2015 Chevrolet Express 3500 HVAC Heater Hose

Part Name: HVAC Heater HoseBrand: GatesPart#: 19279

Gates HVAC Heater Hose 19279 - Valve To Auxiliary Heater Pipe-1

Position: Valve To Auxiliary Heater Pipe-1

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 10.8
Inside Diameter 1 : .62
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2015 Chevrolet Express 3500 Engines.
Engine Sub Model Notes Fit Notes Position
4.8L V8 Base, LS, LT W/A.C.; W/Aux. Heater; Cut to fit - Molded Heater Hose Fuel Type: FLEX Valve To Auxiliary Heater Pipe-1
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
4.8L V8	Base, LS, LT	W/A.C.; W/Aux. Heater; Cut to fit - Molded Heater Hose	Fuel Type: FLEX	Valve To Auxiliary Heater Pipe-1

Part Name: HVAC Heater HoseBrand: GatesPart#: 19750

2015 Chevrolet Express 3500 HVAC Heater Hose ZO 19750

Gates HVAC Heater Hose 19750 - Engine To Valve

Position: Engine To Valve

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 13.7
Inside Diameter 1 : .75
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2015 Chevrolet Express 3500 Engines.
Engine Sub Model Notes Fit Notes Position
4.8L V8 Base, LS, LT W/A.C.; W/O Aux. Heater; Cut to fit - Molded Heater Hose Fuel Type: FLEX Engine To Valve
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
4.8L V8	Base, LS, LT	W/A.C.; W/O Aux. Heater; Cut to fit - Molded Heater Hose	Fuel Type: FLEX	Engine To Valve

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87613

2015 Chevrolet Express 3500 HVAC Heater Hose DY 87613

Dayco HVAC Heater Hose 87613 - Pipe-1 To Tee

Position: Pipe-1 To Tee

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Dual I.D. Hose
Trunk Height : 12
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 3/4
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 2015 Chevrolet Express 3500 Engines.
Engine Sub Model Notes Position
6.6L V8 Base, LS, LT Cut to Fit - Small I.D. Heater Hose Pipe-1 To Tee
Part Interchange
ACDelco 16005M
ACDelco 14246S
CARQUEST 19187
CARQUEST 18081
Duralast D87613
Gates 18081
Gates 19187
General Motors 98004178
NAPA 11187
NAPA 10081
V&W 303613
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
6.6L V8	Base, LS, LT	Cut to Fit - Small I.D. Heater Hose	Pipe-1 To Tee

Part Name: HVAC Heater HoseBrand: GatesPart#: 19749

2015 Chevrolet Express 3500 HVAC Heater Hose ZO 19749

Gates HVAC Heater Hose 19749 - Valve To Heater

Position: Valve To Heater

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 8.4
Inside Diameter 1 : .75
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2015 Chevrolet Express 3500 Engines.
Engine Sub Model Notes Fit Notes Position
4.8L V8 Base, LS, LT Cut to fit - Molded Heater Hose Fuel Type: FLEX Valve To Heater
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
4.8L V8	Base, LS, LT	Cut to fit - Molded Heater Hose	Fuel Type: FLEX	Valve To Heater

Part Name: HVAC Heater HoseBrand: GatesPart#: 18933

2015 Chevrolet Express 3500 HVAC Heater Hose ZO 18933

Gates HVAC Heater Hose 18933 - Auxiliary Heater Pipe-1 To Engine

Position: Auxiliary Heater Pipe-1 To Engine

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 15.9
Inside Diameter 1 : .62
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2015 Chevrolet Express 3500 Engines.
Engine Sub Model Notes Fit Notes Position
4.8L V8 Base, LS, LT Cut to fit - Molded Heater Hose Fuel Type: FLEX Auxiliary Heater Pipe-1 To Engine
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
4.8L V8	Base, LS, LT	Cut to fit - Molded Heater Hose	Fuel Type: FLEX	Auxiliary Heater Pipe-1 To Engine

