2006 Chevrolet Cobalt Radiator Coolant Hose

Part Name: Radiator Coolant HoseBrand: DaycoPart#: 70704

Dayco Radiator Coolant Hose 70704 - Lower - Tee To Radiator

Position: Lower - Tee To Radiator

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 9
End 1 Inside Diameter : 1 15/16
End 2 Inside Diameter : 1 15/16
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Condition: New

Fitments
This Part Fits Following 2006 Chevrolet Cobalt Engines.
Engine Sub Model Notes Position
2.4L L4 SS Cut to Fit - Curved Radiator Hose Lower - Tee To Radiator

Engine	Sub Model	Notes	Position
2.4L L4	SS	Cut to Fit - Curved Radiator Hose	Lower - Tee To Radiator

Part Interchange

ACDelco	20473S
ACDelco	27158X
ACDelco	20046S
ACDelco	20166S
ACDelco	20467S
Beck/Arnley	142-2849
Beck/Arnley	142-3607
Beck/Arnley	142-2815
Beck/Arnley	142-5769
Beck/Arnley	142-0942
Beck/Arnley	142-0256
CARQUEST	20661
CARQUEST	23235
CARQUEST	21457
Chrysler	05291896AC
Daihatsu	16573-87601-000
Daihatsu	16572-87613-000
Datsun/Nissan	21501-3H000
Duralast	B70704
Ford	SBA-310160050
Ford	FEH5-15-185A
Ford	F32Z-8548-EA
Ford	F32Z-8548-E
Ford	E0ZE-8B274-HA
Ford	F32Z-8548-B
Ford	D9HZ-8548-B
Ford	5F9Z-8286-AA
Freshstart	62768
Freshstart	62724
Freshstart	575
Gates	23235
Gates	24263
Gates	20661
Gates	23169
Gates	21457
General Motors	10413567
General Motors	14104459
General Motors	10295971
General Motors	10295972
General Motors	94845114
General Motors	22717580
General Motors	10403194
General Motors	22728076
General Motors	10135658
Goodyear	62724
Goodyear	62768
Goodyear	66550
Goodyear	60425
Goodyear	60781
Hyundai	25472-23200
Hyundai	25480-23000
Kubota	15601-7294-1
Kubota	15371-7294-1
Land Rover	PCH500941
Lazorlite	L34-1207
Lazorlite	L34-2661
Lazorlite	L34-1720
Massey Ferguson	973443M1
Massey Ferguson	943443M1
Massey Ferguson	732443M1
Mazda	KL11-15-189A
Mazda	KL55-15-189
Mazda	KL55-15-189A
Motorcraft	KM1162
Motorcraft	KM4806
Motorcraft	KM657
Motorcraft	KM1023
Motorcraft	KM1247
NAPA	16930
NAPA	7446
NAPA	8171
NAPA	9830
NAPA	9943
Pirelli	MR XDV48-2
Pirelli	41055
Suzuki	17841-52D00
Suzuki	17841-77E00
Toyota	90916-01062
Toyota	90916-01013
Toyota	16573-16020
Toyota	16573-16030
Toyota	90916-01169
Toyota	90916-01045
Toyota	90916-01144
Toyota	90916-01049
Toyota	90916-01101
Uniroyal	MC211
White	1664844

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: Radiator Coolant HoseBrand: DaycoPart#: 72338

2006 Chevrolet Cobalt Radiator Coolant Hose DY 72338

Dayco Radiator Coolant Hose 72338 - Lower - Tee To Radiator

Position: Lower - Tee To Radiator

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 19
End 1 Inside Diameter : 1 5/16
End 2 Inside Diameter : 1 5/16
Contains Protective Sleeve : Y
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Condition: New

Fitments
This Part Fits Following 2006 Chevrolet Cobalt Engines.
Engine Sub Model Notes Position
2.2L L4 LS, LT, LTZ Curved Radiator Hose Lower - Tee To Radiator
Part Interchange
ACDelco 24581L
CARQUEST 23165
Duralast E72338
Freshstart 62752
Gates 23165
General Motors 15270511
Goodyear 62752
NAPA 9826
Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Position
2.2L L4	LS, LT, LTZ	Curved Radiator Hose	Lower - Tee To Radiator

