstart 1029
Gates 21941
General Motors 15659618
General Motors 15977371
Goodyear 62075
NAPA 8631
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
5.0L V8	Base, Cheyenne, Silverado, WT	40 In. Rad. - Curved Radiator Hose	Lower
5.7L V8	Base, Cheyenne, Silverado, WT	40 In. Rad. - Curved Radiator Hose	Lower

Part Name: Radiator Coolant HoseBrand: DaycoPart#: 71428

1996 Chevrolet K1500 Radiator Coolant Hose DY 71428

Dayco Radiator Coolant Hose 71428 - Lower

Position: Lower

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Dual I.D. Hose
Trunk Height : 15 1/4
End 1 Inside Diameter : 1 1/2
End 2 Inside Diameter : 1 3/4
Contains Protective Sleeve : Y
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Condition: New

Fitments
This Part Fits Following 1996 Chevrolet K1500 Engines.
Engine Sub Model Notes Position
5.0L V8 Base, Cheyenne, Silverado, WT 33 In. Rad. - Curved Radiator Hose Lower
5.7L V8 Base, Cheyenne, Silverado, WT 33 In. Rad. - Curved Radiator Hose Lower

Engine	Sub Model	Notes	Position
5.0L V8	Base, Cheyenne, Silverado, WT	33 In. Rad. - Curved Radiator Hose	Lower
5.7L V8	Base, Cheyenne, Silverado, WT	33 In. Rad. - Curved Radiator Hose	Lower

Part Interchange

ACDelco	22264M
ACDelco	24219L
Atlas	MC176
CARQUEST	21940
CARQUEST	21710
Duralast	D71428
Freshstart	973
Freshstart	378
Gates	21710
Gates	21940
General Motors	15607248
General Motors	15607210
General Motors	15567684
General Motors	15607239
General Motors	15607247
General Motors	15627104
General Motors	15659483
General Motors	15659612
General Motors	15659613
General Motors	15567682
General Motors	15956515
General Motors	15659485
Goodyear	61456
Goodyear	62021
MasterPro	21710
NAPA	8400
NAPA	8630
Pirelli	41456

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: Radiator Coolant HoseBrand: GatesPart#: 22228

1996 Chevrolet K1500 Radiator Coolant Hose ZO 22228

Gates Radiator Coolant Hose 22228 - Upper

Position: Upper

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 30.1
Inside Diameter 1 : 1.25
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1996 Chevrolet K1500 Engines.
Engine Sub Model Notes Fit Notes Position
4.3L V6 Base, Cheyenne, Silverado, WT Molded Coolant Hose Fuel Type: GAS Upper
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
4.3L V6	Base, Cheyenne, Silverado, WT	Molded Coolant Hose	Fuel Type: GAS	Upper

Part Name: Radiator Coolant HoseBrand: GatesPart#: 21941

1996 Chevrolet K1500 Radiator Coolant Hose ZO 21941

Gates Radiator Coolant Hose 21941 - Lower

Position: Lower

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 37
Inside Diameter 1 : 1.52
Inside Diameter 2 : 1.77
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments

This Part Fits Following 1996 Chevrolet K1500 Engines.

Engine	Sub Model	Notes	Fit Notes	Position
5.0L V8	Base, Cheyenne, Silverado, WT	W/O 100A. Alt. - Molded Coolant Hose	Fuel Type: GAS	Lower
5.7L V8	Base, Cheyenne, Silverado, WT	Molded Coolant Hose	Fuel Type: GAS	Lower

Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: Radiator Coolant HoseBrand: DaycoPart#: 71881

1996 Chevrolet K1500 Radiator Coolant Hose DY 71881

Dayco Radiator Coolant Hose 71881 - Upper

Position: Upper

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 27
End 1 Inside Diameter : 1 1/4
End 2 Inside Diameter : 1 1/4
Contains Protective Sleeve : Y
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Condition: New