Part Name: HVAC Heater HoseBrand: GatesPart#: 19665

2015 Chevrolet Express 3500 HVAC Heater Hose ZO 19665

Gates HVAC Heater Hose 19665 - Engine To Auxiliary Heater Pipe-2

Position: Engine To Auxiliary Heater Pipe-2

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 13.9
Inside Diameter 1 : .75
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2015 Chevrolet Express 3500 Engines.
Engine Sub Model Notes Fit Notes Position
4.8L V8 Base, LS, LT Cut to fit - Molded Heater Hose Fuel Type: FLEX Engine To Auxiliary Heater Pipe-2
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
4.8L V8	Base, LS, LT	Cut to fit - Molded Heater Hose	Fuel Type: FLEX	Engine To Auxiliary Heater Pipe-2

Part Name: HVAC Heater HoseBrand: GatesPart#: 28466

2015 Chevrolet Express 3500 HVAC Heater Hose ZO 28466

Gates HVAC Heater Hose 28466 - Heater To Valve

Position: Heater To Valve

Description:

90 Deg Molded Heater Hose

Part Specifications:

Centerline Length : 10
Arm Length 1 : 4
Arm Length 1 : 101.6
Arm Length 2 : 6
Arm Length 2 : 152.4
Inside Diameter 1 : .625
Angle : 90

Features:

Specially designed for difficult heater hose applications requiring sharp 90 degree bends in the hose. Eliminates the need for extensive inventory of OE type curved heater hose. Just 22 sizes handle thousands of applications.
- Engineered to resist electrochemical degradation the leading cause of hose failure.
- Resists water permeation.
- Similar to heater SAE 20R3 Type EC Class D-2.
- Use with heater hose connectors and bulk heater hose for virtually complete molded heater hose coverage.
- Temperature Rating: -40F to 275F (-40C to 135C).
Caution: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 2015 Chevrolet Express 3500 Engines.
Engine Sub Model Notes Fit Notes Position
4.8L V8 Base, LS, LT Cut to fit - 90º Molded Heater Hose Fuel Type: FLEX Heater To Valve
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
4.8L V8	Base, LS, LT	Cut to fit - 90º Molded Heater Hose	Fuel Type: FLEX	Heater To Valve

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87881

2015 Chevrolet Express 3500 HVAC Heater Hose DY 87881

Dayco HVAC Heater Hose 87881 - Valve To Engine

Position: Valve To Engine

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 13 1/2
End 1 Inside Diameter : 5/8
End 1 Outside Diameter : 31/32
End 2 Inside Diameter : 5/8
End 2 Outside Diameter : 31/32
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 2015 Chevrolet Express 3500 Engines.
Engine Sub Model Notes Position
4.8L V8 Base, LS, LT w/o Aux. Heater - Small I.D. Heater Hose Valve To Engine
6.0L V8 Base, LS, LT w/o Aux. Heater - Small I.D. Heater Hose Valve To Engine
Part Interchange
ACDelco 16256M
CARQUEST 19082
Chrysler 4595720AB
Duralast D87881
Gates 19082
Goodyear 64336
NAPA 11082
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
4.8L V8	Base, LS, LT	w/o Aux. Heater - Small I.D. Heater Hose	Valve To Engine
6.0L V8	Base, LS, LT	w/o Aux. Heater - Small I.D. Heater Hose	Valve To Engine

Part Name: HVAC Heater HoseBrand: GatesPart#: 19082

2015 Chevrolet Express 3500 HVAC Heater Hose ZO 19082

Gates HVAC Heater Hose 19082 - Valve To Engine

Position: Valve To Engine

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 19.6
Inside Diameter 1 : .59
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2015 Chevrolet Express 3500 Engines.
Engine Sub Model Notes Fit Notes Position
4.8L V8 Base, LS, LT W/A.C.; W/O Aux. Heater; Cut to fit - Molded Heater Hose Fuel Type: FLEX Valve To Engine
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
4.8L V8	Base, LS, LT	W/A.C.; W/O Aux. Heater; Cut to fit - Molded Heater Hose	Fuel Type: FLEX	Valve To Engine