Part Name: Radiator Coolant HoseBrand: DaycoPart#: 81021

2006 Chevrolet Cobalt Radiator Coolant Hose DY 81021

Dayco Radiator Coolant Hose 81021 - Lower - Tee To Radiator

Position: Lower - Tee To Radiator

Description:

FLEX RADIATOR HOSE STANDARD DAYCO

Features:

Precision molded in standard lengths, Dayco’s Flex Radiator Hose is designed to replace straight or molded radiator hoses. The knitted reinforcement and synthetic EPDM construction meets SAE J20R4, Class D-2 requirements. This hose is designed to prevent splitting, ballooning, and elongation; and, resists ozone and other detrimental environmental elements, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C). The corrugations provide excellent hose flexibility without flattening or collapse. This Flex Radiator Hose is another Dayco® product proudly made in the USA. Note: This hose is NOT suitable for fuel or oil transfer.

Condition: New

Fitments
This Part Fits Following 2006 Chevrolet Cobalt Engines.
Engine Sub Model Notes Position
2.4L L4 SS Flex Radiator Hose Lower - Tee To Radiator

Engine	Sub Model	Notes	Position
2.4L L4	SS	Flex Radiator Hose	Lower - Tee To Radiator

Part Interchange

ACDelco	31609
Atlas	516
Atlas	525
AutoZone	C6403
Autopar	RH62
BMW	105 51 01 628 00
Bowes	1109
CARQUEST	25250
Chief	C6403
Conoco	FH18
Duralast	81021
Ford	C6TA-8260-Z
Ford	C9PZ-8260-V
Ford	C2RZ-8260-A
Freshstart	1109
Gates	26403
Gates	25250
Goodyear	52010
Gulf	5010
John Deere	T25033
Mobil	5M9
Mopar	BH602
Motorcraft	KA094
NAPA	FM80
Pirelli	509
Texaco	1109
Texaco	136
Uniroyal	5010
Uniroyal	FC516
V&W	1109

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: Radiator Coolant HoseBrand: GatesPart#: 21942

2006 Chevrolet Cobalt Radiator Coolant Hose ZO 21942

Gates Radiator Coolant Hose 21942 - Lower - Radiator To Tee-1

Position: Lower - Radiator To Tee-1

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 10.8
Inside Diameter 1 : 1.19
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2006 Chevrolet Cobalt Engines.
Engine Sub Model Notes Fit Notes Position
2.4L L4 SS Cut to fit - Molded Coolant Hose Fuel Type: GAS Lower - Radiator To Tee-1
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.4L L4	SS	Cut to fit - Molded Coolant Hose	Fuel Type: GAS	Lower - Radiator To Tee-1

Part Name: Radiator Coolant HoseBrand: GatesPart#: 19847

2006 Chevrolet Cobalt Radiator Coolant Hose ZO 19847

Gates Radiator Coolant Hose 19847 - Lower - Tee-1 To Reservoir

Position: Lower - Tee-1 To Reservoir

Description:

Molded Heater Hose

Part Specifications:

Centerline Length : 8.6
Inside Diameter 1 : .75
Number of Branches : 0

Features:

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.
- Similar to OEM specifications.
- Has all the quality features of Gates Molded Coolant Hose.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Inside diameters range from 1/4 to 1 .
- Meets SAE 20R3 type EC Class D-1 and D-2 specifications.
Temperature rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2006 Chevrolet Cobalt Engines.
Engine Sub Model Notes Fit Notes Position
2.4L L4 SS Molded Heater Hose Fuel Type: GAS Lower - Tee-1 To Reservoir
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.4L L4	SS	Molded Heater Hose	Fuel Type: GAS	Lower - Tee-1 To Reservoir

Part Name: Radiator Coolant HoseBrand: DaycoPart#: 71396

2006 Chevrolet Cobalt Radiator Coolant Hose DY 71396

Dayco Radiator Coolant Hose 71396 - Upper

Position: Upper

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 15 1/2
End 1 Inside Diameter : 1 3/16
End 2 Inside Diameter : 1 3/16
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Condition: New

Fitments

This Part Fits Following 2006 Chevrolet Cobalt Engines.