Fitments
This Part Fits Following 1996 Chevrolet K1500 Engines.
Engine Sub Model Notes Position
5.0L V8 Base, Cheyenne, Silverado, WT 40 In. Rad. - Curved Radiator Hose Upper
5.7L V8 Base, Cheyenne, Silverado, WT 40 In. Rad. - Curved Radiator Hose Upper
Part Interchange
ACDelco 26349X
CARQUEST 22358
Duralast E71881
Freshstart 1128
Gates 22358
General Motors 15007573
General Motors 15977347
Goodyear 62171
MasterPro 22358
NAPA 8991
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
5.0L V8	Base, Cheyenne, Silverado, WT	40 In. Rad. - Curved Radiator Hose	Upper
5.7L V8	Base, Cheyenne, Silverado, WT	40 In. Rad. - Curved Radiator Hose	Upper

Part Name: Radiator Coolant HoseBrand: DaycoPart#: 71880

1996 Chevrolet K1500 Radiator Coolant Hose DY 71880

Dayco Radiator Coolant Hose 71880 - Upper

Position: Upper

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 21 1/2
End 1 Inside Diameter : 1 1/4
End 2 Inside Diameter : 1 1/4
Contains Protective Sleeve : Y
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Condition: New

Fitments
This Part Fits Following 1996 Chevrolet K1500 Engines.
Engine Sub Model Notes Position
5.0L V8 Cheyenne, Base, Silverado, WT 33 In. Rad. - Curved Radiator Hose Upper
5.7L V8 Base, Cheyenne, Silverado, WT 33 In. Rad. - Curved Radiator Hose Upper
Part Interchange
ACDelco 26307X
Duralast E71880
Freshstart 1117
Gates 22209
General Motors 15024900
General Motors 15977344
General Motors 15072926
General Motors 15960143
Goodyear 62172
MasterPro 22209
NAPA 8851
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
5.0L V8	Cheyenne, Base, Silverado, WT	33 In. Rad. - Curved Radiator Hose	Upper
5.7L V8	Base, Cheyenne, Silverado, WT	33 In. Rad. - Curved Radiator Hose	Upper

Part Name: Radiator Coolant HoseBrand: GatesPart#: 21710

1996 Chevrolet K1500 Radiator Coolant Hose ZO 21710

Gates Radiator Coolant Hose 21710 - Lower

Position: Lower

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 26.5
Inside Diameter 1 : 1.5
Inside Diameter 2 : 1.75
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1996 Chevrolet K1500 Engines.
Engine Sub Model Notes Fit Notes Position
5.0L V8 Base, Cheyenne, Silverado, WT W/100A. Alt. - Molded Coolant Hose Fuel Type: GAS Lower
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
5.0L V8	Base, Cheyenne, Silverado, WT	W/100A. Alt. - Molded Coolant Hose	Fuel Type: GAS	Lower

Part Name: Radiator Coolant HoseBrand: GatesPart#: 22209

1996 Chevrolet K1500 Radiator Coolant Hose ZO 22209

Gates Radiator Coolant Hose 22209 - Upper

Position: Upper

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 33.4
Inside Diameter 1 : 1.25
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1996 Chevrolet K1500 Engines.
Engine Sub Model Notes Fit Notes Position
5.0L V8 Base, Cheyenne, Silverado, WT Molded Coolant Hose Fuel Type: GAS Upper
5.7L V8 Base, Cheyenne, Silverado, WT Molded Coolant Hose Fuel Type: GAS Upper
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
5.0L V8	Base, Cheyenne, Silverado, WT	Molded Coolant Hose	Fuel Type: GAS	Upper
5.7L V8	Base, Cheyenne, Silverado, WT	Molded Coolant Hose	Fuel Type: GAS	Upper