Part Name: HVAC Heater HoseBrand: GatesPart#: 19729

2015 Chevrolet Express 3500 HVAC Heater Hose ZO 19729

Gates HVAC Heater Hose 19729 - Auxiliary Heater Pipe-2 To Valve

Position: Auxiliary Heater Pipe-2 To Valve

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 10.5
Inside Diameter 1 : .73
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2015 Chevrolet Express 3500 Engines.
Engine Sub Model Notes Fit Notes Position
4.8L V8 Base, LS, LT W/A.C.; W/Aux. Heater - Molded Heater Hose Fuel Type: FLEX Auxiliary Heater Pipe-2 To Valve
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
4.8L V8	Base, LS, LT	W/A.C.; W/Aux. Heater - Molded Heater Hose	Fuel Type: FLEX	Auxiliary Heater Pipe-2 To Valve

Part Name: HVAC Heater HoseBrand: DaycoPart#: 87661

2015 Chevrolet Express 3500 HVAC Heater Hose DY 87661

Dayco HVAC Heater Hose 87661 - Valve To Auxiliary Heater Pipe

Position: Valve To Auxiliary Heater Pipe

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 6
End 1 Inside Diameter : 5/8
End 2 Inside Diameter : 5/8
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments

This Part Fits Following 2015 Chevrolet Express 3500 Engines.

Engine	Sub Model	Notes	Position
4.8L V8	Base, LS, LT	w/A.C., w/Aux. Heater - Small I.D. Heater Hose	Valve To Auxiliary Heater Pipe
6.0L V8	Base, LS, LT	w/A.C., w/Aux. Heater - Small I.D. Heater Hose	Valve To Auxiliary Heater Pipe

Part Interchange

ACDelco	14316S
ACDelco	14106S
ACDelco	14368S
ACDelco	14426S
CARQUEST	18799
CARQUEST	19088
CARQUEST	19279
CARQUEST	19376
Chrysler	05005375AB
Chrysler	05005370AC
Chrysler	05505375AB
Duralast	B87661
Gates	19376
Gates	19279
Gates	18799
Gates	19088
General Motors	25668357
General Motors	25681952
General Motors	25668354
General Motors	15755548
Goodyear	64314
NAPA	10799
NAPA	11088
NAPA	11279
NAPA	11151
V&W	303661

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: DaycoPart#: 88497

2015 Chevrolet Express 3500 HVAC Heater Hose DY 88497

Dayco HVAC Heater Hose 88497 - Engine To Heater

Position: Engine To Heater

Description:

MOLDED HEATER HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 19
End 1 Inside Diameter : 3/4
End 1 Outside Diameter : 1 3/32
End 2 Inside Diameter : 3/4
End 2 Outside Diameter : 1 3/32
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R3 Class D-1, SAE J1684 Type EC

Features:

Dayco® Small I.D. Molded Heater Hose is designed to replace OEM coolant hose in applications where molded hose in small diameters (1" I.D. or smaller) is required. The molded configuration eliminates the need for multiple connections of hoses and clamps. The knitted reinforcement and synthetic EPDM construction provides high strength and resistance to detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). In addition to meeting SAE J20R4, Class D-1 requirements, this hose is designed to meet Type EC electro-chemical requirements as specified in SAE J1684. If the OE parts have a “quick connect” end, Dayco’s Small I.D. Molded Heater Hoses are also made with the quick connect assembled onto the hose for fast, convenient installation.

Condition: New

Fitments
This Part Fits Following 2015 Chevrolet Express 3500 Engines.
Engine Sub Model Notes Position
4.8L V8 Base, LS, LT w/o A.C., w/o Aux. Heater - Small I.D. Heater Hose Engine To Heater
6.0L V8 Base, LS, LT w/o A.C., w/o Aux. Heater - Small I.D. Heater Hose Engine To Heater
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
4.8L V8	Base, LS, LT	w/o A.C., w/o Aux. Heater - Small I.D. Heater Hose	Engine To Heater
6.0L V8	Base, LS, LT	w/o A.C., w/o Aux. Heater - Small I.D. Heater Hose	Engine To Heater