Engine	Sub Model	Notes	Fit Notes	Position
2.2L L4	LS, LT, LTZ	Cut to Fit - Curved Radiator Hose	Transmission Control Type: Standard	Upper
2.4L L4	SS	Cut to Fit - Curved Radiator Hose	Transmission Control Type: Standard	Upper

Part Interchange

ACDelco	22168M
ACDelco	22221M
ACDelco	22576M
CARQUEST	21670
CARQUEST	23166
CARQUEST	21390
Chrysler	04596335AC
Chrysler	4596335AA
Duralast	D71396
Freshstart	540
Gates	23166
Gates	21670
Gates	21390
General Motors	22709850
Goodyear	62716
Goodyear	61483
Goodyear	62586
Honda	19501-PK1-000
Honda	19501-PK2-000
NAPA	9827
NAPA	8384
NAPA	8087
Pirelli	41483
Toyota	16573-74020

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: Radiator Coolant HoseBrand: DaycoPart#: 71794

2006 Chevrolet Cobalt Radiator Coolant Hose DY 71794

Dayco Radiator Coolant Hose 71794 - Upper

Position: Upper

Description:

CURVED RADIATOR HOSE DAYCO

Part Specifications:

Hose Type : Single I.D. Hose
Trunk Height : 13
End 1 Inside Diameter : 1 11/32
End 2 Inside Diameter : 1 11/32
Contains Protective Sleeve : N
Contains Heat Shield : N
Color : Black
Material : EPDM
SAE Specification : SAE J20R4 Class D-1, SAE J1684 Type EC

Features:

Dayco® Molded Radiator and By-Pass Hose with knitted reinforcement and all synthetic EPDM rubber construction provides the high strength and resistance to oil, mud, salt, road debris, ozone, coolants, and temperature variations of -40°F (-40°C) to +257°F (+125°C) that are required for OEM hose replacements. The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose. In addition to meeting SAE J20R4, Class D-1 requirements, this hose is now designed to meet Type EC electro-chemical requirements as specified in SAE J1684; which prevents inner tube deterioration caused by the build up of static electric charges.

Condition: New

Fitments
This Part Fits Following 2006 Chevrolet Cobalt Engines.
Engine Sub Model Notes Fit Notes Position
2.2L L4 LS, LT, LTZ Curved Radiator Hose Transmission Control Type: Automatic Upper
2.4L L4 SS Curved Radiator Hose Transmission Control Type: Automatic Upper

Engine	Sub Model	Notes	Fit Notes	Position
2.2L L4	LS, LT, LTZ	Curved Radiator Hose	Transmission Control Type: Automatic	Upper
2.4L L4	SS	Curved Radiator Hose	Transmission Control Type: Automatic	Upper

Part Interchange

ACDelco	22312M
ACDelco	22576M
CARQUEST	23166
CARQUEST	22183
Datsun/Nissan	21501-2Y000
Datsun/Nissan	21501-31U10
Datsun/Nissan	21501-31U00
Duralast	C71794
Freshstart	62651
Gates	23166
Gates	22183
General Motors	22709846
Goodyear	62651
Mitsubishi	MN156404
NAPA	8927
NAPA	8843
Toyota	16572-07040

Warranty & Easy Return
Manufacturer’s Warranty : 12 Months/12,000 Miles
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty or 2 years whichever is the highest.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Part Name: Radiator Coolant HoseBrand: GatesPart#: 23166

2006 Chevrolet Cobalt Radiator Coolant Hose ZO 23166

Gates Radiator Coolant Hose 23166 - Upper

Position: Upper

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 14.7
Inside Diameter 1 : 1.30
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2006 Chevrolet Cobalt Engines.
Engine Sub Model Notes Fit Notes Position
2.2L L4 LS, LT, LTZ Molded Coolant Hose Fuel Type: GAS Upper
2.4L L4 SS Molded Coolant Hose Fuel Type: GAS Upper
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.2L L4	LS, LT, LTZ	Molded Coolant Hose	Fuel Type: GAS	Upper
2.4L L4	SS	Molded Coolant Hose	Fuel Type: GAS	Upper