Part Name: Radiator Coolant HoseBrand: DaycoPart#: 71725

1996 Chevrolet K1500 Radiator Coolant Hose DY 71725

Dayco Radiator Coolant Hose 71725 - Lower

Position: Lower

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Dual I.D. Hose
Trunk Height : 20
End 1 Inside Diameter : 1 17/32
End 2 Inside Diameter : 1 25/32
Contains Protective Sleeve : Y
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Condition: New

Fitments
This Part Fits Following 1996 Chevrolet K1500 Engines.
Engine Sub Model Notes Position
4.3L V6 Base, Cheyenne, Silverado, WT Curved Radiator Hose Lower
Part Interchange
ACDelco 26257X
CARQUEST 22086
Duralast E71725
Freshstart 377
Freshstart 1028
Gates 22086
General Motors 15965640
General Motors 15029023
General Motors 15963811
Goodyear 62074
Goodyear 61455
MasterPro 22086
NAPA 8767
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
4.3L V6	Base, Cheyenne, Silverado, WT	Curved Radiator Hose	Lower

Part Name: Radiator Coolant HoseBrand: GatesPart#: 22086

1996 Chevrolet K1500 Radiator Coolant Hose ZO 22086

Gates Radiator Coolant Hose 22086 - Lower

Position: Lower

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 30.2
Inside Diameter 1 : 1.52
Inside Diameter 2 : 1.77
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1996 Chevrolet K1500 Engines.
Engine Sub Model Notes Fit Notes Position
4.3L V6 Base, Cheyenne, Silverado, WT Molded Coolant Hose Fuel Type: GAS Lower
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
4.3L V6	Base, Cheyenne, Silverado, WT	Molded Coolant Hose	Fuel Type: GAS	Lower

Part Name: Radiator Coolant HoseBrand: GatesPart#: 25265

1996 Chevrolet K1500 Radiator Coolant Hose ZO 25265

Gates Radiator Coolant Hose 25265 - Upper

Position: Upper

Description:

Flexible Coolant Hose Standard

Part Specifications:

Centerline Length : 35
Inside Diameter 1 : 1.25

Features:

Gates Vulco-Flex(R) II hose will bend in almost any direction. It easily replicates the angles and planes of a wide variety of expensive original equipment coolant hose, for quick, easy replacement.
- Improved sealing surface for greater leak resistance and increased flexibility for easier installation.
- Heat and ozone resistant cover.
- Rated for SAE 20R5 Class D-2 performance.
- High temperature rating up to +257 Deg. F (+125 Deg. C).
Note: Gates recommends replacing clamps each time a new coolant hose is installed.
Caution: Do not use for fuel or oil transfer applications.
Gates Powering Progess

Condition: New

Fitments
This Part Fits Following 1996 Chevrolet K1500 Engines.
Engine Sub Model Notes Fit Notes Position
4.3L V6 Base, Cheyenne, Silverado, WT Flexible Coolant Hose (Standard) Fuel Type: GAS Upper
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
4.3L V6	Base, Cheyenne, Silverado, WT	Flexible Coolant Hose (Standard)	Fuel Type: GAS	Upper

Part Name: Radiator Coolant HoseBrand: DaycoPart#: 71761

1996 Chevrolet K1500 Radiator Coolant Hose DY 71761

Dayco Radiator Coolant Hose 71761 - Lower

Position: Lower

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Branched Hose
Trunk Height : 20 3/4
End 1 Inside Diameter : 1 25/32
End 1 Outside Diameter : 2 1/8
End 2 Inside Diameter : 2 1/8
End 2 Outside Diameter : 2 1/2
End 3 Inside Diameter : 3/4
Contains Protective Sleeve : Y
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Condition: New

Fitments
This Part Fits Following 1996 Chevrolet K1500 Engines.
Engine Sub Model Notes Position
6.5L V8 Base, Cheyenne, Silverado, WT Curved Radiator Hose Lower
Part Interchange
ACDelco 26264X
CARQUEST 22105
Duralast E71761
Freshstart 62114
Gates 22105
General Motors 15683910
General Motors 15693910
General Motors 15156272
Goodyear 62114
NAPA 8778
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
6.5L V8	Base, Cheyenne, Silverado, WT	Curved Radiator Hose	Lower