Part Name: HVAC Heater HoseBrand: GatesPart#: 19761

2015 Chevrolet Express 3500 HVAC Heater Hose ZO 19761

Gates HVAC Heater Hose 19761 - Engine To Heater

Position: Engine To Heater

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 30.7
Inside Diameter 1 : .74
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2015 Chevrolet Express 3500 Engines.
Engine Sub Model Notes Fit Notes Position
4.8L V8 Base, LS, LT W/O A.C.; W/O Aux. Heater - Molded Heater Hose Fuel Type: FLEX Engine To Heater
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
4.8L V8	Base, LS, LT	W/O A.C.; W/O Aux. Heater - Molded Heater Hose	Fuel Type: FLEX	Engine To Heater

Part Name: HVAC Heater HoseBrand: GatesPart#: 28409

2015 Chevrolet Express 3500 HVAC Heater Hose ZO 28409

Gates HVAC Heater Hose 28409 - Radiator To Reservoir

Position: Radiator To Reservoir

Description:

Straight Heater Hose Standard

Part Specifications:

Centerline Length : 50
Centerline Length : 15.24
Centerline Length : 600
Inside Diameter 1 : .375
Working Pressure : 60
Weight Per Length : 8.25 lbs./Carton

Features:

Premium hose constructed for long service life.
- Unaffected by most coolants and non-oil based coolant additives and by high cooling system pressures
- Good resistance to high temperatures for extended periods of time
- Similar to SAE 20R3 Class D-2
- Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 2015 Chevrolet Express 3500 Engines.
Engine Sub Model Notes Fit Notes Position
4.8L V8 Base, LS, LT Cut to Length, 9" - Straight Heater Hose (Standard) Fuel Type: FLEX Radiator To Reservoir
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
4.8L V8	Base, LS, LT	Cut to Length, 9" - Straight Heater Hose (Standard)	Fuel Type: FLEX	Radiator To Reservoir

Part Name: HVAC Heater HoseBrand: GatesPart#: 24481

2015 Chevrolet Express 3500 HVAC Heater Hose ZO 24481

Gates HVAC Heater Hose 24481 - Heater Inlet

Position: Heater Inlet

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 30.4
Inside Diameter 1 : .63
Inside Diameter 2 : .72
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2015 Chevrolet Express 3500 Engines.
Engine Sub Model Notes Fit Notes Position
6.0L V8 Base, LS, LT Molded Coolant Hose Fuel Type: CNG, FLEX Heater Inlet
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
6.0L V8	Base, LS, LT	Molded Coolant Hose	Fuel Type: CNG, FLEX	Heater Inlet

Part Name: HVAC Heater HoseBrand: GatesPart#: 28411

2015 Chevrolet Express 3500 HVAC Heater Hose ZO 28411

Gates HVAC Heater Hose 28411 - Heater To Auxiliary Heater Pipe-1, Heater To Engine

Position: Heater To Auxiliary Heater Pipe-1, Heater To Engine

Description:

Straight Heater Hose Standard

Part Specifications:

Centerline Length : 50
Centerline Length : 15.24
Centerline Length : 600
Inside Diameter 1 : .625
Working Pressure : 60
Weight Per Length : 11.70 lbs./Carton

Features:

Premium hose constructed for long service life.
- Unaffected by most coolants and non-oil based coolant additives and by high cooling system pressures
- Good resistance to high temperatures for extended periods of time
- Similar to SAE 20R3 Class D-2
- Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments

This Part Fits Following 2015 Chevrolet Express 3500 Engines.

Engine	Sub Model	Notes	Fit Notes	Position
4.8L V8	Base, LS, LT	W/O A.C.; W/O Aux. Heater; Cut to Length, 22" - Straight Heater Hose (Standard)	Fuel Type: FLEX	Heater To Auxiliary Heater Pipe-1, Heater To Engine

Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: HVAC Heater HoseBrand: GatesPart#: 24477