Part Name: Radiator Coolant HoseBrand: GatesPart#: 23161

2006 Chevrolet Cobalt Radiator Coolant Hose ZO 23161

Gates Radiator Coolant Hose 23161 - Lower - Tee-1 To Water Pump

Position: Lower - Tee-1 To Water Pump

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 17.4
Inside Diameter 1 : 1.30
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2006 Chevrolet Cobalt Engines.
Engine Sub Model Notes Fit Notes Position
2.4L L4 SS Molded Coolant Hose Fuel Type: GAS Lower - Tee-1 To Water Pump
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.4L L4	SS	Molded Coolant Hose	Fuel Type: GAS	Lower - Tee-1 To Water Pump

Part Name: Radiator Coolant HoseBrand: GatesPart#: 23165

2006 Chevrolet Cobalt Radiator Coolant Hose ZO 23165

Gates Radiator Coolant Hose 23165 - Lower

Position: Lower

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 22.3
Inside Diameter 1 : 1.30
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2006 Chevrolet Cobalt Engines.
Engine Sub Model Notes Fit Notes Position
2.2L L4 LS, LT, LTZ Molded Coolant Hose Fuel Type: GAS Lower
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

Engine	Sub Model	Notes	Fit Notes	Position
2.2L L4	LS, LT, LTZ	Molded Coolant Hose	Fuel Type: GAS	Lower

Part Name: Radiator Coolant HoseBrand: GatesPart#: 23125

2006 Chevrolet Cobalt Radiator Coolant Hose ZO 23125

Gates Radiator Coolant Hose 23125 - Upper

Position: Upper

Description:

Molded Coolant Hose

Part Specifications:

Centerline Length : 17.4
Inside Diameter 1 : 1.30
Number of Branches : 0
Contains Spring : No

Features:

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
- Recommend for upper, lower, by-pass, heater and other coolant hose applications.
- Heat and ozone resistant cover.
- Engineered to resist electrochemical degradation - the leading cause of hose failure.
- Re-engineered materials resist vacuum collapse. This reduces the need for internal springs in many applications.
- Meets SAE 20R4 and 20R3 Type EC Class D-1 and D-2 specifications.
Temperature Rating: -40 F to 275 F (-40 C to 135 C) in coolant hose applications.
Note: Gates recommends replacing standard worm drive and spring loaded clamps with Gates PowerGrip(R) SB Clamps each time a new coolant hose is installed.
Gates - Powering Progress

Condition: New

Fitments
This Part Fits Following 2006 Chevrolet Cobalt Engines.
Engine Sub Model Notes Fit Notes Position
2.0L L4 SS Molded Coolant Hose Fuel Type: GAS Upper
Warranty & Easy Return
Manufacturer’s Warranty : Limited Lifetime
You can return the part within 30 days for any reasons.
After 30 days, all parts are covered under manufacturer’s warranty.
Refunds get issued within 24 to 48 hours to your mode of payment after return part received.

ACDelco	24581L
CARQUEST	23165
Duralast	E72338
Freshstart	62752
Gates	23165
General Motors	15270511
Goodyear	62752
NAPA	9826

My Vehicle:

2006 Chevrolet Cobalt Radiator Coolant Hose

Dayco Radiator Coolant Hose 70704 - Lower - Tee To Radiator

Description:

Part Specifications:

Features:

Dayco Radiator Coolant Hose 72338 - Lower - Tee To Radiator

Description:

Part Specifications:

Features:

Dayco Radiator Coolant Hose 81021 - Lower - Tee To Radiator

Description:

Features:

Gates Radiator Coolant Hose 21942 - Lower - Radiator To Tee-1

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 19847 - Lower - Tee-1 To Reservoir

Description:

Part Specifications:

Features:

Dayco Radiator Coolant Hose 71396 - Upper

Description:

Part Specifications:

Features:

Dayco Radiator Coolant Hose 71794 - Upper

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 23166 - Upper

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 23161 - Lower - Tee-1 To Water Pump

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 23165 - Lower

Description:

Part Specifications:

Features:

Gates Radiator Coolant Hose 23125 - Upper

Description:

Part Specifications:

Features:

Related Belts and Cooling Parts

What Is MAP Price?

What Is MAP Price?

Core Return Process

Parts list X

Part added to your Kart X

Find exact fit part for your car. X