Part Name: Radiator Coolant HoseBrand: GatesPart#: 22105

1996 Chevrolet K1500 Radiator Coolant Hose ZO 22105

Gates Radiator Coolant Hose 22105 - Lower

Position: Lower

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 30.09
Number of Branches : 1
Inside Diameter 1 : 1.77
Inside Diameter 2 : 2.13
Inside Diameter 3 : .77
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 1996 Chevrolet K1500 Engines.
Engine Sub Model Notes Fit Notes Position
6.5L V8 Base, Cheyenne, Silverado, WT Molded Coolant Hose Fuel Type: DIESEL Lower
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

ACDelco	26381X
CARQUEST	22247
Duralast	E71914
Freshstart	1127
Freshstart	62170
Gates	22247
General Motors	15977349
General Motors	15977350
Goodyear	62170
NAPA	8887

ACDelco	26312X
CARQUEST	22228
Duralast	E72087
Freshstart	62454
Gates	22228
General Motors	15977346
Goodyear	62454
MasterPro	22228
NAPA	8870

ACDelco	26207X
CARQUEST	21941
Duralast	E72088
Freshstart	1029
Gates	21941
General Motors	15659618
General Motors	15977371
Goodyear	62075
NAPA	8631

ACDelco	26349X
CARQUEST	22358
Duralast	E71881
Freshstart	1128
Gates	22358
General Motors	15007573
General Motors	15977347
Goodyear	62171
MasterPro	22358
NAPA	8991

ACDelco	26307X
Duralast	E71880
Freshstart	1117
Gates	22209
General Motors	15024900
General Motors	15977344
General Motors	15072926
General Motors	15960143
Goodyear	62172
MasterPro	22209
NAPA	8851

ACDelco	26257X
CARQUEST	22086
Duralast	E71725
Freshstart	377
Freshstart	1028
Gates	22086
General Motors	15965640
General Motors	15029023
General Motors	15963811
Goodyear	62074
Goodyear	61455
MasterPro	22086
NAPA	8767

ACDelco	26264X
CARQUEST	22105
Duralast	E71761
Freshstart	62114
Gates	22105
General Motors	15683910
General Motors	15693910
General Motors	15156272
Goodyear	62114
NAPA	8778

My Vehicle:

1996 Chevrolet K1500 Radiator Coolant Hose

Gates Radiator Coolant Hose 22247 - Upper

Description:

Part Specifications:

Features:

Dayco Radiator Coolant Hose 71914 - Upper

Description:

Part Specifications:

Features:

Dayco Radiator Coolant Hose 71782 - Lower - Tee To Reservoir

Description:

Part Specifications:

Features:

Dayco Radiator Coolant Hose 72087 - Upper

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 19663 - Lower - Reservoir To Tee

Description:

Part Specifications:

Features:

Dayco Radiator Coolant Hose 72088 - Lower

Description:

Part Specifications:

Features:

Dayco Radiator Coolant Hose 71428 - Lower

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 22228 - Upper

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 21941 - Lower

Description:

Part Specifications:

Features:

Dayco Radiator Coolant Hose 71881 - Upper

Description:

Part Specifications:

Features:

Dayco Radiator Coolant Hose 71880 - Upper

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 21710 - Lower

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 22209 - Upper

Description:

Part Specifications:

Features:

Dayco Radiator Coolant Hose 71725 - Lower

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 22086 - Lower

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 25265 - Upper

Description:

Part Specifications:

Features:

Dayco Radiator Coolant Hose 71761 - Lower

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 22105 - Lower

Description:

Part Specifications:

Features:

Related Belts and Cooling Parts

What Is MAP Price?

What Is MAP Price?

Core Return Process

Parts list X

Part added to your Kart X