2015 Chevrolet Express 3500 HVAC Heater Hose ZO 24477

Gates HVAC Heater Hose 24477 - Heater To Reservoir

Position: Heater To Reservoir

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 22.63
Number of Branches : 1
Inside Diameter 1 : 1
Inside Diameter 2 : .75
Inside Diameter 3 : .75
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2015 Chevrolet Express 3500 Engines.
Engine Sub Model Notes Fit Notes Position
6.0L V8 Base, LS, LT Molded Coolant Hose Fuel Type: CNG, FLEX Heater To Reservoir
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
6.0L V8	Base, LS, LT	Molded Coolant Hose	Fuel Type: CNG, FLEX	Heater To Reservoir

Part Name: HVAC Heater HoseBrand: GatesPart#: 23808

2015 Chevrolet Express 3500 HVAC Heater Hose ZO 23808

Gates HVAC Heater Hose 23808 - Reservoir To Radiator

Position: Reservoir To Radiator

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 24.25
Number of Branches : 1
Inside Diameter 1 : .5
Inside Diameter 2 : .5
Inside Diameter 3 : .15
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2015 Chevrolet Express 3500 Engines.
Engine Sub Model Notes Fit Notes Position
6.0L V8 Base, LS, LT Molded Coolant Hose Fuel Type: CNG, FLEX Reservoir To Radiator
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
6.0L V8	Base, LS, LT	Molded Coolant Hose	Fuel Type: CNG, FLEX	Reservoir To Radiator

Part Name: HVAC Heater HoseBrand: GatesPart#: 28412

2015 Chevrolet Express 3500 HVAC Heater Hose ZO 28412

Gates HVAC Heater Hose 28412 - Auxiliary Heater Pipe-2 To Heater

Position: Auxiliary Heater Pipe-2 To Heater

Description:

Straight Heater Hose Standard

Part Specifications:

Centerline Length : 50
Centerline Length : 15.24
Centerline Length : 600
Inside Diameter 1 : .75
Working Pressure : 50
Weight Per Length : 13.20 lbs./Carton

Features:

Premium hose constructed for long service life.
- Unaffected by most coolants and non-oil based coolant additives and by high cooling system pressures
- Good resistance to high temperatures for extended periods of time
- Similar to SAE 20R3 Class D-2
- Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
CAUTION: Do not use for fuel or oil transfer applications.
Gates Powering Progress

Per Car Quantity: 2

Condition: New

Fitments
This Part Fits Following 2015 Chevrolet Express 3500 Engines.
Engine Sub Model Notes Fit Notes Position
4.8L V8 Base, LS, LT W/O A.C.; W/Aux. Heater; Cut to Length, 23" - Straight Heater Hose (Standard) Fuel Type: FLEX Auxiliary Heater Pipe-2 To Heater
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

ACDelco	16005M
ACDelco	14246S
CARQUEST	19187
CARQUEST	18081
Duralast	D87613
Gates	18081
Gates	19187
General Motors	98004178
NAPA	11187
NAPA	10081
V&W	303613

ACDelco	16256M
CARQUEST	19082
Chrysler	4595720AB
Duralast	D87881
Gates	19082
Goodyear	64336
NAPA	11082

My Vehicle:

2015 Chevrolet Express 3500 HVAC Heater Hose

Gates HVAC Heater Hose 19279 - Valve To Auxiliary Heater Pipe-1

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19750 - Engine To Valve

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87613 - Pipe-1 To Tee

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19749 - Valve To Heater

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 18933 - Auxiliary Heater Pipe-1 To Engine

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19665 - Engine To Auxiliary Heater Pipe-2

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28466 - Heater To Valve

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87881 - Valve To Engine

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19082 - Valve To Engine

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19729 - Auxiliary Heater Pipe-2 To Valve

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 87661 - Valve To Auxiliary Heater Pipe

Description:

Part Specifications:

Features:

Dayco HVAC Heater Hose 88497 - Engine To Heater

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 19761 - Engine To Heater

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28409 - Radiator To Reservoir

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 24481 - Heater Inlet

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28411 - Heater To Auxiliary Heater Pipe-1, Heater To Engine

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 24477 - Heater To Reservoir

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 23808 - Reservoir To Radiator

Description:

Part Specifications:

Features:

Gates HVAC Heater Hose 28412 - Auxiliary Heater Pipe-2 To Heater

Description:

Part Specifications:

Features:

Related HVAC Parts

What Is MAP Price?